You’re still not dead? I figure that banshee was gonna kill you within 2 weeks. You must be a good rider.
@banshee1006 жыл бұрын
Jeremy Brown yea pretty good been riding fast stuff since 8 years old,when I had a 250r
@jerrythechainsawguy81006 жыл бұрын
Hey, it shows. I have rode a few banshees in my day. Some modified ones etc. if I could get enough seat time in, I know I wouldn’t be afraid of them. It looks like you put in the time, you can predict what it does. Kudos to you. I just **** my pants when they lose traction in 3rd or 4th.
@banshee1006 жыл бұрын
Jeremy Brown did you watch the other vid on the pavement? When it hooks
@kevinAuman16 жыл бұрын
hellcat channel one badass vidya I'd have to say haha
@banshee1006 жыл бұрын
Thanks man
@spliffsperlunk5 жыл бұрын
Three of the coolest ATVs ever made imo: Banshee 350 , TRX 250R, Suzuki Quadzilla 500
@banshee1005 жыл бұрын
Yes sir
@johnsmith-oh2xo4 жыл бұрын
Your forgetting the first 2 stroke four wheeler the suzuki lt250r great quads..................
@MrATOMBOMB4204 жыл бұрын
And I have two of those best ones a nasty 250R and nasty 421 banshee
@MrATOMBOMB4204 жыл бұрын
And I just got rid of lt250r done to the nuts
@droski336 жыл бұрын
These vids make me want to buy a banshee again. She's a beast dude.
@Jordan-hl5hj5 жыл бұрын
That 4 Wheeler is awesome. Because of your videos I got my 98 banshee in the shop right now getting the same motor built
@banshee1005 жыл бұрын
who building it man
@MrGolddenboy4 жыл бұрын
Whatch it thanks for the video. One hell of a quad . Be safe. I love how you were on a wheelie 2 3 4 5 gear and the power band is amazing on that monster.
@jesseredie6 жыл бұрын
Sir you have by far the nicest banshee!! I had a 1997 red an yellow. Mildly built had the crank an beefier top end. But I too left An went to a 4 stroke. Been missing it ever since. Awesome bike!!
@banshee1006 жыл бұрын
Jesse Edie thanks man
@banshee1006 жыл бұрын
thanks ,
@patrickbarnes26865 жыл бұрын
The stock crank will start to separate, always replace with a welded and trued one
@banshee1005 жыл бұрын
watch my other video 100hp banshee break down
@Jampony445 жыл бұрын
Bro you are my new hero, love the banshee lots of power that's actually the same kit i'm going with 💪🏽💯
@banshee1005 жыл бұрын
nice man thanks
@Jampony445 жыл бұрын
subscribed to your channel, if I have any questions in the future do you mind me asking?
@banshee1005 жыл бұрын
ask away
@Robboned6 жыл бұрын
I have a nice '06-model Banshee I bought almost 13 years ago in the fall of '05 & it's still never-fired or fueled either, built by Yamaha;)...if I ever decide to uncover it I will surely build it as you did yours.
@banshee1006 жыл бұрын
Robboned nice
@paulpz046 жыл бұрын
representing Georgia, my man!!...I'm so glad you made this video cause it answered all I wanted to know...I have an '04 now, used to have an '01 I shouldve never got rid of but so far on the new one just vforce4, t5s, wiseco full perf clutch with basket and I just broke the eccentric bolt the other day so I think I might just let the company u mentioned take care of all that for me lol
@MrRingo21114 жыл бұрын
Very nice banshee bud. I just picked up a 99 banshee for a pretty good price. I live in Lebanon Oregon and I took mine to redline racing in sweethome Oregon. He's a banshee genius!! Really good dude!
@banshee1004 жыл бұрын
Yeah he's the guy that did the Pro Mod in my transmission
@MrRingo21114 жыл бұрын
@@banshee100 Hell of a guy! He should have mine done this week.
@shaney31166 жыл бұрын
Awesome bike. Bulldawg fan here from Athens !
@sammyboswelldirtybrc75806 жыл бұрын
that thang is a beast I ride a banshee myself have owned mine since 99 bought it brand new off the show room floor love it would love to put the same build u have on yours on mine it's a sweet bike man
@justinm61106 жыл бұрын
That bike is sick as hell daam man
@dustin13456 жыл бұрын
Love built 2 strokes what ever they may be waiting on my 85 atc 250r its getting esr 350pv cylinder 4 mill crank 41mm pwk ...Nice branche btw really clean and love the 6th gear wheelies man 👌
@MrTheHillfolk6 жыл бұрын
dustin bachmeier 250R Mmmmmm nice , thanks for the memories of those.
