7 ай бұрын
10 ай бұрын
Жыл бұрын
Жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
Пікірлер
@thebehemoth1998 9 күн бұрын
Glad you tried
@06Angry 11 күн бұрын
you are still alive? iam kidding
@DIYRepairHour 11 күн бұрын
@@06Angry alive but busy :(
@Roman00744 12 күн бұрын
Nice job, those were great cards back in the day, I had a 290, still have it somewhere, looks like the cards worked pretty hard mining for many years, I bought a few ex mining cards and mined on few myself and they all still work but most are 2000 and 3000 series from Ngreedia and a few 6000 series AMD. Got a dead Gamerock 3080 that I bought for 100$ on marketplace a few months ago that I need to get to someday. Very nice of you to give them away.
@DIYRepairHour 12 күн бұрын
Yeah the cards seem well built, but worn. I suspected mining as well, but they might have been working on something else as well, like folding-at-home or something. The gamerock with fake diamonds? That is one weird looking card :D
@Roman00744 11 күн бұрын
@@DIYRepairHour lol yeah that gamerock, yep can't decide if I hate it or like it, I don't like RGB but on that card it's interesting looking.
@Wizard-kk4lz 13 күн бұрын
Cheers for the vid, really informative. Big up to the donors for donating the cards. Four out of five is very good: top job! It's really nice of you to give the cards away as well.
@DIYRepairHour 13 күн бұрын
They are all gone, and in fact most of the cards that were in the giveaway box are now gone. All is left is the very very old radeon and two gts240... so it is definately worth doing, if people find them useful still.
@mart43 13 күн бұрын
Hey, next time you use isopropyl alcohol to find a shorted component, try pulsing the power supply. It gives a clearer indication as the alcohol reacts in waves. Also, nice use of the 'calibrated wire' 😂😜👍
@DIYRepairHour 13 күн бұрын
Yeah, should have done that. Will remember for the next time, thank you :)
@amtpdb1 13 күн бұрын
Very good job. Thanks for the video.
@ProdevsCodingChannel 17 күн бұрын
Great, but Can I Know Where Do I get the electronic components?
@DIYRepairHour 17 күн бұрын
@@ProdevsCodingChannel I try to source from DigiKey first. If they don't have it, I use my donor boards, and if I can't find it there I go to AliExpress.
@justsomedeathstar4736 12 күн бұрын
I tend to just buy a m.2 to usb c external ssd adapter or a pcie card
@DimasKurniawan 18 күн бұрын
How much vram voltage need ? I have all voltage on gpu but vram only 1.3v ?
@DIYRepairHour 18 күн бұрын
@@DimasKurniawan 1.3v is perfect:)
@DimasKurniawan 18 күн бұрын
@@DIYRepairHour ah oke dead core i think. Power drawn 1.4A and 18W. But pex 60ohm
@DimasKurniawan 18 күн бұрын
@@DIYRepairHour or failed bios. And no bios for gamerock palit 1080 ti
@DimasKurniawan 18 күн бұрын
@@DIYRepairHour run mats mod got nvrm vbios failed or something
@DIYRepairHour 18 күн бұрын
@@DimasKurniawan try BIOS first
@MegaBloob 24 күн бұрын
Hello, friend! I have this same monitor and I also love it, lmao! I keep replacing these faulty capacitors for a couple of years now. The problem is that I've just being dumb during the last replacement and I cut a white wire of the white conector that goes right next to the black power conector (it has 4 white wires and a black one). Do you have any idea how can I fix it? I thought about soldering the wire but it is really small and I have just a regular soldering iron. I also couldn't find the name of this conector so I could buy another one, cut all wires and crimp it again. Thank you so much for your time reading this, I'm kinda desperate to fix it! <3
@MegaBloob 24 күн бұрын
Ok, so I couldn't wait any longer and tried to solder the broken wire again. It actually worked, I can't believe it.....
@DIYRepairHour 24 күн бұрын
@@MegaBloob I'm glad it did. I do not have this monitor any more :(
@MegaBloob 24 күн бұрын
@@DIYRepairHour I see! I intend to keep it until I die... lmao xD Couldn't find good colours like it has in any modern monitor so far!
@expressings8320 Ай бұрын
I have a similar problem the port to the power is making a squeaking noise do you think it's fixable?
