15 tooth Max-torque clutch vs 12 tooth / top speed / Predator 212

15 tooth Max-torque clutch vs 12 tooth/top speed/Predator 212
Tested to see what top speed the Coleman cc100x minibike would achieve with a 12 tooth Max-torque clutch and then swapped the 12 tooth for a 15 tooth and compared the difference.
Coleman cc100x Playlist - • Coleman cc100x minibik...
Music - INOSSI - Weekend _ Background Music No Copyright (Chill)-qsTtZ81jkQk
Instagram - doubledown555black66
__________________________________________________________
Parts used -
ARC.020 billet rod - www.arcracing.com/6256-billet...
ARC billet flywheel - www.arcracing.com/6695-predat...
GX 160 head - www.amazon.com/gp/product/B01...
VM22 Mikuni carburetor - www.amazon.com/gp/product/B07...
Header pipe - www.ebay.com/itm/193709332828...
Clutch - www.gopowersports.com/12t-3-4...
15 tooth clutch www.ebay.com/itm/184863521810...
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos.
Black66 does not take any responsibility for injuries or equipment failure created by doing so.
ALL BLACK66 CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

[@gloriabauer2392]

Yeah that made a big difference.

[@Black66]

Ya, it did!

[@youtubecertified4643]

Wow. Also another dead end link for the clutch. Good job bud.

[@rodricbeauregard1053]

He man, i really love your channel❤ great info, great delivery. Good stuff! Peace😊

[@fatbuddycat]

It's gonna fly given the ability to do so. I tried this with a 74t split sprocket and it was great when it finally hooked up. Big benefit on longer rides is that you can achieve the speeds the 12t does (and more) but at a lower rpm. Toss a black spring in one and you should engage at a higher rpm to improve the "launch program "😃.

[@Cruizerdoesit]

wat about the 13 tooth max torque on a 65 rear thats wat im thinking i just ordered one im just curious if it has the key in it

[@fatbuddycat]

@@Cruizerdoesit that's going to be 5:1 and a little bit of work on the clutch. I'd have to check but I know what you mean.

[@Cruizerdoesit]

@@fatbuddycat i still got the 74 stock sprocket tho so i can pop that on to balance it out right

[@Cruizerdoesit]

@@fatbuddycat this cheap 12tooth clutch been doing good tho i really cant complain never had a max torque so i chose the 13 to start with

[@fatbuddycat]

@@Cruizerdoesit I just ordered another 12t for my next build and now I'm running ratios through my head wondering if I should have tried a different number....wouldn't be confusing but I want to run a jackshaft on a small tire with 7k rpm at the hornet release 😅.

[@fatbuddycat]

You no your going fast when you can't speak till you stop a few seconds 💯.

[@Black66]

Ya no lie , that bike feels like 100 when your going 60 lol

[@caseykelso1]

Your neighbors must think your nuts🍸I'm that guy in my hood...🤣🤣🤣

[@Black66]

They probably do, but I like being different LOL

[@5kdaking334]

Sheeesh! I’m gonna get one of these if my parents let me!

[@Spacecruizer203]

Awesome again

[@johnk6346]

Good Job you smashed right thru the 60 mph barrier.

[@Black66]

Ya, right on through it!

[@nathanmciver6496]

How easy is it to tap those shafts? That would help alot for easy mods! Nice tracking the numbers! I have a few of those clutches, interesting to see how much extra you got out of the other clutch

[@heathenprojects2639]

Mad scientist at work

[@Black66]

Lol

[@rfrazier113]

Any info you can share on your jack shaft delete parts especially tensioner? If it is in a video, can you point me in the right direction?

[@82sharpebronco74]

Is that billet rod on the stock crank and stock piston ? And what’s that rods part number and cam number ? Awesome speed !

[@fazelillipup4351]

I have a briggs and stratton 950 series on a doodle bug with a 12 tooth clutch and a 75 tooth rear sprocket going about 40 to 45 mph. What clutch size and rear sprocket size would be best?

