10 Budget Friendly Woodworking Tools 99% of Beginners NEED!

[@731Woodworks]

Sign up for KZbin Premium with my link to get 2 months free kzbin.info?cc=731woodworks& ▼EXPAND FOR TOOL LINKS and INFO▼ Watch Next: Amazing Woodworking Tools that Are On Another Level - kzbin.info/www/bejne/nHTGcmWuj8p5iM0si=1XDyeWgySfJolODa Tools in this video: (If you use one of these Amazon and other affiliate links, I may receive a commission) Suizan Flush Cut Saw - amzn.to/4eQjXUJ DFM Small Square (Amazon) - amzn.to/4cFpT1q DFM Small Square (direct website) - dfmtoolworks.sjv.io/Wqa41n Fastcap Old Standby - amzn.to/3RXcEkf Fastcap Easy Read Lefty/Righty - amzn.to/4cRbmza 123 Set Up Blocks - amzn.to/3WhxWM7 Combo 123 Set Up Blocks with Connection Kit - amzn.to/4cYn6A9 Combo 123 Set Up Blocks with Brass Set Up Bars - amzn.to/4cTTdRh Brass Set Up Bars - amzn.to/3LlgMqx Sanding Mouse - amzn.to/4bSWTSF Microfiber Cloths - amzn.to/3WhhETe Ruler with Stops (Amazon) - amzn.to/3S5MUlF Ruler with Stops (TayTools) lddy.no/1k3jw Hand Screw Clamps - amzn.to/3XXVWVv' 2-Pack Hand Screw Clamps - amzn.to/4f0hh75 Bench Cookies - amzn.to/3S041VY Budget Option Bench Cookies - amzn.to/3Lim0mR Hockey Puck 12-Pack - amzn.to/3xQNL2I Smart MicroJig Push Block - amzn.to/3WfSTqr iGaging Bench Squares (with pin as shown) lddy.no/1k3u7 iGaging Bench Squares (without pin) - amzn.to/3VZHqdf Graphgear Pencil - amzn.to/3Lf2nMB Truewerk Workpants (ones I'm wearing)- truewerk.pxf.io/XY36qX TrueWerk Hot Weather Workpants - truewerk.pxf.io/anqR0R Thin Rip JIg (Best) - amzn.to/3xHjjIv Thin Rip Jig (budget option) - amzn.to/3WfEvOV Never miss another tool deal. Sign up for my Tool Deals SMS Alerts - NOTE: I text out tool deals so you don’t miss any! text DEALS to 1 [phone] Be sure to add DEALS to your text to me so you get added to the proper list. You can also click this link my.community.com/731woodworks Important to add the word DEALS to the text! 🇺🇸 Join the Tubafour Nation on Patreon to get an exclusive Tubafour Nation sticker, access to exclusive member-only behind-the-scenes videos, member-only livestreams, discounts, and other cool member-only perks! www.patreon.com/731woodworks Some other useful links: Daily Tool Deals on my website: www.731woodworks.com/tool-deals Subscribe to our email Newsletter: mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter Check out our easy-to-follow woodworking plans: www.731woodworks.com/store Outlaw's Board Butter - So Good it Should be Outlawed: www.731woodworks.com/store/boardbutter

[@sparkythecorgi612]

Had every size of the Graphgear pencils when I took a cartography class. Very well made and will last a lifetime

[@IronHeel]

The Pentel pencil also has a great feature of retracting the tip and lead immediately when you press the pocket clip. When you press the plunger the next time, the lead and tip pop out. It's a nice solid pencil.

[@Stewarts_Woodworks]

I’ve had two of the sanding “mice” for some time now. I took a sharpie and wrote the grit for each on top for quick reference

[@adamcoe]

Can confirm, the green lefty righty FastCaps are excellent. I have 2, as well as 2 more more metric and a flatback. Hands down the best tape measures out there.

[@winfinit]

Thank you for awesome content! Those offsets on squares are center lines for 1/2” and 3/4” ply’s but mortise and tenon application that you’ve mentioned is a very creative.

