10HP Mini Quad THRASH + Top Speed Test!

[@tomframeli8579]

Stretch it about 2 1/2 feet, widen the rear end and put a little larger sand tires on it. Also, at least stage 2 on the engine. Love the content of the channel guys. Please keep up the great work.

[@DeliciousDeBlair]

I agree! Stretch the back end like a mountain rail or a drag bike! (~_^)-b

[@lcbcreation8205]

Yes you know what's up

[@joeofloath]

I had a similar one and stretched it. Loads of fun!

[@thedude738]

This is exactly what I was thinking too, I'd love to see them do this!!!!!

[@BuzzLOLOL]

Should do 65 MPH as is... too fast for that sketchy little thing... and no brakes?

[@CarsandCameras]

The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY. Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

[@jakechunasamy9642]

CarsandCameras can u tell me what that atv is called I want one

[@redneckcreations1715]

How much do you want for that little quad I want it

[@jakechunasamy9642]

Retro Vlogs he sold it

[@loonycustoms44]

I think you should make an extended swing arm on the back and wheelie bars, tune it up improve the handling and use it at busco beech. Absolutely love what your doing guys keep it up!

[@572chevybb]

Don't forget independent front suspension

[@CPOKAY2]

+1, lengthen the frame out back, then it’ll take the power

[@antwerx]

+1 Come on guys extend the swing arm!

[@alinazalewska1543]

Njj

[@calebkissinger5451]

yeah get this thing to busco:0

[@krudlumpstv7854]

3 minuets and 45 seconds into the video John has the biggest voice crack 😂

[@faresalsalahi9764]

lol

[@frunzoiu]

Extend the wheel base. so you can seat more properly on it

[@gmanshackshack6822]

move those back wheels back... even just 6 inches

[@redneckhb1494]

I agree, on street bikes even just 3 inch stretch kits help with the wheelie control

[@mikecarson4625]

Maybe add some pegs over the front wheels, it might keep the front down and make a better ride.

[@kylearruda1041]

Good idea but might be easier to start from scratch

[@allthoseclips582]

+1

[@Geequed]

Extend the back end , widen the back axle, put beefier tires in the back, maybe a single shock (dirt bike style suspension) and highten the handlebars....maybe with a steer damper. Would be a beast...kinda like one of these dune/drag racing ATV:s. Greetings from Northern Sweden! Thanks for years of great entertainment, as always keep it safe but have fun!

[@austinliveoak1018]

I believe when the chain popped off when doing the burnout, the axle actually popped forward. I would check into that. That could also be some power and speed loss.

[@comptongokartracing3426]

Austin Liveoak I saw that

[@thedoerofthings493]

It doesn't need anymore speed lmao

[@MrImpalaRider]

Jon’s scared to death of all 19 mph from that little thing. You can see it in his eyes when he’s talking about putting it up 🤣🤣

[@drewtooker4243]

Stretch the rear end to make it wheelie less. Maybe move it 8 inches rearward

[@taylorschlichmister9487]

also change the rear sprocket gearing

[@buridanjwh]

this, and maybe widen it by a few inches. the rear axel should be about 8 inches behind where your butt is. and then you should be able to put some shocks on it.

[@bev2423]

Backword 🙄

[@Nograc_]

@@bev2423 backward

[@hunterrrwlodarczyk476]

@@bev2423 backward*

[@richardoconnor7162]

You forgot to ask John to hold your Beer while you tried to go through that mud....LOL

[@playinwithfirecustoms7954]

Extend the swingarm, build some suspension, and widen it...c'mon guys, don't give up on the wee Beastie!!

[@dustinmiller7278]

Wouldn't be so wee if you make it bigger

[@allthoseclips582]

Giant tires, longer wheelbase :)

[@TheDominos1]

Damn it you guys made me purchase a Mini Bike and relive my childhood! How absolutely wonderful you guys are. My mini bike childhood days were like most boys the very best days of my life.

[@smil3y_tv363]

Love you guy’s ❤️ You guys Really inspire me on building homemade go carts and I really learned a lot thank you guys for everything

[@driveitbreakitfixit7496]

Smil3y_ TV to bad they get all there parts for free

[@deathmalice256]

Thanks for the inspiration guys. I'm in the process of building a 212cc apc electra chopper.