[@darrellpearce9241]

I’d like to see the 0-40mph difference on the 12 to 15t. I have a mm80 with basically the same pred but with 18lb springs but I have a torque converter and 12-75 gearing. I just love all the options you have available.

[@sbfguy7793]

I just finished my 13hp Briggs and Stratton mini bike. As soon as the clutch catches it wants to wheelie. It already threw me off once😂

[@Black66]

Lol that has to be a beast! Briggs and Stratton are way cool

[@jimbright8194]

How do you put that speedometer/compass on the screen? I see a lot of videos with that. We do kart racing and I’d like to have that.

[@svpvxtct]

GoPro app

[@emmanuelramos4772]

What’s a good clutch and sprocket set up for 70mph on a Coleman ct200 u ex 224 stock stage 1

[@GILSJOURNEY]

I was wondering if running a 10 tooth on the front and a 51 tooth on the rear would get the same results considering it is still a 5-1 ratio. ? Thank you

[@play4keeps800]

I have stock 212pred. Stock carb. Straight pipe. 12t clutch 54 sprocket. Goin like 35ish.... Could putin a mikuni carb. And 15t clutch get me to 40mph ? You think 54 sprocket to low 75 was too torquey n topped off at like 25mph

[@Black66]

It depends on tire height and weight of the rider etc . You could use a gear ratio calculator . You plug in tire height , gear size , clutch size ,engine rpm and it will spit out a speed .

[@emmanuelramos4772]

I have a 224 stock stage 1 with 10t clutch And 50t rear sprocket . Tops at 63 if I changed to a 14t clutch and 40 sprocket would I gain more top speed hitting 70?

[@williambrown6916]

What do you get the clutch from

[@nicolec7290]

Clean bike

[@madness_-yg3lw]

Dude if you put stamped 1.3 ratio rockers it will really wake that cam up even more same build on my 212 but i got 18lb valve springs so im topping out at 67 6800 rpms with yours having a 22lb in there you will really really wake up that 212 totally worth the 20 bucks to do the 1.3 stamped arms

[@johnnyz.438]

I want to get a 212 and was suggested a 30 series torque converter. I’m using 26 inch rims. Can you help me figure out a speed

[@l.a.m7645]

Do you have a tutorial on removing torque converter using the 12 tooth clutch need to do this to my 200 camo bike. Thanks

[@Black66]

The video coming out Saturday ,I take off a clutch and install a torque converter . I’ll do a video on taking the torque converter off soon .

[@predator_boiz336]

Can you make a video on adding links to chains? I can’t for the life of me get it to work, I mean I could use a bunch of master links but that seems unsafe lol

[@zhannawilliams4040]

Does a bigger clutch also add torque. I have a ct100u that im trying to give more torque. Do you recomend switching from the 75 to a 65 tooth and a bigger clutch in the front?

[@Black66]

Check out this video on minibike gear ratios kzbin.info/www/bejne/roebmmhvlqyIl9E

[@patloughner9551]

By the way what size jets are you running in the carb? Im experimenting with mine.

[@Black66]

It has a 120 jet in it now.

[@devinslayback2103]

do you think ill have enough torque if i get a 60 tooth sprocket with a 12 tooth clutch? im not too worried about top speed as long as it goes atleast 25 or so

[@Black66]

Ya, that should be good with a 60

[@Spacecruizer203]

BeaST LiFE!!!!!!!!!!go get em Mr BLack

[@l.a.m7645]

Question with just a clutch setup with no rear pulley or Torque Converter would you keep burning up clutches?

[@Black66]

A standard Max-torque will last you a long time . Especially if you run a gear ratio around 6 to 1 give or Take because it doesn’t put a lot of strain on the clutch . Another thing too is if your running a common clutch like a 12 tooth , they are inexpensive. Cheap to replace .

[@Black66]

Also the weight of the rider and tire size play a role in how long the clutch will last . I haven’t burnt out a clutch yet . I think it’s because I’m light weight .