[@fry216]

Love them Pentel Graphgear! Got 6 of em for the house and shop. .9 seems the most useful. Great recommend

[@jbcunn15]

Love to see a fellow NF fan! Love your content

[@GrandmawsWorkshop]

Thanks for sharing. Love all those items. Just got me some of those recently.

[@kennnva551]

Love Pentel mechanical pencils. I'm still using a 0.5mm version which I acquired in 1982.

[@brandie976]

Just used your code and signed up for premium, thank you! We'd actually just talked about it recently and when you mentioned it, we decided to go for it! Great video, as always!

[@731Woodworks]

You'll love it! I've been a subscriber for several years now!

[@SrStryker82]

Thanks, Matt. I really enjoy watching your videos.

[@ericb4608]

as an engineer and while I was an engineering student. Pentel pencils are amazing. I fell in love with the .7mm pencil for drawings the others for nots and miscellaneous stuff.

[@davidhorizon8401]

I love those pencils. I had three, but if you drop one with it open, you will likely not have a usable pencil anymore. The tip gets bent and then you are done. Still it is the pencil I go to, every time!

[@austios]

I have the sanding mice, Taytools set up bars, and the lefty/righty fastcap measure (I’m left handed). I for sure want to get the Microjig push blocks and the 123 blocks.

[@oldtireman4665]

Loved the list, already have over half of them and love em just like you. However, a couple of important points on several items didn’t get mentioned. I use the lefty/righty tape measure for most everything but especially love the spring belt clip and the write on white disk on the side, especially helpful when you’re the cut man and your partner is shouting measurements at you. The feature on the Pentel pencil I consider to be crucial is how the tip and the lead retract every time when you squeeze the pocket clip, protecting that vital area. And, you can snag the 4 pack with all 4 lead sizes with extra leads and erasers on line for about $40. I carry the .9 mm all the time for general work but when your want to get fine as frog hair, the .7 and .5 are just the ticket. Do hafta get one of those thin rip jigs.

[@markkempton4579]

I'm crushing on that Tudor. Beautiful watch! Love your video production! The graphic overlay during that speed square section was beautifully executed!

[@731Woodworks]

Thank you!

[@brentjenkinsdesigns]

Tay Tools has some of those wooden clamps as a kit to make your own, they have some premium upgrades as well.

[@jimrosson6702]

Thanks Matt great tips I’ve bought most of these tools from you tool reviews and tool deals you send out. Thanks for sharing.

[@kennethnuckols3185]

Thanks Matt. Always love these versions of your videos

[@JimDoubleYa]

Fastcap tapes are fantastic! I'm gonna have to get one of those pencils. ; )

[@RoseWoodWork]

I have 4 of the things you have shown of this video the sanding mouse, bench cookies, mechanical pencil and the tape measure lefty option.

[@kenerickson4923]

I just ordered flush cut saw. Hope I like it as much as you do.

[@scottbyrd2157]

I be got have the stuff in this video including the pencils. I like that tip and lead retract so you don’t break or bend it while in the apron. Yes a little pricey but I’ve kept up with these like Matt said because they are expensive. lol. Awesome recommendations Matt!

[@robertbruins894]

Thanks, you made me feel better, I noticed one of your bench cookies has a cut in it, I thought I was the only one that did that.

[@731Woodworks]

lol I've done it a few times

[@Reverend_Werewolf]

My dude, just casually showing off those deadlift calluses 👊🏼

[@731Woodworks]

👊

[@briankrueger1142]

Great selection of low cost tools!

[@bertmelendez9927]

Great video! Thanks!

[@guybowers9094]

Those are some great tools to have. I currently own a couple of them, and one being the thin rip jig that I bought after watching your video of it, and it is very nice. Although. I have a couple of push blocks from Microjig. My next purchase will be these since they do look like they would be great for the jointer.