[@lewisodonnell234]

Stretch it and put a 2 smoker in it. 60-80-125cc in it

[@Baldys_projects]

Oh yeah give me a little four-wheeler like that I'll put a 66cc 2stroke bike engine on it haha

[@nicovanduin1553]

@@Baldys_projects those bike engines are gutless

[@DirtGearTv]

I so love your business model John! Not only do you get to work on crazy projects with your best bud, but one can film the other no solo camera shot setups! 😆

[@trecedaves3159]

Stretch that rear section and make a baby hill climber. That would be sketchy as all get out and a fun show!

[@Thedudeisblue9725]

Laughed when I saw the neck brace. Spit out my drink when I seen the back brace lol

[@Nate-ev6sg]

Imagine these guys on a banshee

[@cheriesteiner2326]

I think y'all should stretch and widen plus full independent suspension on the deathquad, just my opinion, love y'all keep up the good work, I've been watching for years.

[@shockwavemikey64]

Extended arm and weights on the front. Best of both worlds.. I feel like this is the drag quad everyone deserves.

[@Steve_Just_Steve]

I'm telling you guys EXTENDED SWINGARM! And bigger tires, Make that thing rideable!

[@LeoTonius]

It'll mess up the whole idea.

[@Steve_Just_Steve]

@@LeoTonius The idea of what? Scrapping the project because it's "too dangerous" and not rideable? F that idea.

[@NotMeeither]

Stretch the frame add wheelie bars , big paddle tires and a TC and set it up for sand drags at Busco Beech !

[@greenwizard2000]

2:50 that looked like a move straight outa some trials gameplay Ike did there! xD

[@elijahallen475]

I just got done riding my 200cc Baja warrior rat rod mini bike and now I get to watch you guess today is good

[@TheLoneWolf1124]

Haha it looks like your riding a 1/5th scale rc car.

[@gunner8709]

Yea

[@crusader1945]

I would say 1/4 scale but yea

[@maximumrpmrc2312]

It dus

[@TuckerBlack]

Just looks like an xmaxx

[@critch84]

Seen a few comments already about stretching the rear. While I am in agreement about this I think you ought to consider building it into a swingarm like you'd see on a full size atv. Make it with a wider stance and then also stretch the front enough to accommodate a-arms that match the new width of the rear.

[@ProMotoo]

Put REALLY wide slick go kart wheels and an extended swing arm on it. It Will be a beast

[@chazrobertson1990]

Would be cool to stretch the kid 4 wheeler and put bigger tires on it...and you guys are awesome

[@rayscyclesrepairs3516]

“BILLY POP THE CLUTCH” 🤣🤣🤣@ 2:53 Great videos guys!

[@bruceminnier2936]

The VW was the "Harlequin Golf"

[@dustinmiller7278]

Wasn't just the golf they also made a Jetta and a shirocco of the same year I have videos of the Jetta version from a car show in Washington (all factory paper work with it was a real deal)

[@taylordarr3]

@@dustinmiller7278 negative. Only the mk3 golf was OEM harlequin. If someone did it to a jetta, it was after leaving the factory. Also, it's "scirocco".

[@KodiTufo]

@@taylordarr3 it was a dealer thing. Not a factory thing

[@taylordarr3]

@@KodiTufo incorrect. The vehicles were completed in 1 of 4 colors and then assembly personnel disassembled and refitted the panels on different colored cars.

[@JoshTHankins]

@@taylordarr3 there was also a MK5 rabbit. I have never seen on in person, but the commercial from 2006 has one in it. kzbin.info/www/bejne/mGebeKBrjputiqM

[@evhexrc1765]

You wanted us to come up with ideas for you to do... 1) put a Honda GCV160 5.5hp engine from a MOWER(yes, vertical shaft- all you have to do is rotate the carb/intake/relocate gas tank) onto a bicycle 2) put a Honda gcv160 5.5 vertical shaft engine from a mower onto a go kart 3) put a chainsaw engine or weed eater engine on a longboard 4) make a dual predator 212 powered tandem bicycle (that way you don’t have to “rockpaperscissors” for who gets to ride first) 5) swap some of the predator 212’s you have on your builds with predator 420’s ***note: the Honda mower engines are things you can easily get for free on Craigslist. I have one that I’m happy to do a project with you guys if you want. I live in NC probably under an hour away from you guys and have major ties with Elon. I emailed you and you never responded:(

[@seanchastain9801]

Put a wheelie bar on it.

