1 Sheet of Plywood Collapsible Platform *Free Plans

I thought it would be a fun design challenge to use only one 4’x8’ sheet of plywood and still have everything I wanted in an SUV bed. It certainly is not the easiest build but it just might be the most satisfying. The bed expands and collapses and with the folding headrest the platform is 6 feet long. The table slides out for easy meal prep and the whole thing is super easy to take in and out of the car. We’ve already taken it on a few road trips and it’s proven a great way to sleep in the SUV.
This particular build is for a 2014 Honda CRV. Check out the .pdf for all measurements.
INSTRUCTIONAL .PDF WITH MEASURMENTS
mattthedesigne...
Helpful Channels:
Cinema 4D Video - Michael Balchaitis
• Model a Wheel and Tire...
Car Battery Fix Video - Adam YH • How to Replace a Car B...
DIY Track Saw Video - HouseImprovements
• How To Make A Straight...
Pocket Holes 101 - WoodWorkWeb
• Pocket Hole Mistakes t...
My Tools:
Oscillating Tool: amzn.to/3NWxSuE
Circular Saw: amzn.to/3NT365y
Drill: amzn.to/3OciGJw
Steel File: amzn.to/3xqeuz4
T-Square: amzn.to/3NT3d0Y
Pocket Hole Jig: amzn.to/3MPnUJO
Pocket Hole Clamp: amzn.to/3aSUcGH
Pocket Hole Screws: amzn.to/3mLYW3K
Camera Gear:
Camera - Panasonic GH5: amzn.to/3O44jqy
12-35mm Lens: amzn.to/3NRHNkS
Tripod: amzn.to/3xnQL2t
Lavalier Microphone: amzn.to/3xjpHRS
*Those are Amazon Associate links which means I get a small percentage if you click through and buy any of those things. No pressure. Thanks for watching.

[@edsbts7038]

Probably the most unique sleeping system on KZbin. The fact you used one sheet of plywood is impressive.

[@MattTheDesigner]

Thanks Ed! Plywood is expensive these days. I figured why not give it a shot.

[@RomanMyshoul85]

@@MattTheDesigner It's very cool, the simplest solutions are the cleanest looking and by far the best. Tiny note on pocket screws, they are useful when you don't have access to other side, but if you do, the other way is stronger.

[@rh-bd6wv]

KZbin is the next best thing to having a lifetime of experience. Thanks to everyone who shares.

[@MattTheDesigner]

There’s never been a time like this in history. Pretty cool.

[@michaelfranklin8850]

Two years later and am just finding this gem! I am a one handed builder so I’m having to make a lot of adaptations in the build process and loads of mistakes but this was the first plan/video that actually seemed obtainable. Thanks so much!

[@Ulbre]

Hey Michael, that's awesome....do you have your own you tube channel? If not then maybe you should......One Handed Builder would be a great name for it :)

[@ArturNiziolek]

My partner and I wanted to build a bed for our 2016 CRV. We needed my dads help because he’s handy. He wasn’t really keen on the idea but he came across your video and he was hooked. He printed your plans, brought them to Home Depot and was really committed. We plan to use it this weekend for the first time, just waiting for our trifold mattress to arrive. Thanks again!

[@MattTheDesigner]

Cool! Post it somewhere when you’re done at let me know.

[@MattTheDesigner]

Cool! Post it somewhere when you’re done at let me know.

[@zayas6999]

Oh man that's so cool! Hope that it works out as well as the one in the video. Have an awesome weekend!!!

[@MattTheDesigner]

I’m going to sell those first three comments as NFTs some day. We can profit share.

[@jolewis1682]

You did a great job! Are you selling any yet?

[@MattTheDesigner]

@@jolewis1682 NFTs or camper beds? No to both haha.

[@jolewis1682]

@@MattTheDesigner bummer, let me know when you do. 😊 You have a business here. Merry Christmas & God bless you!

[@Shae_3]

Can I pay you to make this for me?!?!

[@MattTheDesigner]

@@Shae_3 the NFT or the bed? Either way… not at this time. 😁

[@Grinsauce]

Outstanding design. Awesome video! You are brilliant.

[@blackwhite9177]

This is THE BEST DESIGN EVER 👏👏👏👏👏

[@Moffenson]

You gave us a FREE PDF FOR IT, I love you!

[@jorgevaldez8811]

I’ve been looking for something like this for months! Thank you so much. Might make some adjustments but overall will follow what you did. Thanks again

[@musimusihada]

Only a few hours of Cinema 4D? Disney must hire you.