[@Spacecruizer203]

tryna find the vid u did on the 10tooth clutch u know where u showed how to insall a keyway ... not like i need to but eventually i know im gonna have to do that keyway jazz to use the maxtorque clutches

[@Flockingtheherd]

I have a ct200u and I’ve been searching everywhere for a 12 tooth clutch instead of the stock 10.. but I can’t find one anywhere. Do you know where I can find a 3/4 inch 12 tooth 420 chain clutch??

[@Black66]

This one should work www.gopowersports.com/12-tooth-41-needle-bearing-clutch-for-mini-go-karts/

[@jaken528]

Do you like the max tourque clutches ? I just ordered one because my Hillard clutch got really rough

[@Black66]

Yes, I have never had a problem with Max-Torque clutches.

[@jaken528]

@@Black66 thanks... How often do you grease or oil the center bushings?

[@-IMPALA-TRXR]

Do u have a idea what pipe that is have same bike and a predator 212 want a center mount pipe like this one

[@aidenhurd2405]

What would be the best clutch and sprocket to get if I’m looking to go 60-70 on a 212cc stage 2 dirt bug mini bike??

[@landontillman8077]

Big sprocket on the clutch and small sprocket in the back and you already have enough power to turn those gears you might get 65-70

[@dillonsharpe8517]

Any canadians here upgrading the princessauto 212 powerfist motors? been wanting to order upgraded 212 predator parts for it but not sure if they fit, been looking for some info cant seem to find much and to order a predator to canada is a hassle

[@JadenCrocker]

Is there any 15-16 tooth front sprocket for the stock 3 hp on the cc100x? Thinking about dropping the rear to a 65 tooth, and front to a 15-16

[@Black66]

Yes, you can use a adapter on the shaft to put pretty much any clutch you want on there. Be careful with gearing on the 3 hp. They dont have much torque . There is a point where the three horse won't have the torque to pull the gear. Or it will be super slow at getting to speed . That is why they gear them so low from the factory.

[@austinlong573]

@@Black66 so what would you recommended for good torque and speed a 15t with the 75t rear or a 12t and the same in the rear? I want to make mine a little more torquey with keeping some decent speed I hit about 38 - 40 with the stock clutch and sprocket

[@l.a.m7645]

Nice! The 22lb spring comes stock on predator?

[@Black66]

No, I added the springs because it has a mod 2 cam .

[@l.a.m7645]

@@Black66 i saw a predator 8hp 301cc engine at harbor freight can that work on a coleman 200?

[@l.a.m7645]

You have a link for the rear sprocket and clutch guard on ebay Thanks

[@Black66]

@@l.a.m7645 Yes, I’ll get those links for you when I get home

[@Black66]

@@l.a.m7645 That would be a beast on a CC 200. That’s one thing about those frames . They have a lot of room

[@youngkingoni7679]

What do you recommend a good setup for that Coleman 3 horse engine ??

[@Black66]

Check out the Coleman CC100x playlist along with the micro bike playlist. They show many different mods on the 3-horse engine. kzbin.info/www/bejne/enqkgWykmLx4e80

[@desertnate]

I've watched so many of these videos for over a year and realized this how how I want to retire! With a huge collection of mini bikes and dirtbikes I use to race motocrosd

[@xaviermccloud4586]

I'm 34 in "2024 early retirement". Never had anything other than regular bicycles growing up. I have 3 mini bikes and a Grom. Don't forget to enjoy your life.

[@mylandbristow6854]

Hey man where do you get your clutches from?

[@Black66]

I get them from all over the place. pretty much all the different vendors.

[@Cruizerdoesit]

im thinking of trying the max torque 13tooth have u tried it and does it come with a key in it

[@Black66]

Check out the cc100x playlist . It shows many different clutch and engine combos on this bike. kzbin.info/www/bejne/jXeoh6KZlMahbrs

[@sandmhoder]

is it ok to have the clutch this way

[@jgreen4715]

What exhaust pipe and muffler setup are you using?

[@Black66]

Check out the cc100x playlist . It shows many different clutch , engine and parts combos on this bike. kzbin.info/www/bejne/jXeoh6KZlMahbrs

[@l.a.m7645]

The red chain tensioner bracket on your frame is that custom or stock?