@DIYRepairHour Ай бұрын
Thats a different issue, but noise is normally caused by coils, as capacitor is slowly becoming a resistor and the higher ripple. Recap should help :)
@drinkintea1572 Ай бұрын
Doable (lie)
@DIYRepairHour Ай бұрын
Doable for sure, but the cost of a working one is not worth the repair, as the PCB is damaged. When it comes to power supplies I have a trust issue :)
@reaganlewis9074 Ай бұрын
Hi sir I have the same card the fan stop spinng when I boot in windows but the hdmi works I have display but windows don't detected the card now I cant load the graphics drivers
@DIYRepairHour Ай бұрын
Hi, surely if you have picture out the card must be detected, unless you are using iGPU built into your CPU?
@reaganlewis9074 Ай бұрын
Hi tnx for the feedback im not a pc wizard. So I don't know hoe to disable it or what toe do. I did watch some videos on igpu and change some setting in the bios but still no gpu detected
@DIYRepairHour Ай бұрын
@@reaganlewis9074 i'm just confused about the card not detected part. Normally that means no display out at all, so something is clearly working. Could you explain what you mean by not detected?
@reaganlewis9074 Ай бұрын
Wen I go in device manager open display it only show onboard graphics and sorry man it's a 1050ti 4gig daul fan card not 1080. but still it don't show the card and wen I go online to nivida wepsite it don't load the drivers it don't detected the card
@DIYRepairHour Ай бұрын
@@reaganlewis9074 Oh so the display is from onboard graphics then. No detect is often caused by missing power rail. The card needs to be opened and measured for resistances, as well for voltages.
@farizfadillah7557 Ай бұрын
idk why, but PNY, Galax, Digital Alliance, and Palit seems have same cooler design..
@DIYRepairHour Ай бұрын
To summarise the faults on this "good PCB": - 5V regulator not working - 12V leaking to 3.3V when 5V is enabled and running - HDMI port needs replacing - PEX buck replaced - Shorted PWM signal in one of the fans
@MrRoccale Ай бұрын
gave it [email protected] for science ⚡⚡
@DIYRepairHour Ай бұрын
@@MrRoccale yes!
@mart43 Ай бұрын
Damn, I thought the core was done for, but somehow it survived the whole ordeal.
@DIYRepairHour Ай бұрын
@@mart43 same :) but the only way to really know was to fix the PCB.
@manga99uk 2 ай бұрын
Do you go on to sell these cards after fixing them your doing a great job getting them working again keep up the great work
@DIYRepairHour 2 ай бұрын
I do not actively sell them, but if someone is willing to buy, I will. In that case the price will be much lower than ongoing market price, for obvious reasons. And thank you for watching :)
@kepler104 2 ай бұрын
Nice job. Yes too much flux first time. Also would like to mention on this stype of preheaters people dont usually lift the gpus I think, because the heat transfer becomes poor, they just use like something in between the pcb and preheater like a very thin silicone mat or baking paper etc
@DIYRepairHour 2 ай бұрын
Thank you :) And yes, I did not have anything I could use at that time, but since then I added baking paper to my tool stash
@mart43 2 ай бұрын
You did a great job, with the tools you had. Are you planning to do more GPU work?
@DIYRepairHour 2 ай бұрын
Thanks. And of course I do. After part 2 of this video I have raw video material done with cards from viewers. Also have more GPUs, motherboards and automotive repairs:)
@ajr4878 3 ай бұрын
Is the "alcohol method" to determine heat by how fast it evaporates?
@DIYRepairHour 3 ай бұрын
In short - yes. But it's also about the pattern of evaporation. The part that is still liquid tends to move in the presence of sudden heat.
@ajr4878 3 ай бұрын
@@DIYRepairHour brilliant! 🧠🤯
@ajr4878 3 ай бұрын
Thank you for the content!
@jimle22 3 ай бұрын
Way to go dude. I wish I could play like you. I have one of these boards which worked well for my xplane sim. it went dark and was getting hot. Maybe I will try to fix?
@markholmes8803 3 ай бұрын
its like a new card good job.