[@MattTheDesigner]

Haha! It's all straight lines. As soon as you start adding curves and cutting holes in things it get's way more complicated.

[@GrantSR]

Apparently, other than the trial, there are no free versions of Cinema 4D anymore. Fortunately, freecad is now almost ready for that 1.0 release.

[@jean-paulricketts3533]

Dude, thanks so much for this!!! Just built one for my 2005 CRV with some minor changes. Used your 2nd build's base and then fitted some runners for the tabletop and covered the whole thing in interior trim, less glue, no pocket screws and hides the screws, then secured with 2 location pins. Stoked!

[@MattTheDesigner]

Sweet! I was hoping people would take my ideas and make it their own. Thanks for sharing.

[@bnosluoc4830]

What height did you need for the legs to clear the rear seats? I sort of thought about 36cm for my 05 Cr-v. Also the front and back legs can be the same height right? As the floor is flat

[@silkefletcher1822]

Do you have some pics? Im trying to find a build to fit for my 2009 Honda CRV.

[@jean-paulricketts3533]

@@bnosluoc4830 sorry, just saw this now. I used an extra sheet and made legs the same length as base section, i.e. created a box for storage, so no open sides and opted with either 400mm/450mm in order to clear the back seat when folded/use the folded back seats as support for the middle section. The headrest section folded out with piano hinge and I can set it to lean up against front seats, like a day bed, or lie flat for when sleeping, without building any additional supports.

[@jean-paulricketts3533]

@@silkefletcher1822 i do but not sure how to share on here 🙅‍♀🙈😄.

[@mjrodriguez7378]

This is so awesome! just started doing some research because my daughter has agreed to help me build out my SUV for camping...she's my "handy-woman". She will be so excited that I found this awesome build! Thank you!!!

[@MattTheDesigner]

M J Rodriguez glad I could help!

[@OldZenMonk]

You’re funny Brother, “I didn’t know how to but I watched a bunch of KZbin videos” … and here I am watching you!….thanks for your efforts, my college daughter is ecstatic with her new build…thanks to you 🙏🏻

[@MattTheDesigner]

KZbin has all the answers! Glad I could help y’all out!

[@grizzbuck]

SUGGESTION MOD- To reduce weight of the build & provide circulation to the mattress (helps to eliminate mold from condensation), you might want to drill a hole pattern in the platform & supports. Great design!!

[@MattTheDesigner]

Good idea! If we start going on longer trips where the bed is made up for a while I could see that being helpful.

[@flowersafeheart]

Excellent idea!!!!

[@conorsweeney8447]

Hey Matt, we are almost 3 weeks in to a road trip across,down and back the country. We modified your design to fit in a Dodge Journey. Got it built in one day, but we used a CNC and Kreg Jig machine to get it done faster! Video below. Thanks! kzbin.info/www/bejne/gYrLpWyFjLRle9k

[@MattTheDesigner]

Wooooaaahhhh!!!!!! So cool. I can’t tell you how happy this makes me hahah! I will be your second subscriber.

[@DivineMisterAdVentures]

Did you think about having one that just raises up? I'm going with that - much faster in practice - everything stays put - can raise it or lower it more or less - works for a trailer - why not a SUV? Get to work!

[@MattTheDesigner]

This is used as a daily car. It needs to fold into the trunk so the back seats can be used without taking the bed out of the car.

[@deanwolfechannel]

I have a 2003 crv. Will be interesting to compare dimensions, whether your dimensions will need mods,,

[@MattTheDesigner]

I’m sure they will but you are obviously a man of many talents and won’t have any trouble. Will your CRV adventures make it to your channel?

[@juliomoraes8165]

Congrats, you managed to show this good solution in a short, no boring video.

[@tweetyArtist]

I absolutely love how you research KZbin videos to find out how to do things!!! I do too. And giving the links to the videos you used is extremely helpful! Thanks!

[@bonzer2u]

We have a pilot with 2nd row captains seats that your design would work brilliantly with. Thx...

[@MattTheDesigner]

Awesome Mike! Glad I could help.

[@TanVanLang]

Thank Matt, I followed suit and had a bed on my Mazda CX5 ^^

[@MattTheDesigner]

Post a vid!

[@whereswonn]

Love this design! I did something similar but yours is much cleaner. My pull out table is on drawer tracks, but I think I want to simplify down to just a friction system like yours - quick question, are those wedges on the plywood table simply glued on, or are they screwed as well?