[@Black66]

It’s stock .

[@l.a.m7645]

@@Black66 yeah I believe the 200 series doesn't have one

[@Black66]

@@l.a.m7645 It’s really easy to add one . It was pretty straight forward even on a small bike like a Baja racer .

[@pacspeed8041]

Ok I need some suggestions. I have a race cart with a 14 tooth clutch with a 66 sprocket. KART tops out at 40 I'm trying to get to the 60 range what should I do. It has very fast take off but stops at about 40mph

[@Black66]

You definitely could throw on a smaller sprocket. Check out the kart videos on this channel. We got the kart to almost 70 playing with gearing. kzbin.info/www/bejne/hn6ym6ydZZ2Bf6s

[@pacspeed8041]

@@Black66 I have a 10 teeth clutch never used

[@Black66]

@@pacspeed8041 Every tooth bigger on the clutch is equivalent to taking away about 6 on the sprocket .

[@zhannawilliams4040]

Do you recomend installing a billet flywheel with a moded engine or is it not worth it?

[@Black66]

Check out the playlist. I have installed many billet parts on many different engines and combos . Thanks for watching! kzbin.info/www/bejne/r2TTnWqBnriHo7s

[@Black66]

Yes, I would install a billet flywheel with a moded engine. Or at least a good cast flywheel like in the Predator $100 mod video.

[@breezetix]

Why not go a smaller rear sprocket? Might make a bigger difference in speed, but of course less acceleration

[@christianborozco2910]

I have a question I hope I can get some help I'm new to all this mini bike stuff and I'm highly interested in learning more about it I have a Mega Moto 80 with a 212cc predator engine non hemi with a 12 tooth clutch and a 75 tooth rear sprocket I only removed the screw governor by but not the governor from the inside of the engine everything is stock my speed is 35mph I just ordered a 14 tooth clutch will I get more speed?

[@LuisRamirez-nb6sh]

You will get more speed but don’t be scared to internally remove the governor especially the one in the crank shaft cheapest way to make your engine more peppy without throwing money at it and port the heads for better throttle response

[@LuisRamirez-nb6sh]

@@09l806 probably another 5 mph cause you’re removing centrifugal weight so it revs higher also you don’t need that high of a rear end sprocket cause it’ll top out so a 60 tooth sprocket will be faster when you’re already rolling cause you’re going from 20 to 40 faster I felt this on my go kart i got a 58 with a 12 tooth sprocket and the feeling from going from 35 to 60 is unreal feels like I’m flying

[@LuisRamirez-nb6sh]

I got a 212 hemi and I put a stage 2 kit which has a billit connecting rod and fly wheel and a 265 hot cam with 26 pound valve springs. I ported the head and of course fully deleted the governer. Also put a 22 mm mikuni carb to make the throttle installation easier cause I wouldn’t have to mess with the stock throttle linkage which I found complicated. It’s a direct linkage from gas pedal to carb so with all that it made the motor super responsive and putting that engine on my sub 200 lb go kart makes the thing fly. But I got two rear end sprockets ones a 58 tooth to go fast on the streets and 72 tooth sprocket to do donuts in my backyard the 58 sprocket goes up to 60 mph and the 72 sprocket goes up to 45 and I got a 12tooth clutch sprocket.

[@pbedrook]

I have a 17t clutch and 75t sprocket i get to about 64 or 65 . Watch sprocket size should i change to, to go more top speed ?

[@romancedennis290]

Damn really

[@jacobminsterketter5867]

Is the sprocket on the back the sprocket that came on the bike?

[@Black66]

In this video it was. The bike has had many sprocket set upon it and engine combos. Check out the cc100x playlist for many more combos with this bike. kzbin.info/www/bejne/jXeoh6KZlMahbrs

[@user-dx2qf9gk5v]

Where did u get the 15t clutch

[@LewisBoyzRacing]

@black66 can you do a video on the 3d motorsports clutch on a 212?

