Aside from the nice hinge design, being fairly new to Fusion, the tips you casually dropped during construction were the best part of this video. Thank you!
@edwinmartinez28514 күн бұрын
I was having a pain in the ass trying to create simple star … thanks for the video very helpful
@kozmaz874 күн бұрын
LOL sacrificing USB ports is such an Apple user problem :D My computer has 10 USB ports on it and further 10 in various hubs connected to it including the monitor :D Also my laptop has many USB ports because it is a Lenovo yay :D Other than that it is great video thanks for the tips.
@drstrip1004 күн бұрын
When I create a new sketch by selecting the extruded face, the sketch is locked. I've tried multiple times, same result.
@drstrip1004 күн бұрын
The new sketch shows a small lock icon, which means fully constrained. But it doesn't mean the sketch can't be edited. Just start adding stuff and the lock icon disappears.
@queenidog18 күн бұрын
Great video, well explained, excellent quality photography, clear and concise, no irritating music in the background. I'm printing with my Bambu right now. Instructions are really lacking in the "Quick Start" manual.
@ruthlessluder16 күн бұрын
Does this work well with free orbit as well as constrained orbit? With my regular mouse, navigating around free orbit is quite a mess.
@ruthlessluder18 күн бұрын
I think if you made that front lip taller, then the gear wouldn't be able to slip out.
@baili865420 күн бұрын
Every word speak by you is very useful, in other words, no one word waste time, Very thank you !
@MightyGimp22 күн бұрын
Is there a way to remove like this, but with an offset so the area removed is larger than the tool being used to do the removal? I want to make parts that join together using lugs that push into slots. I can create the slots using this technique so the lugs are a tool cutting out the area that becomes the slot, but I need the slot slightly bigger than the lug or the fit is too tight.
@hetszunyukoponyanyimonyok1061Ай бұрын
I'm an occasional user of F360 but having the Spacemouse Compact (the simple wired version). I was always suffering with the keyboard/mouse combo but the Spacemouse. It is very intuitive. Easy to use and to carry. It was superb investment.
@johngreig2824Ай бұрын
It's powerful software, for people who know how to use it. I am just starting to learn but I am amazed at what can be done with it.
@maicorivero9524Ай бұрын
Music?
@The_king3493Ай бұрын
how do you simulate things in fusion???
@jeffmorrison9905Ай бұрын
Can you then increase the triagles before printing.
@AXMPaperModelsTutorialsandMoreАй бұрын
Hi, I just came across with your channel and immediately subscribed. When I create an svg in Illustrator, I scale it to 133.33 % . Yup, that’s the magic number. Then I insert the svg into Fusion 360 and you’ll have an exact measurement as Illustrator.
@Blackspire_CosplayАй бұрын
thank you for the video this was very informative. one question i did have and this might be silly or better know to the 360 community but how did you get the graphing lines to disappear and reappear as you need them?
@christyler1647Ай бұрын
Oh! Thank you!
@gyorgybalassyАй бұрын
Great video, thanks for sharing! This tool is even more useful when the revolve axis is not centered. Adding tolerance between the two bodies is another interesting scenario.
@lightman500Ай бұрын
Thanks for such a great tutorial....just what I needed to get started on sculpting....Kudos!
@christhompson6937Ай бұрын
This was great. Solved my issues with doing a diagonal hole in a cylinder. Thanks!
@CraigHollabaughАй бұрын
Thanks
@the_runofffАй бұрын
Awesome vid, I've had my bambu p1s for a few weeks and didn't know about "By Object" printing, nor auto place or auto orient!
@garagemonkeysanАй бұрын
Nice video. Mahalo for sharing! : )
@h4z4rd42Ай бұрын
That small detail you've mentioned at the end is crucial, as revolving a sketch placed on the X-Z plane and revolving an object around the Z axis which has parts offset from the X-Z plane obviously won't give the same result. Thank you for your efforts.
@davidkempton2894Ай бұрын
Thanks very much for taking the time to show us this. 🙌👍
@DesktopMakesАй бұрын
You're welcome!
@stephengittins6116Ай бұрын
Great video. 🙂
@DesktopMakesАй бұрын
Thanks Stephen!
@miketkappАй бұрын
Great explanation!!!!
@DesktopMakesАй бұрын
Thanks Mike!
@billstrahan4791Ай бұрын
I don't think the revolved body from the sketch actually creates the same shape. The distance of the furthest edges of your key is a diagonal distance created from the original extrude, so the swept diameter of that extruded body will be a larger diameter than the diameter of the original sketch. the point remains that it is a pain to do all that and the new feature is a great thing, I just wanted to point out the results are not identical in this case. The revolved sketch approach doesnt' create a body that is equivalent to rotating the body. I see now (after watching the rest) that you noticed it creates a different profile for the reasons I stated, but I do think it's important to realize that the two approaches have different outcomes.
@DesktopMakesАй бұрын
Hi Bill, take a look at 10:14 where I talk about this. Notice that the projected sketch goes wider than the edge of the model to account for the rotation.
@billstrahan4791Ай бұрын
@@DesktopMakes Yep, that's what I was referring to when I said that you mention it later in the video. I had replied before I got to that point, so went back and edited my comment.