[@MattTheDesigner]

Thanks Alli! They’re just glued on. So far that’s been fine.

[@ENFPerspectives]

It’s awesome how you credited your sources! 🙌

[@markbaker42]

JUst brilliant Matt. I have watched this a few times now and also the 2.0 version. I think your explanations and logical thought process sync with most people. Thanks a bunch mate, cheers from Oz.

[@rickt1951]

You should take orders and if you do I'll be first in line. Without a doubt the best simple design on youtube.Awesome.

[@MattTheDesigner]

I appreciate RayRay. Thanks for watching!

[@benwhite3227]

Great design and appropriate plugs for resources. I especially like the ramp and wedge.

[@MattTheDesigner]

Glad you like it!

[@napman99]

This is by far the best one I've found for my Toy Highlander SUV. Thanks a bunch.

[@MattTheDesigner]

No problem Napasak! It was lots of fun to make.

[@Robocalypse0101]

Does it feel level in the Highlander or did you need to modify it?

[@napman99]

@@Robocalypse0101, no, it's not level for my 2013. It's incline higher at the second row seats when folded down. I simply take them off and have so much more space for stuffs.

[@stevesidare2493]

Well done! (PS: That music part was a gas!)

[@MattTheDesigner]

Thanks Steve! You never know how a bit like that will land. Glad you enjoyed it.

[@TimmyLodhi]

Holy moly! I’ve been looking for a build just like this for months now. It didn’t show up in searches cause I was using Honda CRV build in the search. This is the best build video by far and the fact you included measurements is insane. Thanks so much Matt. Can’t wait to get started on mine.

[@MattTheDesigner]

Thank Timmy! Your channel is SICK. I subbed. Let me know how your build goes.

[@TimmyLodhi]

@@MattTheDesigner Nice dude. I’ll keep ya posted on how the build goes!

[@TimmyLodhi]

I ended up getting 1/2" plywood on accident. Did you feel like the 3/4" was sturdy? When I built it out and tried laying on it, I noticed it dipped quite a bit in the middle. Wondering if it's worth re-trying with 3/4"

[@MattTheDesigner]

@@TimmyLodhi I haven’t noticed any flexing on ours. I used 3/4 and it was hardwood plywood. I’m not sure if that makes a different in strength. I just chose it because it looked good.

[@TimmyLodhi]

@@MattTheDesigner I feel ya. I should’ve gone with 3/4. Might need to give it another shot 😂

[@EMPI]

good video

[@CameronBurgessuncompromise]

Hi Matt - love this design, and was planning to modify it for my Gen 3 Pajero, but have lost the plans, and can’t seem to find them on your website. Hoping they’re still available somewhere (sent an email via your website also). The new bed design is also great, but we need the height of the original in order to accomodate a 140cm wide mattress for two humans and a 40kg dog :-)

[@MattTheDesigner]

There’s an input field at the bottom of the project page on the site. It should auto send to you from there.

[@CameronBurgessuncompromise]

@@MattTheDesigner - thanks Matt. Seems to not be working on Safari desktop, which is why I didn't see it (might be a client side issue also). Definitely works on Brave/Chrome.

[@GardenGirls1]

Not there ​@@MattTheDesigner

[@MattTheDesigner]

@@CameronBurgessuncompromise weird. I can see it on Safari. Maybe a pop up blocker issue?

[@ImDBatty1]

From humble beginnings, to where you are now! Still enjoyable videos, and definitely looking forward to seeing what's next! 🤠 Don't forget to update your playlists, since you've done several projects for your rig! 😏

[@njrx7t2]

I myself watch and learn how to do many things from online but I believe this dude can perform brain surgery just by following Utube videos.. Kudos on the awesome learning & building abilities! :)

[@MattTheDesigner]

I just need someone to volunteer to be my patient. 😂 thanks for watching Anya.

[@njrx7t2]

@@MattTheDesigner Put up a wanted ad online.. 😁

[@GreenlifeFin]

Yeah, he is so clever and handy, wowww!

[@now_what56]

This is so cool! I have a CRV. I could build this and do like "Travel Grandma" (leave hubby at home and go traveling).

[@MattTheDesigner]

It’s more comfortable solo anyways haha. Sorry hubby!

[@sapphiretiger9129]

Great video! I agree; it is the definitely the most satisfying build I have watched to date, and I have watched a lot. :-) Thanks for sharing.