@DIYRepairHour 3 ай бұрын
thank you :) it serves its purpose again as well
@hombreimbisible3504 3 ай бұрын
Very good repair. I like to see how you improve with each new video. I think I've seen you use superglue a couple of times if I'm not mistaken. Please do not use it, it becomes very toxic when you apply heat, and it also comes off. You can use silicone for ovens or even better transparent UV mask to stick the new pad to the plate after cleaning the flux very well. The pad will not come off. That 3080 has been reborn (what a luck)
@DIYRepairHour 3 ай бұрын
Thank you :) and for the excellent tip with a transparent UV mask as well. I'll order some now, just to have it on hand. It's true that I used super glue, and that's because I had nothing better to apply.
@mart43 3 ай бұрын
You got very lucky my guy!
@DIYRepairHour 3 ай бұрын
Yeah this card was a gamble for sure 😁
@RuwanTech 3 ай бұрын
Nice pad restoration 👍
@DIYRepairHour 3 ай бұрын
Thank you :-)
@kapilvijay9141 4 ай бұрын
Sir i have another ssd 2 empty which mean there is no connector its inneed to be solder, now my question is can i solder a new m.2 connector and solder the pin and add the new m.2 ssd 2 1tb, will it read coz i as manufactures says storage can expand only to 1 tb but in ssd 1 slot i have 500gb, will it ready my new 1tb or will it become 1.5 tb?
@mostafaamr3202 12 күн бұрын
same issue
@petercourtney1405 4 ай бұрын
Hi Patryk, I have 4 x Sapphire Nitro R9 390 8mb cards I would like to post to you, happy to send to you for free of course, all the best Peter
@DIYRepairHour 4 ай бұрын
Hi, are those a non-working ones? :) Hit me at [email protected] please Thank you! :)
@BucifalulR 4 ай бұрын
What happened, though? What GPU were you experimenting on?
@DIYRepairHour 4 ай бұрын
It was either 2060 or 1070ti core, can't remember. It was possibly a shorted one, and as to what happened... the tool that was holding it lost the vacuum.
@BucifalulR 4 ай бұрын
@@DIYRepairHour You're not using the NF.Sucker, I see, hehe..
@DIYRepairHour 4 ай бұрын
@@BucifalulR yeah now I have something better:)
@andrew_koala2974 4 ай бұрын
STOP the music when you are speaking.
@DIYRepairHour 4 ай бұрын
Yeah sorry about that. It was muted on the timeline, but it reappeared after the export to MOV file...
@markusweissenbock6337 4 ай бұрын
Use a knife tip for your soldering iron. Will give you much better results.
@DIYRepairHour 4 ай бұрын
I do have all the possible tips, the thing is those are for my old soldering iron which is not great for precision work, it uses T900. I yet to buy more Type-210 / Type-245 ones, those are on the expensive side :(
@Junior_POA 4 ай бұрын
Not the same! Congratulations!
@HomesyncVos 4 ай бұрын
Amazing result! Great job.
@frazerxavier7295 4 ай бұрын
good amount of work put in. nice job
@hombreimbisible3504 4 ай бұрын
That's a lot of hard work. I'm not going to lie, for some reason I also like to do that kind of work sometimes. which economically do not make any sense but for personal satisfaction and to know how to do it just in case. Or maybe something is broken in my brain. But it doesn't seem like the 5000 series is going to be cheaper. And in case you have a 4090 with a similar problem, it is starting to make sense.
@Dandan-tg6tj 4 ай бұрын
A lot of work. I had a card used on a beach. It was corroded everywhere and I was an idiot for accepting to fix it. The worst repair in my entire life. Anyway, congratulations for your hard work.
@DIYRepairHour 4 ай бұрын
Thanks, it was a lot of work yes... but that was the idea. It was for my own satisfaction, saving a really really nice card. I just love this particular MSI one. Still rocks if you are not into the entire RTX thing.
@Dandan-tg6tj 4 ай бұрын
@@DIYRepairHour I play Fortnite and Dragon Mania Legends. There is no way I need anything more powerful than a 1080 in my computer. It isn't even a "Ti" one but it does its job great. It's a repaired one and it is working just fine. I also repaired this one for my own satisfaction and for my own use.. that until a kid needs a video card and I have nothing else to give 😂
@DIYRepairHour 4 ай бұрын
@@Dandan-tg6tj yeah I played fallout 76 lately, and having 1070 ti in my system. It maxed the frame rate. Unfortunately it died again as it is heavily corroded. But it will be in a video soon as a core donor.
@Dandan-tg6tj 4 ай бұрын
@@DIYRepairHour Good luck!