[@Shadd0724]

Made my under $30 amazon list to share with the wife as someone 50th BD is coming up soon!! :)

[@FredD63]

Hand screw clamps and pucks are great and none marking I use them when making custom cabinets

[@jasone.knisley6218]

pencil sharpener in the tape>>>that is briliant!

[@oldtireman4665]

Not such an important feature when you’re carrying Pentel Graph Gear pencils but then you always have a sharp point!

[@dougprentice1363]

i first saw those pencils on Stumpy's channel. They are great. Even the .3 lead doesn't break.

[@coolbugfacts1234]

Agreed on the Fastcap tapes, however I like the metric True32 version since it's much better for cabinets. Most cabinets use the 32mm system and the hardware is designed for the 32mm system.

[@coolbugfacts1234]

I have the Festool LR32 jig and it makes it so much easier if everything is a multiple of 32mm

[@kenerickson4923]

I love the lefty-righty tape measure. I was about to cut countertop and read 85". However, it as 58".

[@thenedanocap7673]

Milescraft, since it's a cheaper "Kreg", they make their own version of bench cookies. They're a triangle shape and cost $2.99 each. So for 4 of them, it's $11.94. Genuine Dickies also makes their version of the Carhartt work shorts, and they're just called Utility Shorts. Only like 10 dollars cheaper though.

[@keithnewton5508]

The thumbnail with the pencil I use caught my attention. A useful accessory for the pencil is a magnetic holder that means I can attach them to my lathe, drill press etc. They can also be used for things like chuck keys and other small tools.For the hockey pucks I recommend looking for foam practice pucks. These are a high density foam that gives them a bit more grip.

[@webkitswkshop]

Nice Tudor GMT 🎉🎉🎉

[@woodrowsmith3400]

On the Pentel...there is a less expensive version that comes in two packs for the same price as the fancy one. Great pencil. Have used them for fifty years. Honestly! When I bought the fancy one, I also bought a softer lead than the #2 that comes with it. I bought *2B* leads, Pentel brand, in a twelve tube pack. Each pack holds 15 leads. I know, huh? Lifetime supply...both mine and whoever ends up grabbing the pencil when I pass. 😂 The 2B lead is roughly equivalent to a #1 pencil. Slightly darker (easier for old eyes) and slightly softer (less chance of scoring). Pentel pencils are color coded based of lead diameter. The 0.9mm pencils are yellow-ish, the 0.7mm are blue, the 0.5mm are black. Their fancy pencils use the color scheme in their finger grips and printing while the original, less expensive pencil has the whole body colored. Whichever one you choose...I have a fancy 0.7mm and 0.9mm, and multiple original bodies at my drafting table...you'll wonder why you never got them before now.

[@johnpetrea]

Awesome 👏 Video!!.. Thank You

[@731Woodworks]

Glad you liked it!

[@thezfunk]

I'll never buy a tape measure that isn't the Fastcap. I have tried a few and the Fastcap are awesome!

[@halsti99]

if you do joinery, get the incra tiny T. its great for layout

[@alans1816]

I do like the graph gear pencils, particularly the retracting tip that makes it last longer. But I wish they made one with the wider eraser of the twist-erase version. That one is a little less durable, but it fits my hand better and has a much better eraser. The graph gear appears to be stronger because of the metal cladding, but I have had the entire end break off, to see it's only plastic where it broke. So I'm returning to the twist erase, and hoping for an update with a retractable tip.

[@jane7836]

You can write in the white/green tape measure on the white part and erase it if you don’t remember your measurements 😮

[@unlistedunlisted3108]

1 2 3 blocks are also good for calibrating your tape measure and caliper.

[@arkansasboy45]

I love my Pentel pencil.

[@robotcactus_mk1882]

Let’s see some projects

[@georgemcfly8390]

Can you recommend a decent saw blade for a rigid table saw that will cut Melanie good without chipping? Thank you

[@ronstarner1103]

Please explane tape hook moving purpose

[@blayne2029]

Pentel pencil is really nice but they don't last. Had a couple and eventually they stop retracting the lead.