[@carlosaugusto1047]

Genial!!!! Eu estava procurando por um projeto de cama que fosse legal pra fazer na minha CRV 2010 e vi que você vez algo muito bem montado e interessante. Obrigado por compartilhar!!!

[@sjvlogsthestoryofjourney]

Very very interesting and useful information 👍👌🙏🌹

[@ENFPerspectives]

Should be a plastic version, with foldable legs?

[@TheVik2727]

WOWWWWW, will you build one for me? 😁

[@MattTheDesigner]

I think the shipping would be expensive and complicated. Haha. But the plans are in the description. 😁

[@mrs.onyango6504]

Great folding bed, thanks 😊

[@marianam8643]

Thanks very much for making this video.

[@jnzk6467]

This is absolutely amazing you’re so smart and talented

[@bigbroda45thpres78]

I like this, but to put over the seats the transport a standard sized or longer pallet..make it durable.. for expediting…

[@IRLSuperb]

You need to clean that corrosion from your car battery before installing the new one. Otherwise you’re gonna have issues with a new one as well down the road.

[@poerava]

This. Is. Absolutely brilliant. Do you sell these units?

[@MattTheDesigner]

I do not. I’d need a whole lot more than a 1 car garage. Check out solidwoodworx though.

[@poerava]

@@MattTheDesigner Ok Thank you

[@rachellehadlock5902]

Thanks for sharing this and including measurements! You did an excellent job of explaining things too. I just bought a 2014 Honda CRV and have been looking at different options. Yours is practically perfect. I will use this with some modifications. I want to be able to leave the smaller 40 section of the 60/40 rear seats up but have the option of a wider platform if I want a larger sleeping area. It will need a little more wood for a second set of guide rails but no big deal.

[@MattTheDesigner]

Oh man that sounds cool! Would love to see it when you’re done.

[@Hobbies4Hire]

Great job on the video Matt! Thanks for making it.

[@zddin6962]

Nice sharing my friend 🫰🥰 I like it, thank for the video... Simple but looks neat, well done. I get some idea to transform my mini car in to mini camper car 😍✌️

[@MattTheDesigner]

Thanks! You're going to have a blast building it out.

[@benw1046]

Love this! I couldn't catch if you mentioned it in the video. How thick was your ply? 1/2 or 3/4?

[@MattTheDesigner]

Thanks Ben! It’s 3/4.

[@jagadishvelisetti75]

This is Awesome 👍👍

[@SimpleOneSnapVlog]

I have Honda Crv 2015 is that possible can you make me one and sell it to me please! This will make my wish come true. I wanted to try camping with it and or I live in my CRV.

[@MattTheDesigner]

It should be very similar! I think you can make it!

[@snakeclaw]

I could see the benefit of building one of these but the build time would have been insanely quicker using 2x's and screws instead of all that pocket hole stuff. Overall it's a good build. Btw. I think the handle for the sliding table is unnecessary. It gets in the way for storage below. A couple of finger holes would have been sufficient

[@MattTheDesigner]

I agree. Holes are on the list if I ever remake this one.

[@GreenlifeFin]

Wow, I am impressed. I don’t have the skills or tools to make it like this, but this gave me good ideas to make a bit of more simple edition of this.

[@MattTheDesigner]

Thanks! There is for sure an easier way to do this haha. Good luck and I hope you share you project with us. :)

[@SuperClare]

Awesome design presented with thought, skill, and with genuine execution! Well done Matt. I don’t own any tools other than a hammer, measuring tape, and screwdriver. What other tools are “must haves” to build some cool stuff???

[@MattTheDesigner]

You can do a lot with those. One major thing missing is a saw. Circular saws are pretty great but a hand saw is fine to get you started.

[@Arsenal-Tengu]

Possibly the cleanest camp set up I've seen in the last couple of days! Inspired me to do a similar set up in the future. I have a question, however. For the headrest part, you're relying solely on the hinges only? What if you accidentally applied too much force/weight on the headrest part, wouldn't it break?

[@MattTheDesigner]

In our CRV no. It mostly rests on the folded seats without a ton of overhang. But that will be different with different cars.

[@harrypottah8889]

this is AMAZING... I'm absolutely doing that back piece for my SUV... do you have a build list/details for this??

[@MattTheDesigner]

Check out the one I have linked in the description. I was thinking I’d make a more detailed version if anyone asked. Looks like I might have to do that!

[@harrypottah8889]

@@MattTheDesigner yes please!