@michaelpipkin26602 жыл бұрын
Absolutely love the sleeper look. 421 is a bad boy.
@banshee1002 жыл бұрын
yes sir
@evanwilliams26026 жыл бұрын
Love your videos.wish to see some of your drag racing
@jeromehoward27836 жыл бұрын
Great bike bubba im subscribing now keep it up
@raymccormick62856 жыл бұрын
Should always let us hear it sing a tone in every video... Subbed!
@horsegirl1866 Жыл бұрын
The fastest, cleanest, coolest, 'shee I've laid eyes on.
@banshee100 Жыл бұрын
You mean me hun??
@chrisfrane9736 жыл бұрын
Nice bike. I ride mine with my wife and daughter on wi state trails. Gotta keep it stock and quiet. Ugh. But its still fast as a banshee💪😁👍
@jessehall76546 жыл бұрын
Good job on this video ...we love banshees
@banshee1006 жыл бұрын
Jesse Hall thanks buddy appreciate the comment
@bzly904grizzlymood76 жыл бұрын
Dude Cascade Innovation ROCKS'! That is A mean MF'en machine! I have that set up minus the pipes & Trans, but now that you suggested Redline that'll be my next step. Thanks and Keep killing that #SHEEETHANG
@banshee1006 жыл бұрын
thanks man
@dannyprater76874 жыл бұрын
VP banner is bad ass! Your bike is just ungodly!
@STILLNIGHTPEARL6 жыл бұрын
I have just about the same setup except I’m running 39mm pwks on race gas and a +8 swingarm which I recommend all day. Can’t go wrong with a 4mm cub, best bang for your buck.
@banshee1006 жыл бұрын
Alfred Hernandez yes it is man
@fuckgoogle87976 жыл бұрын
NOT ot be getting into your personal business, but how much did that engine work/parts end up causting you?
@chrisheath2846 жыл бұрын
I love the bike, I like how Stock it looks. I love the doubters. 300’ dirt drag guys have monster 1800 cc triple cylinder motors. Those are purposely built to do 1 thing, yours looks like a lot of fun. Props on the Pro build + Dyno Tune. The bike should be reliable. Lots of 100 horse bikes, not a lot that arnt stretched, slammed and on the raw edge of going full grenade mode. Check out the “King of the River” guys from Oklahoma. They have some nasty bikes and ride hard.
@banshee1006 жыл бұрын
Thanks man I've seen the king of river run there fast
@hank15565 жыл бұрын
+1 on the stock look! I HATE the billet, chrome everything, lowered and stretched and cut to hell fenders with tiny healights and candy paint. ugh... so ugly and its really popular nerf bars, bark busters, stock stance is about all you need. best look
@bdogjr77795 жыл бұрын
Awesome H《☆》Good choice by having a shop build it. They know what it takes to make reliable power. The red clay hills of Georgia look as good as I remember 🤠☻🤠
@kingdezines4 жыл бұрын
Cascade Innovations is now Top Dog Racing. They do good work, they've done mine and all my friends Banshees ranging from a 4mill, to 10mill builds.
@banshee1004 жыл бұрын
What clutch side gear your running and bearing?
@kingdezines4 жыл бұрын
@@banshee100 I cant even remember what clutch is in mine. It was done in the early 2ks from Cascade. Ill ask my buddy what hes runnin. He just got his 8mill rebuilt with the override trans.
@ericmacnichol37914 жыл бұрын
Love your banshee, its awsome...
@banshee1004 жыл бұрын
Thanks brother
@ericmacnichol37914 жыл бұрын
@@banshee100 no problem.
@kevinAuman16 жыл бұрын
Man, I thought my .30 over bolt on quadzilla was nasty (which it used to run like this but shes due a rebuild) that's a little handful of fun looks like haha stay safe brother!
@MrTheHillfolk6 жыл бұрын
kevin auman My buddy had one of those back in the day. What a beast!! His was a little knackered because something was up with the governor assembly or whatever the hell that thing is that operates the power valve. So it was a gamble if it would work or not when ya needed it. When it wanted to work, whooo hoooo hang on!!
