1/350 Tirpitz (Revell + Scratch Build) Build part14

[@EbroinSong]

Part 1 LINK : kzbin.info/www/bejne/sJmZkmOQgJV4q5I Part 2 LINK : kzbin.info/www/bejne/ZqC8k4OtqNqsnqc Part 3 LINK : kzbin.info/www/bejne/gaSpo3-hYs9pipY Part 4 LINK : kzbin.info/www/bejne/o2bLgIOmepeFg9k Part 5 LINK : kzbin.info/www/bejne/nnK2eXiparCNqdk Part 6 LINK : kzbin.info/www/bejne/o5-2h3aMmNpnnrc Part 7 LINK : kzbin.info/www/bejne/m4Wzp3htjtpkf68 Part 8 LINK : kzbin.info/www/bejne/bqjEpZelnsycms0 Part 9 LINK : kzbin.info/www/bejne/pF7aiXWegalgeKc Part10 LINK : kzbin.info/www/bejne/mKPCnZytrbmgbtk Part11 LINK : kzbin.info/www/bejne/fmbIkqmee9x-oKs Part12 LINK : kzbin.info/www/bejne/j6mXkIN_nMx0hKs Part13 LINK : kzbin.info/www/bejne/iZDaZ3uqj62ZiLM Part14 LINK : kzbin.info/www/bejne/d6WXop-bfNd5bsk Part15 LINK : kzbin.info/www/bejne/hpizqmZspZt-aaM

[@michaelkovacic2608]

I no longer have any words to describe this level of art. I just hope that Tirpitz finds her place somewhere in a museum where lots of people can see her.

[@rmtrms]

I've been following this build for 2 years now and I can't describe how awesome it is, ebroin is literally the master of his craft and this Tirpitz is one one the few projects on youtube I follow for such a long time, can't wait for her to be completed but I'm also a bit sad that the journey will end soon

[@EbroinSong]

The journey is still far from the end, and we can start new journey with other big ship. =) Thank you for the comment!

[@telinoz1975]

Same here ;-)

[@SliczniakPL]

I was building my Tamiya Tirpitz together with You and benefited loads of know how thanks to the hard work You put into making Your channel. You have literally pushed me out of my "box+pe" comfort zone and into the "real" DIY modeling. For that I will be forever greatful!

[@EbroinSong]

=) I am glad my videos are helpful to you. Thank you for the comment!

[@Jesse__H]

This Tirpitz is like the Ship of Theseus! Is it _really_ still a Revell kit, after Ebroin's through with it? A question for the philosophers I guess 😅

[@jzghostrider66]

NOPE it's NOT a Revell kit anymore is it?

[@EbroinSong]

Very deep..

[@ralphford4302]

Following your videos is like being enlightened. To see a master at work gives me so much joy. The things i have learned time from your builds are never lost. Truly inspiring

[@Pizzpott]

Been waiting for what seems like an eternity for this next instalment. Amazing, as always..

[@sm4231]

Again, most outstanding work. I get kind of sad when looking at the one I am building. But, your craftsmanship and attention to detail is truly an inspiration for me.

[@foreverplastickits138]

*Ebroin : - in this video it's about masking and ONLY masking!" 😀😁😉 Excellent work!*

[@SashaX19]

That camo is as beautiful as always *Chefs kiss*

[@brokeafengineerwannabe2071]

Thank you for all your hard work so that we can seat back and enjoy

[@DJ118USMC]

Wow, So pretty! Love German BB's. They are so beautiful looking. Again man AMAZING work! Look forward to the next Tirpitz video!

[@hewlett-packardlovecraft2297]

Glad to see you working on her again- although any video you upload is a treat. Enjoy the coming weekend.

[@colinritchie1757]

Superb painstaking attention to detail as ever , brilliant work as always

[@ebbergman]

Thank you for showing the trick with the Fairleads. I thought mine were poorly detailed too. Also, thank you for showing what colours you used for the hull painting. Will come handy as Admiral Hipper had a similar style in Norway.

[@telinoz1975]

The man. By lightyears.

[@jzghostrider66]

OUTSTANDING my friend. Well worth the wait. Cant' wait to see the next version.

[@Dutch_Spiderman]

Thank you again for sharing... love watching you work... you are without a doubt one of the best modellers out there...😊

[@theloafnoodle804]

I remember painting the hull for my 1:570 Tirpitz and it was a pain (mainly since I masked nothing, just hand painted all, sketching the camo on with a pencil), I prefer her sister ship for the paintjob alone (just slapping on some stripes)

[@l.h.7810]

This video is very important , thank you.

[@usssaratogacv3lefevre978]

I agree with Michael, because there nothing left to say.

[@sampoultney7373]

Yes. Evening complete now

[@enricobacchini8212]

Davvero notevole, di grandissimo livello.

[@leftpastsaturn67]

Breathtaking. Thank you.

[@silverdragontm9548]

OH HELL YEAH! 😍😍😍 I was looking forward to this for so long time! Greetings from Berlin ^^/

[@dolphfren]

Took the words right out of my mouth

[@IsKor06]

fantastic work, as usual. And as usual I'm astonished by your masking work. Out of this world. Congrats!

[@rik4010]

Incredibly beautiful work... I really enjoy this...👌

[@JuanGarcia-up2gz]

Outstanding work keep up the good work my friend

[@loken67]

Masterfully done - awesome detail work.