@tgs1766Ай бұрын
As a general rule, it’s probably best to watch the entire video before leaving a comment.
@billstrahan4791Ай бұрын
@@tgs1766 Man, I totally agree. I don't think it was totally clear that the two methods deliver different results, which was what I pointed out. I know the larger profile is pointed out later in the video, but it isn't totally clear at that point this means the first method produces a different results. Regardless, I subscribe to the channel and enjoy the content. My aim wasn't to nitpick, it was more to make sure that someone who didn't follow very closely understood that they were different outcomes.
@RandomSmithАй бұрын
@@tgs1766 agreed, but the two methods do not yield the same shape, unless with hindsight (10:25), he could have gone back and would have had to take the center line to the outer corners of each of the 3 horizontal blocks plus one from the centre to the corner of the centre column (pythagoras, so not immediately obvious to everyone) which is a fair amount of work that this tool solves.
@gorgonbertАй бұрын
Thanks 🙏
@lindseyjohnson1130Ай бұрын
Thanks for the video and explanation. When creating your key, why the multiple sketches? I like short timelines. I get it if they were complex step. Just my two cents.
@DesktopMakesАй бұрын
They key was made with only two sketches. The second sketch was needed because it was on a different plane. The only way to keep them on the same sketch would be to enable 3D sketching.
@DesktopMakesАй бұрын
Gave this another thought and I could have created the entire key in one sketch. The second extrusion would simply be from the center plane instead of the front face of the key.
@lindseyjohnson1130Ай бұрын
Thanks for the reply. I continue to challenge myself in keeping my timeline as short as possible.
@jackboote5179Ай бұрын
I have an updated version of this Fusion parametric if you would like it. f3d file.
@Chris0612Ай бұрын
I cant extrude the text, done exactly what you did and fusion tells me "cant finish the extrusion". You have an idea what the issue is?
@tbonepsb2 ай бұрын
that was driving me BANANAS!!! TY SIR!
@CopycatStudiosLA2 ай бұрын
fantastic video - thank you!
@joshmanning22462 ай бұрын
i needed my holes to be 45 degrees from perpendicular. I had to create one solid piece to represent the hole and create a 360 degree circular pattern from it. Then individually offset each body to create a full 360 degree loop of parts in the helix pattern and then i could create rectangular pattern to form the full helix all the way up the body of the tube. I could then select all, including the body i wanted to keep, make a selection set, then make a copy of the part i wanted to keep, before deleting the original body. That way i can use the selection set instead of highlighting over 300 bodies to remove when i come to combine components
@jaimade12 ай бұрын
How do you print just the infill
@jaimade12 ай бұрын
Thanks to your other video, I figured it out.
@laurac94402 ай бұрын
imposible hacer la extrucción al objeto para que queden las curvas de las bisagras minuto 11:11 YA LO SOLUCIONÉ
@nullbeyondo2 ай бұрын
The moving and centring part was especially my problem for trying to position an imported svg sketch into a model to extrude probably. What I had to do previously is "manually" move it, which made me very frustrated cause it wasn't symmetrical the more you zoom and caused me a terrible OCD... but no more, I now know how to center by a point and I love you for all the tips you've shown. Thank you!
@yigawaffle2 ай бұрын
Hi! When I am extruding the pin, I get one combined body, instead of two seperate bodies like you get. Any idea why?
@DesktopMakes2 ай бұрын
Make sure to choose "New Body" in the dialog box instead of "Join" under "Operation".
@yigawaffle2 ай бұрын
@@DesktopMakes I am. I found a workaround, but it seemed strange that this wasn't working. I have had some other similar issues with fusion in the past, so I might reinstall it later.
@3DAstroTC2 ай бұрын
Fantastic!
@justynea71712 ай бұрын
This video is enough to convince me to get fusion 360!
@jakubkuba68592 ай бұрын
Cool. Can I also do bevel gear?
@gselzbrot2 ай бұрын
that´s really not intuitive... thank you for explaining it
@TheDudesRug2 ай бұрын
@5:30 why paste new instead of just paste? doesn't that make the new components unique?
@91icebox2 ай бұрын
Can I use the 3D SpaceMouse as a regular 2D mouse (left and right click + drag a drop windows and so on? I have mobility problems so dragging a regular mouse gets a little complicated. Use the 3d SpaceMouse as a joystick pointer with the same functions a regular mouse would be great.
@miteruno2 ай бұрын
This doesn’t help at all
@benlefler63042 ай бұрын
יאאווו ישראלים
@roberthiggins58632 ай бұрын
Just so you you know. You left out a few things (Autodesk Fusion Personal (Not for Commercial Use)) has limitations. One big one is the the files it can export (dwg, igs, iges, and sat) are no longer allowed for those of us that paid $2500 for the AutoCad program this was a punch in the gut.
@captainparabola602 ай бұрын
Велике дякую за відео)
@4pelan3 ай бұрын
I must apologize for not commenting sooner. I've used this video as a reference many times. Thanks for taking the time to introduce me to a number of features. Today's adventure was a square solar peg. The only difference was adding a square to the second sketch to make the top and middle sections.