[@MattTheDesigner]

@@harrypottah8889 bit.ly/2RG3OLa I added more detail. Let me know how it turns out!

[@bdycouver]

Awesome! I’ve been looking for months for a build like this. Just finished modifying it slightly to fit my Honda Pilot.

[@asaburton8846]

I followed along with your instructions and video. It is a great design and very simple. The fact that it is in two sections cuts down on the hassle of loading and unloading it. I was stuck for so long trying to think how I'd like to build a sleeper platform for my Jeep. Following your idea allowed me to get it done and now I'm happy to have an ideal platform for trips

[@MattTheDesigner]

That’s great! I’m glad it worked out for you.

[@officialWWM]

I made a similar design, except, my top piece slides one way to make the table, then the other way to make the bed :)

[@MattTheDesigner]

Whoah! Love that’s idea. Maybe I’ll try that on the next one. 🤔

[@officialWWM]

@@MattTheDesigner it was a lot easier to build than yours…cause I’m not as clever as you, lol.

[@TheresaSanford]

Clever...and don't forget the removable table stashed under the carpet un cargo area

[@officialWWM]

@@TheresaSanford lol, my table is attached to the back of my drop down rear wheel carrier :)

[@anniesshenanigans3815]

I don't have any tools but I have thought of making something like this for my suv.. There is a really steep incline after the initial 2ft. I am thinking about getting a 4x8 sheet of plywood and have it cut up so that I could layer it and even out the back for my bed. Been puzzling over it in my head.

[@MattTheDesigner]

You may be able to find sturdy drawers that are the right height and prop the end of the bed up on that.

[@jonwheatley]

amazing!

[@kevintraschler1507]

Hi Matt, I’m Kevin. Your feed came up, as I was watching KZbin. I’m mesmerized. I’m creative in my head, but not mechanically inclined. I’m also in a wheelchair. S#it happens. We just bought a new to us, pickup. And to be able to GO camping..sleeping in the truck bed will be necessary. Can you help me build a platform with a drawer? We have a GMC Sierra 1500, I’m hoping to get a camper shell, within 3 months. Today is July 10, 2022

[@MattTheDesigner]

Hello Kevin, would love to help you but with a full time job this is still just a hobby for me. I’d recommend making a play list of all your favorite truck builds and show them to a local carpenter. Everything I’m doing should be pretty easy for a trained professional. I hope that helps and let me know if there’s any specific challenge you’re trying to solve but aren’t finding existing solutions for on YT.

[@MTBikeBo]

Your video is so well made. I enjoy watching it.

[@MattTheDesigner]

Thanks @MTBikeBO

[@yevhen4894]

Дуже дякую за ідею. Ваш варіант просто чудовий, мені він підходить. Я постараюсь його повторити. Бажаю успіхів вам у вашій праці, гарного вам дня.

[@pingster6836]

I loved your video and used some of the ideas to make my own platform for my Forrester. I also now love pocket holes!! Thanks Matt! Yet to test it out as we hit COVID lockdown here in Oz!

[@MattTheDesigner]

That’s great! Isn’t youtube amazing?? Haha

[@d0ugparker]

"We're living in amazing times." Agreed. ☮

[@lorawaloski]

Ok, I got as far as "I measured the SUV and then watched some KZbin videos about Cinema 4D" when I closed the other browser window where I had Autodesk Fusion360 and some other YT tutorial videos for that software while making my own plans and realized there are people out there like me 🤣

[@MattTheDesigner]

There are plenty of us here on KZbin! On my next build I used sketchup. The free version is a bit limited but it was easier to learn IMO.

[@jennatrammell2899]

Looks great! Can you convert it from collapsed --> bed from inside the car?

[@MattTheDesigner]

I haven't tried that yet but yes it should be pretty easy to do. Just fold the seats down and slide the middle section back.

[@canslono1084]

Great video! Thank you for sharing

[@BreakAllLimits99]

Just wow, a similar kind i made, the difference is i made it with drawers, that can be used as a car kitchen.

[@nicoxgfwl]

Super cool! Loving the idea and how you re used the door hinges! Question: do you think rubbinig wax between the table and it's interior would help with the sliding friction? or just not necesary? Great vid

[@MattTheDesigner]

I do think it would help. I should probably give it a try.

[@teresas226]

Total novice here. Just wondering if anyone has attempted this with a Subaru Outback? Thx!

[@MattTheDesigner]

I'm sure someone has. I see those things everywhere.

