100 RISER PADS STUPID SKATE

[@dylan_was_taken]

That kickflip was cleeaaaaan, great job team! 90/100 riser pads, Mr Cruz!

[@brailleskateboarding]

hahaha

[@P4nikStudios]

Toe Drag

[@michaelkrauer1286]

@@P4nikStudioslol. How?

[@bradynielson8123]

wrong, there was 100 riser pads duhhh look at the title

[@DrCoconuttt]

@@P4nikStudiosAINT NO WAY YOU SAID THIS😭😭😂😂😂😭

[@seanbeall9182]

That kickflip was truly a feat of skill!👏

[@zeppelin695]

I saw this comment prior to watching the whole video and I thought you were trolling 😧😧

[@draw4yourlife3]

I read this comment before watching the vid thinking they told someone to make a troll comment about how great a kickflip was, even though it never happened.. was such a sick kick flip!

[@ghost_615]

Au contraire...it was truly a skill of feet.

[@yahwehisdead]

Yea....WOW!!!

[@seanbeall9182]

@@ghost_615 👏

[@user-pw7xy2sm8i]

That was probably the most impressive kickflip we've had

[@roycemark]

When cutting a threaded rod, you can put the nut on the rod below where you want to cut it. That way, you can spin the nut off and it will straighten out the crooked threads from the cut.

[@Kozycz]

Once I saw him start cutting I yelled at my phone, “gotta put the nut on first to back cut the treads”. It was an instinct response trying to prevent a problem that I would normally have to fix, even though I had no obligation or way to fix this one.

[@bermchasin]

also - you can file down the edges of the thread at the tip and it usually will smooth it out.

[@Iwwe9]

Also - also you can use the grinder the right way around so the sparks aren’t flying up at you. And maybe put the crocks in sport.

[@seanelgie]

You can also snap the top 1/2 thread off with a pair of Channel-locks (pump pliers) in 2 seconds. Clean thread every time.

[@mattlaclair306]

Or you can just fckn send it

[@Apr0x1m0]

Gab, that was 100/100 riser pads! When I saw the thumbnail I thought maybe a shuv, but not much else and never a kickflip. Then Rick comes with perfect flick! Well played Sir

[@quinnfoster1234]

Like shoc board systems?

[@CFD290]

I love watching you guys. A team thats not just focused on big tricks. You guys keep skating fun like it should be. Its amazing how much talent you guys have to be able to skate anything with wheels. Great video guys.

[@t-dogg_the_realist5304]

You can’t hurt me with that…I got safety glasses on😂 0:22

[@Late20sSkateboarder]

Ricky is such a beast!!

[@brailleskateboarding]

he truly is! So glad his knee healed and he is able to keep skating at this level.

[@spigetts]

A pogo board would be so great to see. Built with springs under trucks I've always thought it would be interesting to see

[@thepuppetmaster9813]

So, like a suspension trucks?

[@spigetts]

Yes, but bouncy!

[@bermchasin]

pretty sure suspension trucks are already a thing

[@spigetts]

Yeah? You can bounce a foot high or so without olling? I have never skated suspension trucks or noticed they exist! Sounds fun!

[@TomsThriftyLife]

Just started a couple months ago(41) and I can't stop. I love it. Just wish I had started earlier.

[@Corntron5000]

You should do a 40 riser pad full park game of skate. 20 on each side. That seems like a more reasonable, yet still difficult, crazy board to play on.

[@storkbreath]

I've made some wacky boards before. I made one with a swing arm suspension in the back and flex in the front and I've made a couple with three wheels and a couple with two wheels and all kinds of things. What I found is counterintuitively lifting the trucks up off the deck a couple inches like 3 in not 20 reduces speed wobbles quite a bit.

[@justanotherpxrson]

This looks so scary, but that was incredible lol. well done fellas.

[@brailleskateboarding]

thanks

[@maddoxmarli2860]

Every customisation you do to a board is even crazier than the last you give a new meaning to skateboarding

[@AFutureOnlineYT]

1 out of 100 riser pads.. Plus an additional 99 more riser pads... That was just insane!!! That kickflip.. Ricky is like an engineer in skateboarding.

[@Adam-M-]

Wider trucks might work even better. Since you're higher up, the extra width would provide stability.

[@bermchasin]

tru, but penny board trucks on it would also be interesting

[@nonprofet]

why does the board sound like a wallmart board after the upgrade? great vid

[@justinellis2936]

The trick to cutting a threaded rod is once the cut is made you have to take the side of the blade and kind of buff the edges of the cut. It will Make it so you can catch the threads easier with the nut

[@TreyStylesPro]

how you landed that kickflip was insane Ricky

[@Yokai456]

98/100 riser pads. Great build Gabe 🤘

[@brailleskateboarding]

thanks

[@wulfrickackerman9453]

A little tipp for cutting these metal rods, use a small file and deburr the end that you cut inwards. Towards the center of the rod. That way it will allow the nut to go over it easily.

