07 22 21 2007 Honda VTX 1300r Coolant Change

[@francisdereimer7953]

Thanks for the video on changing the coolant on a 2006 VTX-R but I've discovered a couple of short cuts. 1) You do not need to completely remove the gas tank. Take out the frame bolt, disconnect the fuel line and vacuum line but no need to disconnect the two electrical harness'. Simply wiggle tank backwards and rest it on the frame for the entire procedure. 2) Empty the coolant reservoir by removing the hose and get it completely empty by blowing air through the filler port. 3) Refill the coolant reservoir through the same filler port. 4) To bleed the air out of the lines run the bike longer than 3-4 minutes, more like 6-8 minutes looking for the fluid in the filler neck moving, almost like a stream. That signifies the thermostat has opened and coolant is flowing through the entire system bringing unwanted air bubbles to the opening. Good luck and TAKE YOUR TIME!

[@OnTheEdgeNow]

Thank you for the tips. I didn’t discover the expansion tank filler behind the side cover till after I changed it. I really like the idea of using compressed air to blow the expansion tank out.

[@masterroshi23]

I just did it today .and no need to remove the tank at all

[@brevanbutterfield6405]

@@masterroshi23 did you just reconnect the fuel line and run the bike like normal or did you use some sort of external gas tank?

[@nathaninsley8044]

Loved the video, very helpful and explanatory, thank you! Just recently bought a 2006 Honda VTX 1300C, 17.5k miles (first bike) and want to learn how to do all the basic-to-advanced maintenance on it.

[@beastiemcgee544]

I just bought one about 5 days ago and have put 300 miles on it great bike.

[@chalupanotomatoes9609]

Every video I find something that my vtx probably used to have. Appreciate how much you show!

[@brianscanlan5198]

Great detail in this video as I am still learning to do all the jobs myself to my 2008 Honda VTX1300C so this really helps for the coolant! Keep those videos coming! Thanks again!

[@OnTheEdgeNow]

I am learning right next to you when I attempt to do these jobs. Glad they are helping you out.

[@ShujaKidwaiMasauliwala]

Awesome explanation !! You made it look so easy. I guess I am going to attempt it on my 2005 VTX1300C. Thanks a ton for taking the time.

[@OnTheEdgeNow]

Glad it helped you out. With a little maintenance these bikes will run a long time.

[@robert-wr6md]

Thanks, very helpful, along with the comments too, serves to make this job a bit easier.

[@jaimegomez989]

Great job sir! Very informative. A question; Can you just add coolant to the overflow fill neck located just behind the left side small cover???

[@OnTheEdgeNow]

Yes, that is the best place to add it. I actually just found it today when I was putting a Speedohealer on it today. Thank you for pointing that out.

[@jeffjeff4477]

Yes located the fill cap also under the side cover How much fluid goes in the overflow tank?

[@OnTheEdgeNow]

@@jeffjeff4477 There are two lines on the overflow tank but I do not know what the quantity of antifreeze it holds. I just filled it midway between the two lines.

[@jeffjeff4477]

@@OnTheEdgeNow Thank You Is the line on the rear of the tank? Or you one of the sides? I need a manual lol My Hayabusa is marked plan as day I am enjoying my vtx. 2004 dark blue with spokes white walls clear front windshield and brown Viking bags. Fun cruiser!!! Thanks again I will check out your other videos. Next is oil change

[@OnTheEdgeNow]

@@jeffjeff4477 It is on the back. You have to stick your head down by the ground to see it. I used to ride a Honda CBR 1000rr. Both are screaming fast bikes.

[@OnTheEdgeNow]

No, I used Honda HG extended life antifreeze Type 2. I bought mine as a 50/50 mix.

[@mikebivona5185]

awesome video...loved the commentary and the technical detail.

[@OnTheEdgeNow]

Glad you enjoyed it. I hope it helps you out.

[@DirtZen]

Funnels are for crybabies! That made me laugh! Really great video, thank you for taking the time to make it. Very helpful. I'm incredibly impressed by how clean your bike is! I have the same bike, same year and it's nowhere near as clean. I have work to do!

[@anthonydcosta143]

Love the detail explanations. Thanks.

[@OnTheEdgeNow]

Glad it helped you out.

[@grandparolie]

Awesome video and your explaining what’s up. 💯👍🏼

[@OnTheEdgeNow]

Glad it helped you out. I'm kind of learning as I go.