[@MidweekPerfect]

Awesome 👌 👏 ❤ love from India 🇮🇳 😊

[@chucklongora6099]

You are one smart dude. I hate math! LOL. Can you just make one for me? 17 Nissan Sport Rogue???:)

[@MattTheDesigner]

1 sheet of plywood + 5 hours of manual labor = endless joy You can do it! Haha

[@rashig.5814]

What kind of plywood did you use? And what's the thickness - 3/4" or 1inch?

[@MattTheDesigner]

I used 3/4 "hardwood plywood". Mostly because it looked better but standard ply works fine.

[@holdingcopsaccountable6554]

Best one I seen so far. Very well done.

[@malcolmspeirs4491]

Thanks ,

[@josevalenzuela213]

OMG can you do me a design for my 2002 Ford Explorer I go camping a lot With my wife and my son.

[@MattTheDesigner]

DIY! You can do it!

[@dianakrebsbooks3744]

Amazing video, thank you! Is there something that stops the middle section of the bed from sliding forward off that lip?

[@MattTheDesigner]

When I unfurl the bed I slide the front seats forward. Once the bed is set up I slide the seats back. The back of the front seats push against the front edge of the bed and hold it in place.

[@roadking7338]

Hey Matt, This is awesome. I have a 2021 Pilot. To save me sometime, can you send me your specs? Love it Thanks

[@MattTheDesigner]

Thank you!!! There’s a .pdf with all the dimensions and step by step instructions in the video description.

[@nightstringers]

I have watched a ton of these types of videos .I like yours the best. It's not over built lighter weight AKA Better gas millage .Instead of wood draws long plastic cover totes would be perfect . Thanks for the awesome video my friend .

[@tooyevaar5009]

Nice work, great design, thank you.

[@MattTheDesigner]

Thanks T!

[@ttapping]

At $1000 per year, Cinema 4D is undoable....

[@MattTheDesigner]

Use sketchup.

[@markstevens4264]

I didn't even take the time to look at a second video of yours. After this one, I immediately subscribed to your channel. Can't wait to try this in my Toyota Highlander AWD SUV. Thanks Matt. I'll be checking out your other videos too.

[@nobody1225]

謝謝！

[@MattTheDesigner]

🙏🏼

[@maggiemao6472]

Nice. Thanks for sharing.

[@TheRealTomSelleck]

Thank you so much for the video and the pdf! Instant subscribe!

[@MattTheDesigner]

Let me know how it goes!

[@aprilbaxter2578]

I really like the simplicity, however I don't think I have enough skills to make it for my car.

[@MattTheDesigner]

Skills can be acquired. Just try it.

[@realtyfocus4618]

Very good effort, keep it up........

[@IRLSuperb]

You need to clean that corrosion from your car battery before installing the new one. Otherwise you’re gonna have issues with a new one as well down the road.

[@MattTheDesigner]

💯

[@wellnessotr]

Pocket holes are the bomb!!

[@sunkenpath9060]

Your CRV may have a fold out table in the spare tire well, under the carpet in the back.

[@MattTheDesigner]

I think I just missed that generation.

[@alisonleigh]

Hi, I'm all over your channel today. I know you made an updated and improved version with drawers, but I think I'm going to make a modified version of this for my Cube as a cheap lil starter project while I figure out if car camping is for me. Can't beat the cost of 1 sheet of plywood! Thanks again for the video and the free plans!

[@moonblink]

love the honesty at the end

[@amra4593]

What a brilliant young man!!

[@MattTheDesigner]

Golly thanks.

[@default9740]

Nice! I built a similar platform in a Landrover Discovery about 20 years ago: but yours is nicer!

[@carlosmariolopezgaravito8787]

de todos los modelos que he visto, es la mejor idea es perfecto

[@Torithewanderingma]

This is great. I didn’t want to build a full-length platform because I have kids and they sit in the backseat of my suv. I needed something collapsible

[@justinaugustinemartinez1222]

Thank you for telling me the dimensions right away!.. Can you sleep a 6 foot person there or is it tight?

[@MattTheDesigner]

Sleeps a 6 footer now problem as long as they are less than 5 feet wide. 😁

[@MaryOKC]

I like this …so I have a really light system so if I’m citing family for a week or two during my trip I can easily unload my rig and stick in a corner of their garage then use my vehicle like a normal SUV transporting family and friends. I’d love a more fixed unit like this but I keep one side of my unit open for my cooler and a plastic drawer bin for all my storage and cooking supplies. I need to take much less stuff but I use it all when traveling/car camping!