026 - Replacing a starter on a 2012 Polaris Ranger 500 UTV 4x4 Side by Side

[@tomflynn5826]

I watched your video before pulling starter, it was very helpful. I would add one thing, the bottom 8 mm bolt does not come out all the way, you have to twist the starter up to remove the bolt (also it does help to pry the starter out a little bit so it will twist easier) and then there's room to pull the starter out.

[@DuckRiverHomestead]

Thanks! That bottom bolt was quite a pain right?

[@billyp1239]

I was hoping he would show how he was able to put the bottom bolt back in. It's a hard job to get it started. Thanks for the video.

[@DuckRiverHomestead]

It was really hard to film this. By the way, the starter has held up well since I replaced it a couple years ago.

[@reggiefausett3318]

Replace stator on 2011 Polaris 400 ranger side byside

[@DuckRiverHomestead]

I plan on replacing the stator shortly.

[@garymetts8357]

You should disconnect the negative cable not the positive the positive can Arc as long as a negative still hooked up

[@DuckRiverHomestead]

That's absolutely correct. Always disconnect the negative cable first.

[@steveyoung5228]

What was the part # for the 2012 starter?

[@DuckRiverHomestead]

Here's a link:www.amazon.com/gp/product/B00OI0RGGO/ I don't remember the part number.

[@HippocratesGarden]

Any left over "spare" parts?

[@DuckRiverHomestead]

Fortunately not this time. 😂😂😂

[@slovakmonkey]

Jooooo have so many... eskeells?

[@DuckRiverHomestead]

Sí

[@joemccabe830]

Oooh no he did ent... Broski pull gas tank move the 2 covers, well im doing the starter gear. 2 bolts 1 nut easy peazy...😂