Can i have the iso that ur using? There is no Status folder in regedit

this video is really nice it work guysss🎉🎉🎉🎉🎉❤❤❤❤❤❤

Got the 10980xe version, with EVGA dark. Having a mix of 46, and 48X with great runs in R23, and even 3Dmark. But if i use all core 48X, i notice that in blender, after a few runs, system would hard reset, is this normal for heavy avx workloads? but with mix of Core ratio, its solid on a AIO 420. at 1.27 on 48X and 1.2 on 46X. vccio at 1.150, and 3800 mem with tight sub timings. Would like all core same, but what can be done to prevent bsod or hard reset? under avx loads? and AVX is 5, and 8 offsets

Thanks Luumi, my EVGA Z690 was not taking a BIOS at all. I watched your video and have just finished re-programming all three BIOS. They now work. Now I am having a problem with the motherboard recognizing my SSD hard drives. I had this problem before and will try to re-figure it out.

Thanks!

Hola, alguien ha logrado hacer funcionar esto en una Asus Prime Z270A con un 9900 o 9900K?

Wax and grease remover is good... how did you clean the epoxy with 99.9% isopropyl?

Will this work on a modern gaming laptop? I have a Cyberpowerpc tracer v laptop with a password lock. Thanks

Luumi, I have a evga z370 micro. Im having hard time getting it to 5ghz or 5.2ghz. My cpu frequency keeps fluctuating 4.7-4.8ghz. Im scared to raise the voltage on it past 1.35v. Qlso prime95 makes my cpu hit 99celsius

Do you still think Kingpin KPx thermal paste is the best?

Awesome video! an Intel dp55 board paired with an i5-750 was my first DIY pc project.

Thanks alot

Thank you for this guide

thank you so helpfully

Yo thanks

Thank you so much!

It could be also that the real benefit would be noticed only after some time. I mean, without washers, it could take some time for the CPU to get really bent and give noticeably worse temperatures than with the washers.

Thank you bro! You're a lifesaver! I appreciate you also writing the command prompts in the comments as well.😊

the spread at motherboard level is crazy. my work mate and i got the same hardware but entirely different oc results. its just the way it is, sometimes :D awesome result anyways! great job!

My gigabyte board did the same it would turn on but I either got no display or the PC would freeze. But removing the cmos battery its working fine since.

Can I do the same for 9600k?

I dont know but when i try to do the code even to put the modded intel but i still get that code 10 error when putting the modded 25.2 folder.

Oh god thanksyou. You halp my pc

Does this board work on 2000 ?

this is def the PSU for people wanting to make ultimate windows 7 PC's. You could easily run this with the i9-9980XE, 2 RTX 3090 Ti's in SLI, and 128GB of RAM without it breaking a sweat, which allows you for some great overclocking and maximizing of the Windows 7 OS. Until SLI comes back for GeForce cards I dont see a point for PSUs over 1600W.

he stops talking and starts doing it at 3.57

I JUST picked up one of these secondhand as a trade. I'm thankful I got both the GPU and the same price of it in cash for an old 570 that I didn't need.

Thank you!!!

That second command prompted the error "The parameter is incorrect (0x80070057)".

what about gd-2? Is it better?

I keep coming back to this CPU for being the best HEDT CPU that actually has more than 21 or 24 lanes (44), fast single core performance, and more than 16 cores without costing an arm, and a leg. It's crazy that this CPU is still relevant.

What if that doesn't work? 😔

...was that an LN2 testboard?

i got a set of bykski heatspreaders for some ddr3L ram with kriticalpads 0.75mm thermal pads. bit overkill for such lower powered ram, but so far have been working well in my little optiplex server

Why I can't do : \ in keyboard

My GD900 syringe sometimes needs to drop excess liquid before applying.

Conductonaut breaks high quality nickel plating. 8auer is silent about that.

i have this cpu i5 740 i can play valorant

Another PC saved here, thanks a lot bro!

Supercool direct die cooler way to go !!!! I also used rocket cool delid tool and used their instructions in the video Heat the ihs for 2 minutes with a heat gun before delid makes it easier. Also goo gone pen for glue on ihs

Where did u get this brand new😂

U dont do ddr5 overclocking guides anymore?

này làm theo trên main z97x-ud5h cũng được đúng không ạ

hey can you test avx512 and non avx512 with ps3 emulator_

Tarmo Tinneri contains: acetone, ethyl acetate. Google "käyttöturvatiedote tarmo tinneri"

Hi bro, i have an i9 9900kf but my mobo (it was z390) fried... Ive got a asus prime z370-p that i have fitted and it is all working, but my cpu is running at 4.3 only lol Any idea if i can OC it further? Really appeciate the help ❤

5:36 oh shit irql-not-less-or-equal bsod can mean ram instability? O_O

Dear sir. I have to flash a W25Q32BV chip, that operates at 3.3V. If i buy the CH341B version, will it be safe for this chip? no mods to the programmer are recommendable? Thanks, i have no soldering skills.

For blown USB voltage lines i always use 1.5A fuse wire, alternatively you can bridge from the 5v line of the ATX connector

holy $hit 1.98 vCore? damn that silicone gonna degrade like crazy lol!