@RepostedCentral 5 ай бұрын
the pins for my ssd connector broke and HP is trying to say i will need a new board. but can it be replaced with a new connector by soldering and save me the $400?
@DIYRepairHour 5 ай бұрын
Yes, easily. Don't spend that kind of money just because the connector is broken. New connector (or even a used one) plus the labour would be less than £50.
@RepostedCentral 5 ай бұрын
thank you much! glad i found you!
@RepostedCentral 5 ай бұрын
@@DIYRepairHour does any m.2 connector work? got one that looks to be a match, 4 pins on the end and several on the other
@DIYRepairHour 5 ай бұрын
@@RepostedCentral you need to source a connector that points the same direction. Because you can have left or right facing ones, and those are not interchangeable.
@burmixmixa 5 ай бұрын
Hello! How to turn this monitor on???
@DIYRepairHour 5 ай бұрын
It has a touch panel on the front bezel, right bottom corner. When the decals are worn it's really a "poking in random places" game to turn it on.
@burmixmixa 5 ай бұрын
@@DIYRepairHour Do you mean I need touch the finger to the bottom which is in right corner, right? I touched but the monitor did not on(
@DIYRepairHour 5 ай бұрын
@@burmixmixa assuming your monitor is working... try and find a picture of a new one on the net to see where the power button is. The area that will respond to the touch is not very large.
@burmixmixa 5 ай бұрын
@@DIYRepairHour I touched finger to the small bottom but the monitor did not termed on(((
@DIYRepairHour 5 ай бұрын
@@burmixmixa you think it's broken?
@Sydney268 5 ай бұрын
Less solder to clean off now😂
@user-mh5nj7ub5d 5 ай бұрын
Пиздец, ты выпаеваешь чип, вопрос знатокам , " нахера столько мультиметров и зачем они нужны " 😂😂😂😂и все
@caydenvandusen7464 5 ай бұрын
I wish i had a heat gun my 400 dollar gaming laptop needs a reflow because it shuts off when i press on it
@user-mh5nj7ub5d 5 ай бұрын
Чувак не нажимай на него, и все будет ок
@nomansddiqui9962 5 ай бұрын
Bro was performing an open heart surgery
@blackhorserepairs 5 ай бұрын
Sorry you lost the 4 hour recording, I know how that feels. Great work man! so you're back on GPUs full time now? :D
@DIYRepairHour 5 ай бұрын
I am repairing stuff all the time, the trouble is I have no time for video editing lately :( Tried to convince my wife to learn editing but to no avail ;)
@icewallowcome_daily9802 5 ай бұрын
What if the laptop only has 1 SSD but there's also a slot for SSD 2 without a connector, can you add another connector to the motherboard on the SSD2?
@DIYRepairHour 5 ай бұрын
Well that would depend on the rest of the circuitry. Is this just wired 1:1 to the other slot for alternative chassis configuration or is it a completely electronically independent PCIE bus? Will BIOS make use of it? Hard to tell. Nothing stops you from trying I guess:)
@viktorhamsik Ай бұрын
I think I will let you know. Gonna try to do that with Acer Spin 1
@zxcv6854 6 ай бұрын
hey man we have the same gpu. can you help me whenever i play too much my monitor turns to black screen and my gpu fans starts to revving up 100%
@hombreimbisible3504 6 ай бұрын
Good repair. Personally, I would prefer to hide that cable a little more. But it is only for aesthetics. I think you are correct in putting that card in a riser vertically. It is a very heavy card. I have one exactly the same with a broken pcb and this special board has a tangle of connections in that part in several layers of the pcb. Very difficult to repair. It even pads under the graphics chip and memories. Because the previous owner decided to connect it directly to the motherboard without holding it with anything. It was a very fun repair LOL
@DIYRepairHour 6 ай бұрын
I know what you mean, I do have a black PCB mask, and I could hide the wire better now that the card was working fine for a while, running the latest games for over a week. But this was filmed as I go, so I wanted to make sure nothing else was affected in the area, like the display ports. Now that it is fully tested I'm tempted to hide it.
@philipwest5198 6 ай бұрын
Excellent work!
@lshon8089 6 ай бұрын
Nice job. Thanks for sharing bro !!!
@DIYRepairHour 6 ай бұрын
Thank you :)
@sylwesterirla9246 7 ай бұрын
thank you