Thanks

why the hell would anyone spray olive oil or pam on their fridge bro? maybe some dumb fuck that watched some other dumb fucks youtubde video. lol. and you probably should "the best way for you to clean your fridge" cause that is NOT NOT NOT how to clean or shine stainless steel and certainly NOT the best way..

I'm shocked they make the tube too long, considering how most companies shortchange consumers on material like that to save money.

Thanks so much

Thank you

Thank you… really helpful

Just swapoed everything like you and the darn thing is having this issue. The setup has a clip that keeps the end of the tube nearly 3/4" above the overfill tube so this trick isn't helping in this case. This toilet has been such a pain for so long.

Thank you, I just wanted to let you know that I used the information here to fix my connection issue. It just happened today and it was working yesterday. I don’t know what caused it though.

There's one thing that you didn't do. You have to clean the underside of that rubber seal. That's where the gunk builds up.

This is brilliant! Thank you

Thanks you're helping me 9 years later

Thank you! I took one look at the wires all over the place and thought I wouldn't be able to change the battery by myself 🤦‍♀️

I never comment - but I have to say: THANK YOU. It was metal collar savers for me. Six of them. This has been an on and off problem for months. Very grateful.

Why did you put it on with the bracket now upside down?

I replaced the potentiometer with a new one. It worked, but then the next day, it didn't work. I recommend these steps when installing the potentiometer. 1) Before attaching the wires, clean the old connections on the circuit board. I used a Dremel with a small wire brush to polish the connectors. I then sprayed some contact cleaner on them. 2) I noticed the connectors on the new potentiometer did not attach snugly. I used needle nose pliers to gently squeeze them down a bit. When installed, they were snug. 3) When screwing down the nut on the potentiometer, apply just a little pressure by hand. Be careful not to deform the potentiometer case. After taking these steps, it then worked fine. I also replaced socket (even though mine was not broken_. It does seem quieter. I may end up taking it apart to replace the bearing near the top of the motor. I have found the grease in the bearings tends to dry out over the years. This may make it quieter.

A damn nail was stuck! Thank you for the great video saved me a major headache was about to go buy a new washer since I’m deploying and didn’t want to leave the family without a washer

Does not work

Good for what it is, but the title is misleading. This doesn't show you how to fix a loose door latch. It shows you how to fix a loose strike plate, which is a different thing. BTW, my preferred fix for loose screw holes in wood is to drill a 1/4" hole through the old screw hole, cut a short piece of dowel from a dollar store craft aisle, put some carpenters glue on it and push it into the hole. Let the glue dry and you're now starting with new wood, and it works like a charm.

This is the absolute worst advice I've ever heard. All you did was spray the product off the window onto the ground. It did not even have time to haze over. Read the directions on the bottle next time.

This is a simple method for you. But my bracket also holds the cable END itself.. the cable is a little loose when the door is all the way up, but I don't know if it's loose enough to wear if I take that bracket off it's not gonna snap and go somewhere where I'm gonna have a real problem putting it all back together. Do you have a solution for this type of bracket?

My 14 dosent have a key ,,it push button start

Hello my friend, cheers from Argentina, i have the same color of your Bronco, I installed the same hood deflector, but I have an issue there when i drive up to 75mph - 80mph the hood start to shakes .. i don't know if you experienced the same issue ... but did you resolve it ?

Great video! Had to change the battery on my 2021 Bronco sport and this made it so easy.

i ended up ripping it out without taking the air box out and when replacing used a flat head on one of the tabs leveraging it on so it jus pops right in,, took like 40 min DO NOT RECCOMEND 😹

Had this exact problem with one of our bathrooms. My water bill was close to $300 (which is included withe sewer and trash) every month for about a year due to this constant refilling. After watching this video, I adjusted the height of the filler tube and NO MORE PROBLEM!!! I received my latest bill and it went down over $150!! Thank you THANK YOU THANK YOU!!! Couldn't believe what an easy fix this was!!!

I would like to meet the person who decided to make a battery replacement into a 50 parts brake down used to be disconnect negative then positive and life up you gotta take off the intake for a easy battery replacement that’s crazy

Happy to be your 1,000th like! Appreciate your tip! Worked great!

I would have thought that the inputs would be at line level and you would need to convert speaker to line level input to match the requirements of the transmitter. Not doing this could overdrive the unit and damage it not to mention the sound is horrible.

Some of them the cable is attached to the bracket. That is why they prefer to bend the track to get the roller out, then pound it back.

Thank you so very much. Our appliance warranty service was going to be a week to come you explained it so calmly and simply, I felt capable of giving it a shot. I am a creative person and other than determination have no machine solving experience. I fixed it had almost exact metal paper lip in pump. Save me $150.00 my hero jan

It probably wouldn't be a bad idea to disconnect the power first, just in case.

What if you live in a mobile home home and have plastic pipes? My handyman friend said the bleach will destroy the pipes. Is that true?

What if you live in a mobile home home and have plastic pipes? My handyman friend said the bleach will destroy the pipes. Is that true?

El mejor video rápido y sencillo👍🏻👍🏻👍🏻👍🏻

It took a bit but it worked for my 2016

This was the best video I found for changing the back breaks. I tried really hard with a C clamp to open up the caliper, but I couldn't get it to budge. Everyone's videos just show them slipping the shoe on and it with ease. Yours was the only one with all the details I needed, right down to the metal prong on the new pads. Blessing from Boise, Idaho.

Horrible

Is there a reason to use nails instead of screws

some overhead doors have the nuts to the bracket/ roller under the roller. that is why they have to bend the track. you were just lucky enough that your nuts were out of the way of the roller pin.

Pa tag renewal

Pa registration renew to do online

Hey, appreciate it bud. Good going!

wow, so accurate, .... but because we cannot zoom enough , I'm always suspicious , because google maps always give me high number than i thought. anyway thanks for the video.

Thanks you!!!

Spoke with an automotive engineer years ago and asked why they made it so difficult to replace certain items. His reply "we make to put together not to take apart"

I purchased the part from your link and changed it out successfully but the low speed still doesn’t work. Do you have any other ideas as to what I should do?

What's next? How to add gas? 😂

Mine looks great

Extremely well explained, thank you for your time!

Thank you! And, by the way, you are pretty good at video-editing, as well. All those arrows and graphics. 🙂