[@TheBlakeEverhart]

that kickflip is honestly incredible, well done

[@NoTweakZone]

This reminds me of the time I took the knuckles from 3 sets of Gullwing sidewinders and put them on one set. The longer the screw the more the bend. They have mountain risers.

[@vincentdegregorio2077]

When cutting something with threads there’s a trick if you put a nut on first and cut past where the nut is and after you cut when you back the nut off it will align the threads so the nut goes on easier at the end

[@mizquitl]

This video proves that Ricky can skate anything!

[@jarredtremain4644]

Ricky's a AUSSIE LEGEND!

[@NeedWantBuy]

Genuinely impressed by that kickflip! Solid 95 riser pads.

[@Roxus1]

Rick landed 5050 and kickflip , we need 100 riser pads each next

[@Kujawa117]

That 50-50 is actually unbelievable HOLYYYY

[@jayeffsixteen]

u guys at braille really know how to get a rise out of us

[@brailleskateboarding]

hahahaha

[@Agapelovestudio]

Ricky Ricky Ricky watch the knee homie but absolutely epic

[@TheDavidCBrown]

You need to cut the all thread with the nut on there so you can thread it off to take off the burr from the cut Gabe.

[@connorrekdahl3754]

What you should have done for cutting the long bolts, is to already have the nut on there and maybe those upside down since they have the plastic and you don’t want to damage those but if you thread it off it will make the threads work right so you don’t have to try to fit it on which most of the time won’t work without putting a bevel around the outsides but you got lucky

[@wookfoot8408]

I wear a size 16 shoe so I had to use like 2&1/2 - 3 inches of riser to keep my toes/heels from touching the ground whilst carving hills

[@MyCoolBrett]

Rikki can literally kickflip ANYTHING

[@VinnytotheK]

100/100 riser pads, that kickflip was the cherry on top. You guys are insane!

[@NOYZWAV]

I thought for sure that kickflip wasn’t happening… Sooo impressive! Killed it!

[@SoapworthyProductions]

Most insane kickflip I’ve ever seen!! Ricky is _THE MAN_

[@SPINNINGMYWHEELS777]

- it's a real mental trick with that one I was 50/50 it would fold as soon as you stood on it !! ... those risers saved the day with the cross bracing on each one it does have a great effect

[@ghost_615]

That build was incredible, Gabe. 100/100 for me. But it begs the question how many riser pads can you stack before it's unskateable? Is a "stiltsboard" possible? For science!

[@donnytucker]

I can't believe that worked so well and ricky ice kickflipped on it haha.

[@echoedvoidd]

How are you guys so unintentionally funny 😭

[@flipbookboi3856]

☠️☠️☠️ Fr bru 😭

[@windolite]

This channel died years ago

[@Nandofrmdabando23]

Who said it was unintentional

[@basedbro2578]

@@windolitenah they alive and thrivin

[@brailleskateboarding]

Hahahah it is a mix of intentional and unintentional

[@TheRanguna]

What if you have a normal board without pads, and add the pads on top of the board with another board on top? Then maybe you'd be able to raise it off the ground more easily, because the bottom board kicks the ground.

[@Legend_of_Rick_G]

Truly amazing to see that kickflip!

[@theartoframshackle]

Have you guys done trucks with super long axles yet??!?

[@lui5gif]

In case nobody said this yet, if you put the nut in the screw before cutting, when you unscrew it, it recuts/realigns the threads. Just a tip for future projects

[@murder5000]

Screw the nut onto the thread before you cut so after you cut you can run the bolt over the thread and make it smooth again.

[@ninjapenguin3035]

5:34 a real work of art, amazing build as always

[@viktor_murcy]

that kickflip defied physics dawg whaaaat

[@NickDusting]

I remember doing something like this waaaaay back with thick risers - rolling in to a bowl. Keep it and take it to Woodward....

[@shalabazertheboltstruck8645]

Best build ever!!! Unbelievable!! Dareks first kickflip board hahaha but honestly this was a blast. You guys are on fire lately

[@jazzqueen1]

this is crazy skating idea on riser pads Braille

[@ninjapenguin3035]

I absolutely love the way you guys stay so creative, amazing video idea and amazing video as always braille. Love you guys ❤

[@lunartigersora4690]

the way you looked on that board at first is how I felt my board was like when I put my Indy Hi's on my Qwik Truks with 54mm dragons, felt like death. overall rating 89/100 riser pads bud, it was built pretty solid for what it was

[@Tokey_The_Bear]

You always put a nut on first before you cut allthread and use the nut to chase the threads backwards.

[@Dice67]

Ricky’s shins very relatable 😂

[@shaunbebbington6411]

It was often common to have three riser pads in the late 1980s as I recall, 3x1/8" or there abouts.