[@hulkeysmash]

Beautiful work

[@GilKoong]

이 새벽에 이렇게 소중한 영상을... 자려고 했는데 보고 자야겠네요..ㅋ 감사합니다^^

[@lyankim2012]

ok, Ebroin CREATING again !!

[@studioblueocean4590]

저 매직스컬피라는건 오븐에 넣지않아도 저절로 경화가되는 스컬피인건가요? 정말 마술같은 재료네요.

[@EbroinSong]

사실 매직 스컬트는 스컬피가 아닙니다. 주제와 경화제를 섞어 쓰는 좀 무른 에폭시 퍼티의 일종이죠. 본래 이름도 매직 스컬피가 아닌데 수입사 측에서 스컬피에 편승에 보려고 그렇게 부르는 거 같네요.

[@scotsbear1]

I have this kit, and it’ll be staying in the box, cos I’ll never get it even close to how this one looks……

[@zzampsindustry4904]

이 영상보니 오랜만에 함선작업하고픈 욕구가 차오르네요 ㅎㅎ

[@gx_am7]

This has got to be my favourite part of the Tirpitz series, the hull masking and painting is so nice to watch, when will it be finished? Have you made anymore progress? Either way this is beautiful.

[@落苏-v8f]

Oh my God, Tirpitz is resurrected

[@ferguskenny4578]

Just curious - why mask the whole deck with tiny pieces of tape? I can understand the tiny areas, but for the larger areas of deck, why not use larger pieces of masking?

[@EbroinSong]

I used larger pieces. And if the piece is big, I only can use limited place, and if the piece is smaller, I can use it more places.

[@upcoming]

@@EbroinSong You're a god mode modeller but a tetris player you are not :P

[@ddjohnstonbetween2brests639]

Where did you learn how to model like this? For me its just learning by doing/tutorials. But my models look not half as amazing as yours. It's quite inspiring to see, i hope ill reach a similar standard one day.

[@Cochise_Chiricahuas]

Very nice !!

[@mochiito6844]

정말 미쳣네유 ……

[@Profeta84]

perfect

[@lqendoehcwe]

Awesome!!!

[@scottbarrowcliffe1297]

Masterpiece.

[@openheart5761]

멋있어요

[@FORTworkshop]

Amazing!!!

[@marcellos.4999]

Wow!

[@SculptingIndonesia]

hi bro, when you do sculpting again. thanks

[@EbroinSong]

I am editing my sculpting video, now. And I will start a new one soon.

[@SculptingIndonesia]

@@EbroinSong nice bro. awaiting for New video. thanks bro. hope you success always. gbu

[@markbonnici6823]

Hi Ebroin, just finished watching your latest Tirpitz video, another fascinating built, really enjoy watching you work. Noticed you used AK and Lacquer paints, l haven't had much experience with either, what thinner did you use and what ratio. Thanks.

[@EbroinSong]

Thank you for watching! The ratio depends on the thickness of the paint, the air pressure, nozzle's size, and how much you want to spray. Normally, 1:1~1.5 for lacquer : thinner for a new bottle of paint. For acrylic, there are series that already diluted, like Vallejo Air series, you just pour it into your airbrush without more thinner.

[@christianstahl4099]

Unfassbar gut!

[@Katachimoto]

Hi Ebroin, another big thank for content that you have shared with us. One question: why did you decide to clue parts and equip on the deck prior painting? I think it would be much easy to paint them separetely

[@EbroinSong]

I need to affix some pipes around the turret mounts above the deck. If I affix them after applying the deck sticker, I have to use super glue on the painted surface, which I really hate to do. And the deck sticker need to be corrected. I can't correct it before it is applied.

[@deusexmachina6260]

Great work! Why do you mask the deck with so tiny pieces of tape? Do you think it its easier to paint the deck before placing a wooden sticker?

[@EbroinSong]

I need to affix some pipes around the turret mounts above the deck. If I affix them after applying the deck sticker, I have to use super glue on the painted surface, which I really hate to do. And the deck sticker need to be corrected. I can't correct it before it is applied.

[@deusexmachina6260]

Clear, thank you

[@Batka]

This was awesome again, but i am still recovering from the MIssouri videos...

[@ПавелНечаев-ц8д]

Very nice)

[@dr.abhijittalukdar9038]

RIP Triptz and Bismarck

[@dr.abhijittalukdar9038]

hiiiiiiii

[@EbroinSong]

Hi!

[@dotdashdotdash]

have you finished it yet?

[@EbroinSong]

Far from it.

[@cristianopersi7953]

Why not 3d print tbe parts? looking forward.

[@EbroinSong]

Because a good 3d printer is very expansive.

[@cristianopersi7953]

@@EbroinSong well it depends. But your skills are so good, you are better than a 3d printer. 😂

[@mymodelism]

👏🏻👏🏻👏🏻

[@garrettledford1147]

...that's not fair

[@davidrossi5096]

5th! 😂

[@davidrossi5096]

You’re outstanding by the way. I’ve been in the hobby for 2 years now, only really getting awesome at it in the last few months. I’m almost 100% AFV having been inspired by Plasmo and Panzermeister36. However, since I started watching your vids I just bought a monster Tamiya 1/350 IJN Musashi along with the $180 Flyhawk upgrade kit and I can’t wait to finish it up two years from now 😂 thanks for the inspiration though for real!

[@EbroinSong]

Good for you! Flyhawk's PE set is quite challenging. but its detail worth it. I hope you will successfully finish the Musashi. Thank you for the comment. =)