@kennethkrajewski94436 жыл бұрын
quadzilla is the nastiest of all. beat so many quads! loved mine and I think I need to try this 100 hp beast out. seems like there's 200 more engine builders for the banshee in the country
@danielbell54876 жыл бұрын
Respect from UK
@dalebennett10426 жыл бұрын
If ya don't mind what was the total cost for the engine?
@michaelviens28946 жыл бұрын
Banshee brothers you got 50 hp on me
@mike3004066 жыл бұрын
LUV them 2 stroke twin yamaha's 350 cc or 250 cc both great engine's
@stevewombles75674 жыл бұрын
Guys where can I get a good set of glow plugs an a flux capacitor for a banshee
@ryantaylor63426 жыл бұрын
Dude love ure Banshee , but please just tell us what's done to it before I fall asleep
@KanadaVCK6 жыл бұрын
rude
@roguepowersports35765 жыл бұрын
Damnit man I really like your shee. I've been looking for one to restore/build for a long time. Cant find anything around me that people dont want WAY too much money for that aren't already fooled with. I want to do one the way I want it not redo something someone bolted crap to thinking it's worth more than it is.
@banshee1005 жыл бұрын
Yeah cracks me up and pickles got stock banshees in the ask 5000-6000 for that's just retarded
@roguepowersports35765 жыл бұрын
@@banshee100 yeah bro no kidding it's insane. I'm in NJ and seems like the prices here are outrageous plus nowhere to ride without getting locked up but building my banshee (when I can find one) is on my list of need to do's.
@banshee1005 жыл бұрын
Sweet man good luck at it bro
@5dsunny7135 күн бұрын
I need this in a cross kart . We need more builds for ppl who can’t ride quads Cuz of disabilities
@th6ux6 жыл бұрын
i’m looking to get a 4 wheeler roughly $1000 and under. got any good recommendations?
@antwineprichard39436 жыл бұрын
that's a nice build
@hookedoncatchin6 жыл бұрын
I love Banshees, but i ride an 08 KFX 450R with 36t rear end, fuel management and regulating system removed and tuned, she's supposed to top out at 105 mph generously
@hookedoncatchin6 жыл бұрын
I also happen to live a few hours from Boring, I live in the valley by Corvallis
@wallaceeatman17816 жыл бұрын
That bike fast I had one the same model I sold it and got a 1000 paloris
@johnreynolds62914 жыл бұрын
Cleanest Banshee I've Ever Seen Period.
@banshee1004 жыл бұрын
Thanks john
@joegaskill87426 жыл бұрын
Bad Ass,,subscribed!
@joegaskill87426 жыл бұрын
Have you considered longer A arms and a wider axle? A friend of mine had one that was plus 2 inches I believe and although it was tight on some trails it made it so much better.
@banshee1006 жыл бұрын
Yes I have but I'm happy with it for now
@modsquad88176 жыл бұрын
Hell yeah man. Maybe one day will meet and you can meet the banshee killers lol. She’s beautiful. I built both my drag toys. One has been on a Dino. Esr done the ports on both tho.
@250R4life6 жыл бұрын
Mod Squad that banshee will eat that R
@250R4life6 жыл бұрын
Mod Squad what size engine
@banshee1006 жыл бұрын
250r are nice had one and I. Called ct racing and he said the badest I can build is 75 whp
@banshee1006 жыл бұрын
So I went with a banshee more power
@250R4life6 жыл бұрын
hellcat channel well idk about that one I’m a R person only reason I said that too him because who he said ported his engine but you would be very surprise what a trx431 puma kit from LED performance will do😁
@BTR20185 жыл бұрын
Love the video, can’t imagine how fast she is:) I’m trying to build a banshee on my channel and can’t decide which route to go? Should I bore stock cylinder cuz there scarred and port and polish them?, or should I go with a kit off of eBay? Money is not the problem I just don’t want to build a drag quad, and nothing to crazy. I wonder how those aftermarket cylinders are?
@banshee1005 жыл бұрын
Fix your stock cylinders
@BTR20185 жыл бұрын
hellcat channel: should I port and polish them? What kind of pistons should I use? Wiseco?
@banshee1005 жыл бұрын
Yes wisco
@banshee1005 жыл бұрын
Just fix them and ride
@BTR20185 жыл бұрын
Awesome I’ll probably do that.