[@lilporno6583]

Sean Chastain ok

[@dalejackson5003]

QUIT COMPLAINING JON this is perfect

[@danielihlenfeldt3580]

Stretch the frame to keep the front end down to reach it's full potential.

[@SPEEDY1894]

Way too much chain if they did that

[@termone1493]

@@SPEEDY1894 Jackshaft...

[@SPEEDY1894]

@@termone1493 yah they are famous for that :)

[@termone1493]

James woods yea just stretch it longer than the dragster and put like 15 jackshafts... easy

[@samsgarage1716]

Super cool Mini Atv.I put a 212cc on a kids little dune buggy and that thing rips.Great job guys

[@Fox_Stang_420]

You guys should stretch it and move the foot pegs back to where you have more of a sportbike feel and if it needs it put a wheeliebar on it.

[@robertbelote5273]

This is a question not a comment or suggestion, is it worth the time and effort to extend the rear widen the front and put it against the drag rail?

[@H3adcrash]

I quite like this concept of an engine on wheels, haha.

[@tazyt3388]

Woohoo what a little monster keep em coming we luv it

[@piratepete-thetruthisforevery1]

* Correction * Its a MINI trench digger! LOL! BUT only in semi-dry conditions... 🤣 Note to self... Melted rubber burns! Thumbs up! 👍🏼

[@olekaarvaag9405]

I obviously don't want Ike to suffer or anything like that... BUT! Part of me really wanted to see Ike not catch himself in time at 5:13 and completely faceplant in the mud. Crazy, dumb and crazydumb idea that would make it super stable; make a quadcopter inspired design. With a super long and wide wheelbase and keep the rest as small as possible. It would be ridiculous but so awesome.

[@yettidoggzumii1581]

It's Adorable.. 😅😋 You guys should rig up a Crash Test Dummy to ride that thing.. 😎

[@jacobsebastien3910]

Lol

[@dude_mccallaster]

I don’t know why I’m so intrigued by this damn bike I’ve watched like every video on it, cool build guys.

[@MikeMac90]

Extended swingarm full suspension around it and wider stance. Think it’ll be the first Chinese kids atv with an extended swingarm that I’ve seen 😂😂😂

[@curt5160]

Loads of ideas for something like that.... Move whole rear axle back (extended swing arm type thing), some sort of rear mud guards, lower tooth sprocket, go all out on the carb tuning (jet drill, porting) see if you can get it to rolling burn out

[@1hipcrip771]

Bahahaha! It sounded just like your intro when tried to fire the motor in the mud!

[@mikewestervelt9440]

Extend the frame/wheel base, larger wheels and tires, and front end weight... be a neat little drag/race quad!!

[@RetiredTechnician]

A single engine 4wd rally kart would look awesome. Shaft or chain drive 😏 good bit of fabrication/engineering for you guys to work out.. Great content none the less

[@copperstone19]

Just one mod. Like a dune quad extend the rear 8in! Will provide all the stabilization you need and a 2nd mid sprocket to keep the chain setup tight

[@jacobraydesign]

poor truck has a flat tire :( lol great video. can't wait to see that truck on the road

[@glencalhoun9544]

Add some width to it to stabilize it out. Then extend the rear swing arm to make it more stable during wheelies or hard launches. After that youd have a very stable very quick lil monster.