[@Black66]

I have a few videos of it on the kart. I'll have to do one with it on a minibike. Here is a link for one of them kzbin.info/www/bejne/hV6mlYpqbdZ8pdE

[@wyattimpecoven]

Should I down size my sprocket is a 65tooth or my clutch to a 15 cuz I got the same 12-75

[@SkylerStrahl]

15-75

[@5kdaking334]

You need some suspension on that tho. The ride looks mighty bumpy.

[@Black66]

That’s the Truth !

[@madness_-yg3lw]

If you can find one they are called a manco thunderbird mini bike and they come with suspension and let me tell you its so nice on mine when your doing 60mph you cant even tell your going that fast its one bad to the bone frame if you can score one

[@Black66]

@@madness_-yg3lw I would sure try one if I could find one

[@orlandothomas4813]

Where did you get that clutch cover at

[@Black66]

Check out the best chain guard in the world video kzbin.info/www/bejne/bWfToZ9qj9KVh7M

[@LuisRamirez-nb6sh]

Im doing this same setup on my go kart but with a 12 tooth clutch and a 56 tooth sprocket and with the same engine set up as yours just with a bigger jet on a 22 mm mikunin and ported head. I wanna see how fast it’ll go

[@Black66]

It will be fast. Check out the kart playlist. We got this one 70 + MPHkzbin.info/www/bejne/r2aohJSbYt2GacU

[@8822fitzy]

Its scary what tires you all buying? Running 70 on the street with V tire.

[@xaviermccloud4586]

You crashed lol.​@@8822fitzy

[@lenny44_]

looking to put on a predator for the same bike any tips?

[@Black66]

Check out the playlist on the cc100x Predator 212. kzbin.info/www/bejne/r2TTnWqBnriHo7s

[@teepremesuno121]

Hey can anybody tell me whats the best set up for my mb200 minibike it has a 11 tooth stock clutch and a 50 tooth rear sprocketnpretty sure its not the best set uo as im only getting about 43 to 44 miles moh on a 224 cc predator engine any ideas on a better clutch sprocket set up for more speed and acceleration?

[@Black66]

Check out the CT200U-EX playlist and other playlist on the channel foe many sprocket set ups on these bikes. kzbin.info/www/bejne/jmG2nnSQf5ukjZo

[@huntersmirh7283]

Hey can you help me with mine I got a preader 212 and I have a stage 1 carburetor and a exhaust it’s got a 12t clutch and 65t back it only tops out 30 any tips to get it faster

[@fishingwithagoon5868]

Switching to a 40 tooth rear sprocket should get you goin much faster

[@ilycluez]

What’s a good ratio for faster acceleration

[@Black66]

Check out this video. This one accelerates quick...kzbin.info/www/bejne/qpubiaucq7KViKc

[@jacobpotter1296]

I have a predator 212 with a stage 1 kit and 140 e tube with .36 jet with the govener still in it and I have a 10tooth clutch ans the stock sprocket that comes on the coleman ct200u-ex and with the adapter plate for the other sprockets and the take off was fast and the power was immediate but not fast maybe 25 to 30 but I also am 6'1 250 and it was a wheelie machine but last might I took the adapter plate off and put a bravex performance clutch on it 10 tooth and keep the stock sprocket I think it's a 50 or 52 tooth in the rear and then Ran a straight single Chain and the clutch started smoking when I tried to take off it had no power or rpm but when I got up to speed after like 8 seconds that thing was flying but what do I need to do to make it have more get up out the whole cause I mainly use mine for trail riding and with the setup i have it has no get up out the whole and why was my clutch smoking ?? Would love some feed back thank you

[@trentonbaldwin2721]

I really hope you’ve figured this shit out by now cuz I’ve only been into this for like 2 days and ion even have a bike but you need more teeth in the rear if your gonna be running 10 on your clutch look into a 72 or something but every tooth you add to your clutch essentially takes away 3 from your rear and you need more teeth in the rear for torque if you want more torque but want to keep the speed try switching to a 9 clutch 55 rear or 8 clutch and 57 rear this lets you take away some top speed but adds more torque so you will have more get up from the start

[@mylandbristow6854]

