@@robertpeters9317 thank you for viewing and commenting. The led are "non" serviceable, although repairs can be made depending on how good you are with a soldering iron. Otherwise its replace unit

@@karismith7280 thank you for viewing and commenting

@@La.aviator thank you for viewing and commenting.

@@Mr39thWays thank you for viewing and commenting.

@@Andrew2004 the factory bulb is 7506, the ones I put in are 1156. It's what I had for replacement, plus I like the look. Hope I was helpful, good luck.

@@Andrew2004 thank you for viewing and commenting. The actual bulb size for my year model is 7506, the silver star ones I'm using are 1156

@@niteshift2715 thank you for viewing and commenting. The bulbs on this vehicle do both high and low beam. If bulbs have been replaced then start checking your connectors and fuses.

@@ReaksOP thank you for viewing and commenting. That would be a good question for the versa forum site. I don't know these newer radios just yet, I apologize.

Did you ever find the answer to your question? I’m currently trying to replace mine with CarPlay.

​@@helloworld8508 What did you buy?

Update: So I have a 2021 Nissan Versa and ended up replacing the head unit with one that comes with CarPlay. I did find an issue with doing that. My backup camera doesn’t work anymore because the grey slot in the back is different. It’s also isn’t connected to my steering wheel anymore, so I have to reach over to turn my volume up and down and I have to turn the radio on when I crank up the car. Edit: I’m not a car person, but I’m going to figure out how to set it up to where I could get my back up camera function back. I’ll come back with an update when I figure it out.

@helloworld8508 thank you so much for your input. It was a good question that deserves an answer, This is how we figure things out.

@@fpsRussiaviewer thank you for viewing and commenting.

@@Djack0220 thank you for viewing and commenting.

@@iam_tiffany1975 thank you for viewing and commenting. I just got my hands on another one so I may have a chance to video something more in depth.

@@coolbreezedude3451 thank you for viewing and commenting. I appreciate your input, hopefully the unskilled can benefit from it. I can get in and out of most cars with minimal effort. Stay tuned, I just received another one to work on so I may redo these bulb videos and a couple more.

@@darkizofficial good work my friend

@@darkizofficial thank you for viewing and commenting. I just made a purchase of a couple more euros, should be dropping new stuff soon

@@darkizofficial highway killer, lol

@@failmarques0968 the reverse lighting should be on both taillights for this year model. Thank you for viewing and commenting

@@FrankBruce thank you for viewing and commenting

@@rglazz thank you for viewing and commenting. I also have a love hate relationship with this brand

@@williamstevenson8518 thank you for viewing and commenting. I'm unsure of installing an aftermarket device in these vehicles, but I am sure that there are devices that can help you keep most if not all of your factory functions. Try checking on the crutchfield website, they carry most of what you need for car audio.

Thank you for viewing and commenting. Some parts from the Nissan or Infiniti dealer will come painted. You can ask if its painted when ordering. The price was a little under 200dollars, cant remember exactly how much.

Thank you for viewing and commenting.

Thank you for viewing and commenting. Its been a while since I posted these, kind of forgot that I filmed both sides. Glad it was helpful.

Thank you for viewing and commenting. All bulbs should be accessible after removing housing from vehicle. It may not have wires going to it but a knob you can turn, if still not visible it may be an L.E.D model and would require replacing the whole assembly.

I figured it out... Just remove the three 10mm nuts and remove housing.. Bulb was easy to find that way. Thanks

@@nanofamous that's good to hear. I haven't worked on one in a bit so was hard to remember the setup, good work! I should start getting some in through the rental company as it gets warmer, fingers crossed.

Pull on light switch

Thank you for viewing and commenting. It's a shame to see we can barely make our vehicles our own.

You can swap for a sv or sr radio if you have a versa s base model if you want apple car play

They did mention maybe back up camera won’t work!

@@williamgaribaldi2124 thank you for viewing and commenting. I suppose I got real lucky with this one, the radio I got was removed from an sr into a lower trim with no issues. I've seen the vehicle several times for small scratch repair and the radio still works well. There was a thought of some type reprogram while installing, luckily I didn't.