[@St0nedCr4b]

Don't park it! Stretch the rear end out, put a wheelie bar, and some kind of suspension in the front

[@stevemanske4321]

Bryce Flinstone gnhubbbbhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhehhen hbhbhhenhbhhnhb ehhehhhhhehhhhhb r rbhbhbrnnhjhjhjhhjhj. B

[@calvarycustoms6681]

@CarsandCameras here’s an idea: remember the cool little “mini-rig” that was at GPS a couple of years ago? I think it’d be a cool tribute to the passing of Burt Reynolds, if you guys built a gocart version of “Bandit Two”, the Kenworth in Smokey and the Bandit. Start with the Tilliquad, using the motor for the truck, using the wheels and tires for the trailer, then take the frame, handlebars and seat, and install them in... well, the nearest scrap-pile, preferably. 😏

[@b.g.yodagrow5344]

Everyone says "stretch it" , "wheelie bar" etc. What they don't understand is that you guys always try to get the most out of stock frames. If you mod it too much, you might as well build from scratch.

[@rogue5861]

Tracy Autumn they already cut it up, no reason not to stretch it.

[@Charlie-yh9wz]

I have been watching since u guys had 17 thousand subs

[@kuckam98]

The golfs you’re talking about are the harlequin edition

[@wonkybomb1865]

That thing is a perfect candidate for an extended rear. You could sit back farther for better comfort and weight transfer and I think it'd be less darty on steering you could maybe put some foot pegs way out in front of the front tires like a chopper so you can stretch a little. Cool build!

[@codystewart1615]

I have the same mini quad. I think im going to put a predator 212 on it now lol

[@hshsshhwhwejejeje6652]

Cody Stewart whats the quad called? I’m trying to find one

[@codystewart1615]

@@hshsshhwhwejejeje6652 I dont know the exact name, but ebay carries parts for it listed as a pocket quad or mini quad 49cc. Something like that.

[@dadamark1]

i would like to suggest learning video on tuning torque converter with different springs for more performance like some higher rpm taking off

[@joegotillyoublow1834]

You need a four foot teenager to sign a waiver and go nuts on that thing

[@Alfred..E..Neuman]

I was thinkin more like a 3 foot midget!!

[@Professordunce1]

I'm 5 8 and thirteen I'd ride that.

[@christycopley4463]

5, 3 13

[@koskey06]

I've been saying for decades. A company should make a mini quad!

[@nickshabat258]

Put a wheelie bar on it and call it mini drag quad (like if u agree)

[@thebearman6065]

Extend frame and swing arm for sure! Has the potential to really be a nice cart

[@seanchastain9801]

Ya'll need to stretch it and beef it up..

[@shepdgc.og.soldier7732]

Longer axles wider wheelbase.I like The independent suspension idea though too on a wider base. Or just trash it because you have to change nearly everything to make that high chair safe.Spare motor..?✌️

[@quentinkave8442]

Build a trailer so the monster truck gokart can pull the 4 wheeler😂😂😂😂😂😃😀😊

[@chandlerrohl1014]

Nothing beats to see pure fun than a grown ass man on a little atv.

[@coffeyscarburetors6437]

You really dont need to go much faster then that. 19 mph is fast for that thing.

[@bigbadjohn8534]

I was thinking y'all need to add a wheelie bar to it. Like the one y'all put on the little black mini bike.

[@kingz-244]

why don't you guys try and stretch it so it does not wheelie all the time lol

[@andrewml52]

Have you guys thought about lengthening the rear a bit and making a mini drag bike out of it. I bet it would be quick

[@SmOoThYwOoDy]

Dam don`t you ever clean the cup and welding tip? Looks like its about splattered closed.

[@connorquinn6310]

you guys need to get those super knobby tires that are made for snow blowers for that 4wheeler. They would look and perform awesome.

[@kenbarnes3804]

Can you raise the handlebar and add foot pegsoff the front push bar?