[@cfchouston08]

“Number 1 in the list with no particular order” 😂

[@rjdavis947]

Extremely representative

[@billynomates920]

was that an edit with the mini square? the no pocket pocket thing?

[@731Woodworks]

lol yeah

[@danielmoore2065]

@@731Woodworks I thought I was going crazy.

[@vaidotakas]

I would like to buy many of these tools and especially because I am a fan of American quality but I only visit America from time to time, could you tell me in which stores I can purchase them the next time I am in the USA?

[@stephenbru]

I just started making art and crafts out of wood and I am looking for a mini table saw that can cut through dowels, and other small wood pieces like popsicle sticks, bamboo strips..something that can cut through 1/4 to 1/2 inches..I don't really need a full size table saw but a saw that would be powerful enough to get the job done..I appreciate your help to anyone reading this.. and God Bless...

[@731Woodworks]

I would get a small bandsaw for that use

[@thenedanocap7673]

Tip: if you don't have an eraser, use the rubber from your tape measure.

[@lemuero]

Bought all those tools on temu for like 10 bucks total 😂 decent quality too

[@nonplayablecharacter4815]

Do you buy with your personal credit or debit card? I want to buy off temu as well I’m just very apprehensive about using my personal bank account

[@couz10]

The pencisl .7 and .5 are great when woodworking…

[@p8ntblr1]

When demo ing the setup blocks you set them up against the body of the blade. They should really be set up against the carbide teeth.

[@adamshinbrot]

With all due respect the Uni Kurutoga pencil at Amazon beats that Pentel one all hollow. The basic problem with mechanical pencils is you need a certain amount of lead exposed to write, but too much will break off, and it's very hard to maintain a happy medium. I've fought this battle for years, until I found the Kurotoga. The thing that makes it special is that it automatically advances the lead for you as you write. Enough to write with; not enough to break off. I'm telling you, check this thing out. You won't be sorry. P.S. There are cheaper versions of self-advancing pencils; Ticonderoga makes one; I have these also and don't like them nearly as much.

[@glennchaffin8446]

Those Pentel pencils are no joke. I also have the 7mm and the 9mm and I use them both all the time. We all buy stuff for the shop we think we need and then find out later that we probably didn't need it after all. That's not the case with this list. Everything here is very useful and most of all, affordable. Great Video. P.S. Nice watch 😁

[@TheANDROIDDAB]

I knew I would like this list when I actually already owned the first tool lol.

[@GrantButler]

I have the TrueWerk XP pants. The padded knee is so awesome for my day job! However, do you have issues with your pen catching in the embroidery on the pen pocket too? It drives me a little nuts

[@731Woodworks]

Naw, never had it catch that. But I'm only using the Graphgear pencil in there.

[@mattbridges4338]

My problem is all the men in my family have Noassatall Disease. Put much weight in your pockets and even with a belt you're fighting saggy britches 😂

[@GrantButler]

@mattbridges4338 when I was in construction, suspenders were my best friend! 😅

[@markgibbins2805]

The link for the Igaging squares takes you to the wrong squares wo the pins. Just FYI❤

[@731Woodworks]

Thanks. Updated links.

[@glennryzebol4472]

Gotta say, I don't get the draw on that pencil. Thought i would like it but it's just not all that hot. the lead is a pain to swap out and the leads don't lock in place when i advance them. Unless i'm doing something wrong, it should be a pleasure to use, and it really isn't

[@seth1371]

The small square on Amazon is over 30$ not by much but still over 30$.

[@GrantButler]

I've had KZbin Premium for YEARS! I LOVE IT! No ads is the best, and I almost exclusively watch downloaded videos. Never have to worry about bad internet connections. 10/10 I recommend.

[@Benmeglei1]

I’m right there with you my brother. I’ve had premium for 7-8 years. I couldn’t imagine watching with commercials. That being said they have been raising the price. Pisses me off but it is what it is.

