1 Point Hitch and Implements

[@raylebonville7499]

Wow! Just what I was looking for. I was starting to seriously regret buying my 1 point wheelhorse. Now I can buy / create implements to do more than just cut grass and push gravel and loose dirt. TYVM

[@joalin947]

Thx, buddy! You just gave me solutions and inspiration to build stuff to my lawnmover. I absolutely ❤️ this! Joa in Sweden.

[@JasonPrashaw]

Thats is one awesome set up there really like the old craftsman garden tractor realy nice

[@MrMaddparkison]

Dude i just finally found the correct size drive belt for my gt6000. An now im looking for what all attachments went for these little beasts. After seeing this i might just make what i need. Awesome demonstration. Thanks man

[@championplayerdo7604]

I was actually most impressed with the unit you built out of a hot water tank. You remind me a lot of myself 👍👍

[@Rusty_Nickle]

If you weld a 6-in bar on top of your latch going straight up and then tie the rope to the top of it that'll give you a more leverage and save you on ropes. Probably make it easier to open too. At any rate awesome setup. I wouldn't mind having something like that around

[@TrehanCreekOutdoors]

Awesome creativity. Thanks for this helpful implement review.

[@MikeOrazzi]

Nice set up.

[@larryfinch1529]

Just bought my 1995 Gt6000 18hp Kohler w 6 spd hi/low in good cond for 100 bucks! ! I was worried because its missing the bottom triangle of the sleeve hitch. However you solved my problem! Thank You!!!!

[@scottmorse1798]

grads to the score! best 100$ youll ever spend

[@timothywilliams2021]

Instead of a hand crank I'd put an electric motor on it. Probably something like a windshield wiper motor. They are 12v with gear reduction and usually variable speed. Should be easy enough to mount then add sprockets and chain.

[@claudecoleman7446]

You have taught me so much today thank you 🙏🏾

[@philliphall5198]

Really great ideal’s and work well to Keep thinking 🤔

[@freakinowned]

Question I’m doing a winch in my gt6000 to operate my craftsman dozer plow as well do I need to cut my plow like you or can I just not have it continued to implement lever handle linkage

[@spencerrodgers]

I’m just curious on where you got the plows

[@ddynoah9208]

I'm having a hard time finding a replacement seat any ideas

[@theruralwrencher945]

I know this was a little while ago when this comment was posted, but if you still are having trouble I would suggest going to a steel pan seat from an older garden tractor. I put one on my 1844 mtd and it worked great.

[@walkashanger]

ebay

[@AUTISTICBLOGGER_steven]

Would you consider that a tractor and not a lawn mower

[@mowerbro4212]

What would be you suggestions for breaking ground on a old gravel driveway with really compact soil.. almost all gravel is gone Really over grown Hasn't had much love in years. Suggestions so I don't waste my money 💰

[@redneckcomputergeek]

If it was me I would go with a cheap ripper amzn.to/3E0puHr

[@gml326]

Could you back a back blade for a john deere 739 that i could use to back into places and drag snow out of with a 12 volt lift

[@josephpacheco7508]

Time to modify that rear winch and 1pt hitch. Put a pulley on the crank rod where the handle attaches and move your winch to the top of the 1pt hitch and now you've got remove work on the fly.

[@TylerHankss]

Do you find that those chains help your turf tires grip? I’m debating on ordering chains for mine. Thanks!

[@dancassidy5209]

I’ve got chains on my cub cadet. Put them on to mow my field with a pull behind brush hog and just left the chains on cuz they helped a lot with traction anywhere. Highly recommend.

[@ArslanSattar-v5b]

7/7/7 clearer line maker and wheat 🌾 pointer to clays

[@jimmycarter9099]

Love you and your video😊

[@jwiereng]

1:04 Warn I hear you say Warren

[@spiritdewitt6486]

Hey brother what part of Maine are you from .I'm in Glenburn just outside of bangor.

[@jeremymanuel5069]

where r u located in ME? I grew up in China.

[@DannyAllen10271966]

What part of Maine do you live in? I lived in Newport just off of rt7 good job putting your stuff together!

[@joserenteria9417]

What transmission does that trctr hv and what hp

[@jtaylor9355]

What is the point of the lock nuts on the shaft?

[@daveb3910]

Very cool thank you

[@lindseyloo6619]

This is glorious omg thanks

[@thomascooper6679]

Love your stuff !! Just found you and instantly subscribed. Did you say your GT6000 has a Roper transaxle ? I just watched your tug of war video and you said it had a Peerless 633. Did you swap out at some point ? Did you do a video ?

[@redneckcomputergeek]

It's a 633A Roper but at one point was supported by Peerless. Now all support for them is discontinued.

[@thomascooper6679]

@@redneckcomputergeek Was the Peerless/Roper 633 original to your Craftsman GT6000 ? I'm looking for a trans with hi/low for my Craftsman but not sure how to figure out which old models have this.

[@rockiemountin7535]

You have a snow blade and a dozer (for dirt) blade the dozer blade is much heavier and stronger

[@rumplestillskin6424]

Is the jeep Cherokee for sale

[@dharmesh.jpatel2013]

thanks for share

[@AZHighlandHomestead]

Subscribed

[@noworriesmate5903]

6-18-24 Amazon $159.99 one point hitch

[@redneckcomputergeek]

Yup company got bought out. But being the only one on the market they get to set the price.

[@MJ-em2ix]

3:13 lol

[@masonreppeto882]

Fucking cool shit man/

[@charleydaniels6563]

God damnit hill Billy