@bernardfournier46106 жыл бұрын
I know what mine was and I had a Full drag port with a Tentmill cub and I was 138 Out of frame big bore sheer drag pipes
@banshee1006 жыл бұрын
bernard fournier did you see my dyno sheet
@stsdoe8205 жыл бұрын
Cool I got the same setup as your bike except I got to stock transmission and I got cpi's button trying to pop wheelies in 4th gear everything else ported engine ported because Brandon Wiseco 68 I'm just trying to pull wheelies in 4th gear
@banshee1005 жыл бұрын
news for me and you both mines not reliable man hit started missing on a cylinder yesterday when it was cold so it's down at the moment
@stsdoe8206 жыл бұрын
Hey I was wondering what size domes are you running in that cool head
@banshee1006 жыл бұрын
sts Doe 20cc
@HotRodHabits6 жыл бұрын
Build a blaster I want to see what you could do to one of those
@johncardoza26525 жыл бұрын
Yea that is a nice build for sure u have a bad ass bike but i was just wondering is there any 421 kits that u can run on pump gas
@banshee1005 жыл бұрын
Yes blue bike is a 421 serval pump gas
@easttnlawncare67404 жыл бұрын
It will run thats four sure
@catlincarrell1655 жыл бұрын
Nice shee Sir.
@banshee1005 жыл бұрын
Thanks
@bhdunphy4 жыл бұрын
Awesome banshee, what gear ratio are you using, and what needle did you say was in it? I have a 421 serval that makes 90 hp and doesn't pull the wheels like this one, the powerband just feels like a light switch and spins the tires
@banshee1004 жыл бұрын
Cel needle how does yours do on the pavement
@banshee1004 жыл бұрын
Also 15 40 sometimes stock gearing
@bhdunphy4 жыл бұрын
It still spins on pavement, I'm running a cel needle and 15-40 gearing as well. Only difference is I have 38mm carbs
@Mac181 Жыл бұрын
I’d make sure to have some real sticky grips that thing must want to throw ya off every gear
@AutoRolo6 жыл бұрын
Dam things a horse great bike I’m working on mins right now getting ready to slam a cheetah cub in it can’t wait to ride it
@banshee1006 жыл бұрын
Auto Rolo there dun man
@fast2valve5596 жыл бұрын
mines the exact build except i didnt opt for the 4mil crank. mines a 392 cub and its pretty nasty itself
@banshee1006 жыл бұрын
FAST2VALVE nice
@viccarruthers34275 жыл бұрын
Dude ur banshee is SICK... All 2gether what do u think u got into it?
@banshee1005 жыл бұрын
7000
@tonysmith52406 жыл бұрын
It’s still Cascade I live in Oregon it’s Cascade Innovations and Top Dog raving is there too and there’s also Redline Racing
@banshee1006 жыл бұрын
Tony Smith good to know man decline did the trans
@tonysmith52406 жыл бұрын
hellcat channel yeah there both good companies my uncle had an 01 banshee that Cascade did a 4mil to, and this last Saturday I was parked next to one of the Redline guys at Winchester cause my banshee wasn’t running right so he helped me out the best he could but it just didn’t wanna fire. Cascade has been more than happy to help me if I call with a question unlike some places won’t answer they’ll just tell you bring it in and charge you.
@banshee1006 жыл бұрын
mine had the same issue andit was that stupid riĉky stator they used
@tonysmith52406 жыл бұрын
hellcat channel I just redid all the electrical did CDI Stator ignition coil and fly wheel that’s why I had it out to test it but pretty sure it’s the carbs getting too much fuel they’re worn out so just gonna do the single carb kit less to work on and I use the lower end it’ll give me for climbing anyways
@pktillidie6 жыл бұрын
Where did you get your quad dyno’d? I’m in north Alabama and can’t find anybody local to do it.
@banshee1006 жыл бұрын
Rockale Lyons it's not local it's called Currie motorsports n.c
@Profabdesigns6 жыл бұрын
Can you pls tell us all, what the final bore and stroke was, and the total cc displacement is now? Do you have the compression ratio also? Forgive me if I missed it the first time. I just got the motor out of mine, and it’s headed to Redline in 2 weeks. Thx brother.
@elimartin51055 жыл бұрын
2 strokes dont do a compression ratio and it doesnt matter bore doesnt matter none of that matters, it all in the port work that its had done\, that what really make a a fast banshee
@banshee1005 жыл бұрын
Get it done??
@TheNattyking3 жыл бұрын
I wanna here prices man !!