[@rulowth4815]

Same

[@a9ball1]

I have the family version so that the 3 of us can enjoy ad free watching.

[@GokouZWAR]

Same here. Course I leech my son’s premium since he has it and I’m on family with him. I forgot KZbin had ads until I forgot to log in on the web once… I was like “wait… ads? Whaaaat?”

[@deanmc]

I tried premium 2018 or 2019, not sure... I can't imagine going back to interruptions. KZbin premium is underrated. I'm technically inclined to install ad blockers, however premium is without a doubt the best

[@Jasonnj732]

How come everything on KZbin is a “game changer” or the “ultimate”??? What about the Ultimate Game Changer??

[@731Woodworks]

good idea!

[@lemuero]

Plz quit the internet then if you can't handle ultimate

[@Jasonnj732]

@@lemuero That is the ultimate comment!! I see you.

[@brians6458]

99% of woodworkers can relate!!

[@Unbendable74]

So is square angle inaccuracy common or something? Seems like every time someone talks about a square they mention the angle accuracy. I mean that’s the main purpose of a square so one would think it would be accurate lol. Are the Swanson or Johnson squares not accurate??

[@ronvance1958]

I call mine Uncle Fester Clamps

[@flfbsphatboyblue8970]

Have you ever worked with metric measurements? No working out silly fractions. Everything is based on tens. No fractions, just decimal points.

[@erichaskell]

Nice Rolex.

[@731Woodworks]

Thanks, but it's not a Rolex, it's a Tudor

[@marcorock101]

Pretty sure we've seen this video years ago 🤔

[@731Woodworks]

nope, just filmed this one a couple weeks ago. But these are my "favorite" tools under $30 as stated in the intro, which means I've shown most of these before at some point.

[@marcorock101]

@@731Woodworks I may have misspoken. Yes, that's what I've meant, that we've seen them in previous videos

[@tobiramasenju4316]

​@@marcorock101 why complain about free GOOD advice

[@Citadel1974]

11:53 Lee-Valley has grips you can stick on to the hockey pucks. A pack of 8 is $8.70 CAD. If you're near a hockey rink? Send your kids to go get the pucks that went over the glass for free pucks 😉

[@beetleclemens3727]

🤩🤩🤩🤩🤔🤔🤔🤔🤔

[@brentjenkinsdesigns]

Premium subscriber here. I have been since the original name which was KZbin Red. Not Redtube. Gutter minds. 🙃

[@DIYHGP]

Matt, when you’re demonstrating, the flush cut saw. Please do it correctly. You hold the piece, not the off-cut, because you’re binding it.

[@CountDabulaTV]

1:51 New shirt idea

[@GokouZWAR]

And you keep my sub for being a preds fan… 👍🏻

[@731Woodworks]

👊

[@danielklatt5394]

Are you still LEO or retired?

[@731Woodworks]

I resigned in 2021 to go full time on KZbin

[@danielklatt5394]

@@731Woodworks awsome! Current sheriff of carroll co.

[@MarkSWilliams27]

Despite the terrible, hard to listen to Southern accent --- it's TEN, not TI-IIn...........OK video.

[@731Woodworks]

You're just mad you ain't got that sweet southern drawl 😂

[@ramonsolis3967]

Hi my son is in the boys scouts and is doing the merit badge for woodworking and needs to talk to a carpenter or cabinet maker if anyone is available to answer a couple questions through email that would help him a lot thank you

[@731Woodworks]

he can contact me through my website using the contact form 731woodworks.com

[@tomowens2720]

Rocker bench cookies will cost you twice as much as you quoted. Rockler is infamous for their excessive shipping costs. So combine this with tax and the item price and it’ll be $40. Gripper products do not offer replacement pads so when they get chewed up you end up chucking a giant piece of plastic into the land fill. I’m not knocking this products for the sake of doing so I am speaking from personal experience

[@731Woodworks]

Free shipping from Amazon 🤷🏻‍♂️