Thank you for viewing and commenting. I apologize, but no. I got lucky with the one I got. There should be a menu that displays that information. If not, remove your radio and check the sticker, there should be some info. On there. Again, I apologize for not being more helpful.

Thank you for viewing and commenting. There could be several reasons they don't work. Check fuses, make sure bulbs and carrier are seated properly. There are wires within the housing that can become brittle and break away from housing. There are other things to go through but hard for me to diagnose without actually touching vehicle. Like checking that there's power going to the bulb's. I wish I could be more helpful.

@@ScarzCarz thx for the fast reply. I couldn't see any broken wires. But I'll check tomorrow if there is any voltage to the bulb . Thx again.

Thank you for viewing and commenting. I'm happy it was helpful.

Thank you for viewing and commenting. My light came on because I ran it with open vacuum, it cleared after I drove it around a bit with a couple key cycles.

You can purchase a full kit that have all the bits labeled, Phillips #2 bit size. I'm not exactly tech savvy enough to post links. Lol

Thank you for viewing and commenting. It's all "Philips" from what I remember, I'm just using a ratchet type.

@@ScarzCarzanyway you can give me like an amazon link? for the screw driver i’m not very familiar with the brands i’m taking my radio out in a few days and this will help so much lol

​@@anthonyF117take it to a shop. You're trippin

Thank you for viewing and commenting. Yes, once the LED starts behaving funny I recommend replacing. Before you do, inspect the housing. There could be a poor connection or a repairable failure, as in broken wire. Housing as in the red part, if you notice the way the wires run they go to these little round leads. Make sure the plastic holding leads is not split or broken away.

Thank you for viewing and commenting. There shouldn't be a modification if both vehicles are equipped similarly. From what I can remember I removed the radio from a better equipped version, meaning better wheels and appearance to a not so equipped. As long as everything plugs in it should work fine. But at the same time not exactly sure, I thought I would have to reprogram after swapping but so. I would try getting on a Nissan versa forum and see if anyone else has tried what you need.

Thank you for viewing and commenting. There should be little holes in front of headlight, one for up and down one for left to right. The holes should be on black cover, unless they designed it to be done from behind also.

Let me correct the adjustment part of it. The adjustment holes could be at bottom of bumper, you could see holes with arrows around them indicating adjustment direction. I say could because I haven't worked on one in a while, but vaguely remember maybe seeing holes and arrows on bottom of bumper. I filmed a bumper removal I never posted so I'll review it.

Thank you for viewing and commenting. I'm aware that I didn't show everything I should have, been trying to get my hands on another for a better video. It's a simple job once you do it once. Remove plug, remove rubber surround using tab or tabs, push and pull away retaining spring holding bulb in place. Installation is reverse order.

Thank you for viewing and commenting. I've been driving Audi since the 90s, cant run anything else. LOL. KZbin doesn't always work well with the small channels but I do have a likes video.

Thank you for viewing and commenting. I'm trying to get my hands on another for a more extensive video, I apologize for not making a more complete video. I'm always in a hurry and a couple hundred things on my plate at the same time, I tend to forget or miss things. Again, I thank you for viewing and commenting.

Thank you for viewing and commenting. I appreciate your input. I haven't had issues in the last 20+ years, guess I'm lucky. When not in a hurry and paying attention I do the "correct" way.

Thank you for viewing and commenting. Sorry for your pain. It should just be a half turn and an audible click, try using angled needle nose to save yourself from more pain and aggravation

Thank you for viewing and commenting again. There should be a video on the other side as well, KZbin algorithm doesn't like us small channels. Lol

Thank you for viewing and commenting. The amps should be on the sticker on top of current battery, if no sticker have the people at the part store look up the proper size battery for your vehicle

@@ScarzCarz Thanks

Thank you for viewing and commenting. The rubber cover is reusable as long as you didn't rip them. Once the harness and cover are removed the bulb will be held in by a spring clip, there should be a looped end on the clip to help flip away from the housing. Either both ends of clip are looped, if so squeeze them towards base of bulb and it should release. If only one end is looped then slightly push forward and away for bulb. I apologize for not making a more in depth video, I'm trying to get my hands on another one to re shoot more in depth. Good luck my friend