[@chrisjohnson131]

Hang a weight on the front somehow to keep the front end down and improve steering. Also a partial fender over the rear tires to keep your feet off of them

[@smidydevil]

I made something similar, a kids 50cc pocket quad with a. 110cc pitbike engine with gears, was great fun I extended the rear end to stop wheelies but it's gets so tempting to drift everywhere now lol also extend the handlebars upwards to make it easer for tall folk! Once you get up towards 30mph they get very twitchy on the steering if you snap off the throttle

[@thomaslott8046]

Hey where did you find the mini banshee? I seen a post a while back of new production of these mini banshee atvs, full plastic too. But it was in Japanese and cant find one anywhere

[@tis_kolbos7677]

I suggest wheeliebar and forward extension of the handlebars I mean if you want to stay on it when it wheelies

[@craigcarpenter2069]

Love the content as always! I suggest an extended and widened rear axle and suspension system. Say 2 to 2.5 foot rearward and widened about 1 to 1.5 foot. Use the original axle mount as the mount for the extension bars. Make a mount under the rear seat loop for a large mono-shock and adjust for a few inches extra lift from larger tires. You could also use the existing rear axle mount as a point for a chain idler or tensioner and use heim Joints to achieve some articulation.

[@gimble8638]

im guesing you mean the harlequin when you say multi coloured VWs John? altho in europe they only did that to the polo, and yes all the panels were just randomly changed around on completed one colour cars, so basically you knew what colour your car started out as just by the roof, door shuts etc :) :)

[@slackersteve2004]

Ive been looking for a Hemp Beaded choker, where did Ike get his? very cool design. Keep up the builds guys, awesome vids

[@gavinjones9051]

Build a trailer so you can pull the quad behind the monster truck. Lol

[@calebkissinger5451]

you guys and rather B welding should go to busco beach and compare mini ATV's I would really like to see that video

[@rustyshacklfort9508]

Stretch it , slicks in the rear and a wheelie bar and it’s the perfect companion to the drag mini bike .

[@gertfrobelives]

What do you guys think about the keys that advance the timing on the 212 predator motor?

[@albertjenkins8121]

Use header wrap on the pipe to take the heat twards the back of the pipe an muffler! Will help!

[@darrellh.9680]

If you guys widen the wheelbase, I think it would improve the stability!

[@donaldburkhard7932]

When doing seat put extra lift I back portion to help with sliding off back, like some bigger motorcycles have.

[@oldschoolhillbilly560]

At 39 seconds Ike looks like a pelican. Sorry that was to good to let it go. Keep the the good work.

[@kylearruda1041]

Most sketchy build yet might even top the red wagon cart. Love the content guys keep up the fun work and stay safe. I'm still waiting for a true 4 wheel drive go kart with full drivetrain out of a 4 wheel drive quad.....

[@davidmcmanus7717]

How about footpegs on front bumper shift more weight forward.?

[@OpenRoader]

OK, that was freaking HILARIOUS!

[@tonyhayes4934]

Stretch the rear of the frame for better stability. And add a motorcycle springer type seat for cushioning on bumps

[@Sloppyjoe96]

can you like extend the handle bars up so you can actually turn it over your knees

[@lcbcreation8205]

You guys need to stretch the back out a little more definitely a long wheelie bar. Widen the front and rear axles alot so it's more stable and grounded. Then maybe mount and extend the handle bars a little for turning purposes. But dont park it! dont park anything for to long! I know its supposed to be a mini build but that doesnt mean you can make it drivable and kinda safe... but whatever you do with it have fun be safe. I see a stretched out mini drag banshee when I look at that thing. Oh and dont forget some wider wheels!.. in the back, leave the front pizza cutters.

[@Slane583]

You guys should try getting your hands on a rolling three-wheeler chassis. It would be fun to see what you guys could do with something that isn't a normal atv or gokart. :)

[@lilsav6962]

Quad bike looking like Optimus Prime Red and blue, "Autobots, Roll Out!"

[@2080bop]

I want to get a mini bike but I don't want to mess around. I'm over 200lbs and there's nothing but hills around here. I'm thinking the trailmaster but any suggestions on the mods I should do?

[@MIKEH.777]

If you even have the mini quad anymore I think you guys should extend the swing arm on the back or make a swingarm on the back

[@VdubSPAZ]

I think you should stretch and extend the rear end so that way it's more stable for sure and also make it a little bit wider in the rear kind of like a drag bike would be

[@THEjohnnywhopper]

pull the tillotson for another project. drop a little 3 horse 79cc in it and give it to a nephew or niece or something. was a cool little test project, but i think it's reached its potential.