@stsdoe8205 жыл бұрын
Was the exact size of the domes in your bike Hellcat
@banshee1005 жыл бұрын
20cc
@countryshenanigans-nn3pb6 жыл бұрын
Could you email me the pics of the build sheet so I can build me
@banshee1006 жыл бұрын
Check my other video hundred horsepower breakdown
@Tylercolalife5 ай бұрын
The downfall of a 421 cub is that it's a topend motor. In tight trails, it would be a dog, I have a stock cylinder, a 4mill short rod, and wouldn't have anything else
@Nunya_Beezwax6 жыл бұрын
You wanna make that banshee run,.. Call Shawn Nielsen of Moka Mods
@banshee1006 жыл бұрын
He dyno tuned it lol
@banshee1006 жыл бұрын
They said stringest cast cub they seen
@Nunya_Beezwax6 жыл бұрын
Shawn is the man when it comes to banshee's 💯
@MrATOMBOMB4204 жыл бұрын
Did you do the TZ and Max load bearing upgrade
@banshee1004 жыл бұрын
Tz only
@mike3004066 жыл бұрын
Stock rz 350 has I believe 38 hp the banshee is detuned retuned whatever gotta be close to that you would think
@dr.hugog.hackenbush94435 жыл бұрын
Stock RZ is closer to 50. Also has powervalves. Good pipes get it over 50, and a lot lighter.
@chrisfrane9736 жыл бұрын
I wish. I live up here in the cold and shit wet mud. Still cold as shit here. Ugh. Dying to ride. I just got mine in march. It was in bad shape. I fixed it up oem per the wife lol. I do what i am allowed😁 a happy wife is a good life😁
@banshee1006 жыл бұрын
Chris Frane all it does is rain latley
@BackRoadGarage4 жыл бұрын
Shearer silencers? they kinda look like toomeys
@banshee1004 жыл бұрын
Shear pipes and silencers
@damonquebeans5 жыл бұрын
I'f you don't mind me asking how much total did your build cost
@shaneashford38894 жыл бұрын
He said 3k on the motor on another post
@jasonneal6 жыл бұрын
Have you ever dealt with the single carb set up? I have completely built my banshee for moto cross and heard single is the way to go
@banshee1006 жыл бұрын
jasonneal no sir single is not the way to go it completely com the powerband down I do not like it at all
@bernardfournier46106 жыл бұрын
Not sayin yours don’t run good Mine was on full Methanol 40 mill carbs Two through five override with a lock up
@shawnjerome85995 жыл бұрын
Can you tell me a good kit for a pump gas kit
@banshee1005 жыл бұрын
4 mill serval as cast
@BrendanMX3 жыл бұрын
What kind of gas do they specify that you run? C-12?
@banshee1003 жыл бұрын
Sunoco 110
@mopar_shawn9394 жыл бұрын
You should of told the price. I bet half the people asking questions would go silent lol
@shaneashford38894 жыл бұрын
He said 3k on another post
@banshee1004 жыл бұрын
Yea for motor
@adamharrington88146 жыл бұрын
how is the crankshaft holding up?
@banshee1006 жыл бұрын
good
@74superglide6 жыл бұрын
Did you say about $6,000??
@zachklippa34645 жыл бұрын
Is this build still accurate today? Nothing major changed?
@banshee1005 жыл бұрын
Same
@michaellinkous74492 жыл бұрын
Im looking for a transmission if you know of any
@tls79656 жыл бұрын
Sweet🤤
@MrATOMBOMB4204 жыл бұрын
Full pro circuit exhaust vforce 3 Reeds ported polished + 4 mm hot rods crank trued and welded with 115 mmmm rods special Vito's Banshee big bore Pistons 22 cc cool head 4 degrees advancedLonestar racing + 4 swingarm Alba + 2 steering stem Alba plus-2 1 A-Arms with predator suspension all way around triple core radiator was going to run pwk38 carbs but I think they may be just a touch too big as pwk35 seem to be the number 38 seem to lose some of your bottom end I did all the billet impeller aftermarket pancake clutch pusher Heavy duty clutch did case matching with the porting
@banshee1004 жыл бұрын
Sounds like a good ride man
@MrATOMBOMB4204 жыл бұрын
@@banshee100 any tips or things i can do to make it absolutely bulletproof reliableI'm ordering all the parts so that it's not just oh I broke this part replace this that's not working right replace that I'm looking for any pointers I've looked on Banshee HQ all tips and pointers to build a good banshee and your bike is just straight awesomehowever I think I might upgrade that stock swingarm that you got but I understand the sleeper approachsomeone pulls up since they got something that's absolutely the fastest thing on planet Earth thinking that the person they're racing has a pretty much stock machine and then all of a sudden they get ate for breakfast
@MrATOMBOMB4204 жыл бұрын
@@banshee100 better to get all the parts together build it all right the first time
@banshee1004 жыл бұрын
@@MrATOMBOMB420 just talk to your builder they will know
@MrATOMBOMB4204 жыл бұрын
@@banshee100 i am my builder I've been building motors for almost 30 years but I've never gotten into a Banshee motor
@BaldVulture876 жыл бұрын
what a beast of a machine, why the fuck did 10 ppl disliked this? they salty and jelly, that's why.
