1 to 1 Output Patching - Firmware V4 for Behringer X32 / Midas M32

This video shows the 1 to 1 Output Patching for firmware 4 for X32 and M32. for The latest and GREATEST firmware update for digital console Behringer X32 and Midas M32 is here. The version 4 firmware introduce a flexible and most demanded 1 to 1 patching. This mean I can patch channel one to local input, channel 2 from stage box via AESA, channel 3 from the PC via the card and channel 4 from stage box via AESB.
I always believe that 1 to 1 patching requires more processing power and always though the technology on these boards which date to 7 to 8 years ago are not capable to handle it thus the block of 8 patching. Kudos to the engineer of Behringer and Midas for being able to optimized the console further. thumb up to you guys!

[@carterchan5295]

just update yesterday, cant wait to use it for next show.

[@ivananderson007]

Eric you are a genius I’ve been trying to separate the 8 blocks 4 for card 4 for local and your technique through User works thank you so much 🙏🏾

[@ericcheesaihoo]

You are wellcome

[@kirks1031]

Exactly what I was looking for! Thanks!!!

[@ericcheesaihoo]

Glad I could help!

[@thadgan]

Thx

[@crazyband1452]

Salve ho fatto dopo tanto il nuovo aggiornamento firmware ma vedo i fader muoversi più lenti e il master al caricamento delle scene mi rimane a 0. Prima invece il master si caricava a volume settato con la scena .

[@lokmanjl9272]

Bro how to setup routing input/output behringer x32 connect s16 can share?thanks

[@hediel]

Cordial saludo. Hice la actualización a la v 4.01 y me removió todo el seteo de monitoreo que tenía. Tengo la consola para estudio y ya no puedo monitorear mientras grabo. Solo logro escuchar si selecciono card 1-8 en el input del routing. Antes no era así. alguien me puede decir cómo logro volver a monitorear sin seleccionar card 1-8. 🥺 Gracias

[@stratosFZ1]

Hi m8...i think you got a little bit confused with the user in&outs...this video is not correct when it comes to user outputs...the way you have routed the mixer at OUT 2&3 you are actually feeding your LOCAL XLR OUT No2 with the DIRECT OUT of your AES50A INPUT No2

[@ericcheesaihoo]

Hi, there is no particular routing objective to be achieved there. Just want to show the 1 to 1 assignment with AES50A, AES50B and output in the user tab and the new USER row in the AES50 tab

[@stratosFZ1]

@@ericcheesaihoo ok but this video is confusing people...I m just telling you to let you know...

[@aretagarziamarines2379]

hmm, what's the point of this ?? I don't get it

[@ericcheesaihoo]

To someone, it provide flexibility in term of signal routing