[@BigMobe]

You get chatter with a counter counter sink if you press hard and go with a slower RPM.

[@kylespevak6781]

100/109 riser pads! It seems in-tact, so maybe a follow up episode?

[@johngraham1777]

Gabe, next time thread the nut on next to where you are going to cut it. That way when you take the nut back off it will clean the threads up versus trying to fight it back on 👍🏼

[@zachdavis5426]

Homie in the supremes got the most wack fit y'all should tell him how goofy he looks😔 genuinely feel bad for the guy

[@LevelUpDaily434]

My brain doesn't understand how Ricky kickflipped that thing .. makes no sense lol insane to see.

[@Loporis]

I have to wonder if you could maybe reinforce it by putting superglue between every layer as well?

[@OGbqze]

Put the nut on first, then cut, then remove nut and it will clean up the threads.

[@hotdogwaterdad8311]

Gotta bring this thing to the skate park

[@TomaszNowak90]

My advice when cutting rods- put the nut first and after cut unscrew the nut through the cutting edge.

[@Paedrick]

Take the threaded bolt you just cut and spin the edge, like rolling a pencil in your fingers, against the flat side of the angle grinder. It will round out a cut that won't thread so that you don't have to cut it again

[@jannickliche7080]

Glo’s Carlos Santana shirt is buzzin!

[@ImAFKexe]

you should totally try something with cork riser pads

[@kylespevak6781]

Doing a flip trick on that seems impossible, but i just saw it 😮

[@alexcutie49]

✨96.5/100!! ✨ Gabe you have fully turned into a mad scientist. And Rick, that flip was smooth like butta

[@Thisismytime640]

I just wanna say skate videos by Brazil not like this but like game of skate is what got me into skateboarding

[@JayRedmond-s1q]

Need to put the All-Terrain wheels on the back with the tiny wheels in front, with risers to balance it level

[@oscarguzman3017]

That was honestly magical

[@tiahnabailey855]

That kickflip was fire 🔥. I have a video idea, the centipede skateboard, have as many trucks as you can in a line on the skateboard. Or upside down skateboard where the griptape is on the same side as the trucks. Have a great day

[@chrisricetopher21]

Haven’t finished the video yet, but I’m hoping to see a hippie jump intersecting THROUGH this board as it’s rolling past. Would be epic. Rick’s name is written all over that trick.

[@PaulSamolyk]

If you added a brace down low to connect the trucks… even another board

[@Sure2Skate]

Can't belive that Ricky shuved, 5050 and kickfliped that thing lol 😅😅 Well donne!

[@mikkelnyhuus9173]

I wish the whole gang was here for that, really fun idea. Possible sequel, yes yes?

[@puppet3668]

Gabe is a genius

[@brailleskateboarding]

Agreed

[@yuiwaileung]

When you keep getting called out for toe-touch in games of skate.

[@JPJPJP98]

Bro there’s no way I’d ever expecting this thing to get kickfliped

[@lestalkmorebasss]

Tradesman here….. if you put the nuts on the rod before cutting it then the threads can be fixed by just unscrewing the nuts off with a wrench

[@Braysonvassar]

Safety glasses but cutting metal in crocs 😂😂😂 come one man. All jokes love the videos

[@Slimbo-Slice]

That was awesome! Build it again but better!

[@ricksavage7]

That was amazing Gabe

[@michaeltimcisko7828]

Next time you cut threaded metal put the nut on first and cut the extra off. Then when you take the nut off it will fix the damaged thread

[@Delicroix]

Why are some videos shot in 4K and others aren't? Is the extra overhead not worth it?

[@brailleskateboarding]

We have two different cameras, the Sony is 4k. Sometimes we use the Canon which is not so we can use a different lens

[@StephenBurgess4845]

Braille hoodie looks great

[@josephsandy3689]

Put the nut on before you cut the threaded bar then you can cleen the thread off when you back the nut out

[@WomackKP]

What if super stiff springs were on each bolt? Would that take impact from the braille drop?

[@paulthomson5918]

Soapy floor power slide to board slid the flat rail.

[@markel6969]

If you put a second board right above the trucks and below the risers you could pop tricks Mr. Bean style!

[@himebaughchris4026]

Need some Ricky Glaser All Terrain wheels on that. 😁

[@thazsar]

Should've left the nut on the bolt before cutting. Then unscrew the nut afterwards. Makes it easier to 're-thread' the bolt

[@0megaturb0gaming404]

do a double DECKer , recipe- trucks deck 50 riser pads then another deck, like a bunk bed, i feel like it would have better the structural integrity

[@hemidart7]

If your taller than your width you will definitely have problems but if you keep it under the axle width might be do-able try just 10

[@timothyquinn4919]

We missed a chance to break out the All terrain wheels.

[@manhole7780]

you should have j.d go on the vert ramp with it

[@chaosreaper9255]

That's probably more dangerous than the sharp boards