@banshee1006 жыл бұрын
Bald Vulture your correct
@5dsunny7134 жыл бұрын
I want this setup on a mini buggy ... help me out with specs ... maybe a little less..maybe 80hp serval for torque .. I watched this 3xs
@5dsunny7134 жыл бұрын
I can’t bend my leg like that .. so I rather a mini buggy/modified cart ... someone leave comments I absolutely love this bike and the rider .. the 4th year power wheelies are so epic ... just need a little more torque so a serval is more my speed 20hp makes a big difference... but it’s gonna haul ass with way .. please bro help out
@banshee1004 жыл бұрын
You need a 421 serval
@illnameitlater16606 жыл бұрын
great build whats the top speed do you know
@banshee1006 жыл бұрын
not sure
@illnameitlater16606 жыл бұрын
CryinBranston don't mean to sound like a dick but no shit dude it don't matter how its geared it has a top speed
@hank15565 жыл бұрын
probably like 200 mph
@dr33zie5 жыл бұрын
Hahahaha man I work with you.
@trailboss6954 жыл бұрын
What kind of exhaust you got
@banshee1004 жыл бұрын
Shears
@rukus136 жыл бұрын
Not to be nosy, but can you give a rounded number on the price of motor work done and the total price of everything including bike price (rounded of course). Meaning if you did sell the bike what would be the asking price. Ballpark. Not that I’m poor or anything, but not rich either lol.
@banshee1006 жыл бұрын
6500.00
@banshee1005 жыл бұрын
I may send me your number email to srt-4matt@hotmail.com
@dennisswint996 жыл бұрын
You from Tennessee?
@shaneashford38894 жыл бұрын
Do they offer the cub kit for the blaster platform?
@banshee1004 жыл бұрын
No
@shaneashford38894 жыл бұрын
@@banshee100 well that sucks.you figure they would ,I mean the blaster is like the younger annoying little brother of the banshee. I just blew the top end on mine and wanna up the hp some. I'll
@MrATOMBOMB4204 жыл бұрын
I have a 2005 banshee
@dr33zie5 жыл бұрын
Coke reset in knox lol small world. Nice bike
@banshee1005 жыл бұрын
Oh yea lol
@DjChrisChip5 жыл бұрын
Why did you say you wish you never got the 4 stroke quad? Which one did you get?
@banshee1005 жыл бұрын
Yes 450 they blow up all the time
@DjChrisChip5 жыл бұрын
@@banshee100 thanks for the answer back. I am deciding on my first quad between banshee and yfz450 for simple trail riding and occasional track use.
@banshee1005 жыл бұрын
Yfz for track only
@DjChrisChip5 жыл бұрын
@@banshee100 thanks love your content. Reach out to michael sabo on KZbin. He is doing a trail build banshee with a 421. Think you could help him. He is from philly.
@cannabiscarpenter616 жыл бұрын
What pipes are you running? Looking to get a new set of pipes
@banshee1006 жыл бұрын
Shear drag pipes
@cannabiscarpenter616 жыл бұрын
Inframe?
@banshee1006 жыл бұрын
Yes sir
@treyivey54315 жыл бұрын
sprocket sizes?
@banshee1005 жыл бұрын
Stock or 15 on front
@MrATOMBOMB4204 жыл бұрын
I have the 421 assassin
@realstakes1015 жыл бұрын
Around what the build cost?
@banshee1005 жыл бұрын
4500
@masonlong79446 жыл бұрын
I'm looking for a banshee if anybody knows one is let me know