[@sashamaryful]

Do I really need to disconnect hoses and wiring to lift the tank and access the coolant cap? Thanks -- and thanks for helping me change my clutch cable last fall!

[@OnTheEdgeNow]

It seems like it might be a pain, but it gives you an opportunity to check things under the tank that might need to be serviced. It is a good time to check hoses and do a little cleaning in areas you can't usually get to. Glad to hear the videos are helping you out. I think getting to know your bike mechanically makes it more enjoyable knowing you can fix something when it breaks.

[@snorkellingschool]

It would have been nice if there was a detailed explanation of how to connect the external gas tank. Do you have any intention of making a video about the external gas tank connection?

[@OnTheEdgeNow]

I have had a few questions about the external gas tank I use, so I will make a short video when the weather gets a little better.

[@parishm]

is it recommended to drain the coolant, then fill with distilled water and run til the tstat opens then drain and fill with coolant ?

[@OnTheEdgeNow]

You certainly could do it that way.

[@raygedert6570]

Great video. I didn't see your external gas tank setup. Can you share it and how to make or buy one? Thanks Ray

[@OnTheEdgeNow]

If you do a search on Amizon for motorcycle axillary fuel tanks you will see a few choices. I don't use it often, but sometimes it is easier to work on a motor with the tank off.

[@shawn011274]

Isn't there a coolant reservoir fill neck behind the rear cover where the tools go?

[@OnTheEdgeNow]

Yup, found that out after I posted the video.

[@francisdereimer7953]

What about draining the old fluid from the radiator? Does that have to be done as well?

[@OnTheEdgeNow]

The drain plug I took out was a low spot in the system. One way to tell you have most of the antifreeze out is to capture it as it is draining, and measure the amount that came out. Compare that with what the manual says the coolant capacity is. If you wanted to flush the radiator I suppose you could take a hose off.

[@CJCat-o8s]

I enjoyed watching. You do some nice smooth work, Sir. ( Your bike is so clean ) What State do you live in? I am down here in Georgia.

[@OnTheEdgeNow]

I am up in Wisconsin. We don't have a long riding season up here, but we are coming into fall when the leaves change color. It makes for some pretty spectacular rides.

[@Falal_happytimes]

Thank you my man 👍

[@OnTheEdgeNow]

You are welcome.

[@michaelroy925]

Is there a thermostat in these bikes? Thank You for this video 😊👍

[@leosilvas1836]

where is the external line coming from

[@OnTheEdgeNow]

The external line you see going up into the air is from my auxiliary gas tank. A small plastic tank I can run the bike with when I have the gas tank off.

[@juliocesarfuertearredondo7513]

Necesito ayuda a mi moto le hice todo lo que abarcó el vídeo pero al colocar el tanque ya no sale gasolina. Ya le abrí a la válvula y no sale mi una gota de gasolina : c

[@OnTheEdgeNow]

Make sure you hooked up your vacuum line from the carburetor to the fuel shutoff valve. Also check to make sure the vacuum line is in good shape. (No holes or kinks.)

[@snorkellingschool]

It would have been better if you could tell me how to connect the external tank.

[@marlon45aries20]

One question, did you put car antifreeze in it?

[@migll13]

Hey, what size is that syringe?

[@OnTheEdgeNow]

It is 60cc. It is made for mixing up 2 stroke fuel. There are graduations on the syringe marking how much oil to add to the gasoline depending on the fuel mixture ratio. I believe I bought it at Fleet Farm in the automotive section.

[@migll13]

@@OnTheEdgeNow is 60cc the size of the radiator hose you were feeding the coolant through? Or is that the compassity of the serrange?

[@OnTheEdgeNow]

@@migll13 It is the capacity of the syringe.

[@migll13]

@@OnTheEdgeNow Thank you. I just for the 07 retro model about 2 weeks ago. Your videos are tons of help.

[@OnTheEdgeNow]

@@migll13 The thing I did not know about at the time is, there is a fill tube for the radiator overflow tank right behind the side cover.

[@Jcaddy]

Thanks for the info

[@OnTheEdgeNow]

You are welcome.

[@Rpm68]

You didn't mention the torque amount, but you did say it was for entertainment not informative 😂

[@terrymeche]

I sure can use that

[@ghostmost2614]

Funnels are for crybaby's Uses half a roll of paper towels 😶

[@OnTheEdgeNow]

I was hoping you wouldn't notice that.