Where do u get your clutches from for the 212cc

[@LuisRamirez-nb6sh]

Max torque they make the best centrifugal clutch

[@WhiskersTheFish]

I have a stock BT200x mini bike. Right now I am hitting 26mph top speed with stock gearing. I am thinking of getting a 12 tooth clutch because straight chaining a big bike burns out the clutch. Do you think I could hit 30mph if I go from a 10 tooth clutch(26mph) to a 12 tooth clutch with stock jackshaft? I ride mostly street so if the acceleration is slightly slower I don't mind too much. Plus, after about 15mph the clutch is engaged anyway so It can't burn up then.

[@Black66]

That will work, but it will definitely slow down acceleration. In a straight-chained bike, every tooth added to the clutch is like reducing the rear by 6 teeth. If the governor is not removed, just by doing that it will gain quite a few miles per hour. Check out my Playlist on the CT200U-EX. It will apply to your bike kzbin.info/www/bejne/jmG2nnSQf5ukjZo

[@WhiskersTheFish]

@@Black66 I would actually really like to add a torque converter to my BT200x but it requires cutting the frame, raising the engine, and buying a 5/8 adapter.

[@Black66]

@@WhiskersTheFish No cutting the frame needed.Super easy with a riser mount. A torque converter is perfect for a stock 196. That way you still have the top end without sacrificing the low-end torque. Check out this video kzbin.info/www/bejne/l3PGlnmZr9aXpZY

[@WhiskersTheFish]

@@Black66 it seems the video link you included is private. Would you mind sharing the video another way?

[@Black66]

@@WhiskersTheFish Here is the link kzbin.info/www/bejne/l3PGlnmZr9aXpZY

[@tikwhoop4404]

What app you use to keep track of your speed

[@Black66]

DigHUD

[@tikwhoop4404]

@@Black66 thank you

[@billwilliams8024]

What is your Opinion of a good clutch for speed

[@Black66]

Check out the playlist for many speed tests with this bike. kzbin.info/www/bejne/jXeoh6KZlMahbrs

[@BikeLyfeCeas]

Do you know why my clutch could be grinding when I go?

[@nativeson3233]

Maybe the that brass bushing needs some oil. I use the same oil I pit in my cc100x to oil the clutch bushing. Works great.

[@somuchjuice5528]

Do you have a link for the 15tooth clutch?

[@Black66]

www.ebay.com/itm/174947428063?epid=8012865165&hash=item28bbade6df:g:Z7oAAOSwVQJhSS1L

[@elslrpcuhh4751]

What would a 10 t clutch and a 60 sprocket

[@modernmountaineer]

how does that #35 chain do on the predator 212?

[@Black66]

Really well especially when I run RLV Gold on gold or gold on black

[@superstar3286]

What’s some good gears to run with a bully 13 on the front 310 and big head with 26mm carburetor

[@markrice793]

What's a good ratio for a ct200u with a 16 in front and a 20 in the back

[@Callofdutyjoey]

What is the rated rpm of your engine

[@Callofdutyjoey]

That’s way too much gear on a 196cc. A good setup I would recommend for a stock 196cc engine is 8-12 teeth on the clutch and 50 teeth out back.

[@jeremywheeler8417]

Could you put a centrifugal clutch on a DC motor? I'm crazy, have no idea what I'm doing, and want to try to build a electric motorbike using a 3000 watt DC motor, speed control, and battery.

[@Black66]

I think so. But really no need to since the motor doesn't need to idle. Check out the e-bike build thanks for watching the videos. kzbin.info/www/bejne/pGPEoGSqjtWhnLs

[@Gr33nGame420]

What speed app do you use?

[@Black66]

I use digiHUD on the phone along with the camera GPS for top speed and a Dragy performance meter for 0 to 30.

[@xa5hhayezx241]

Does this have a governor delete?

[@Black66]

Check out the cc100x playlist.This bike has had many engine and part combos. kzbin.info/www/bejne/jXeoh6KZlMahbrs

[@Strict30]

but did it get up to speed fast with the 12 tooth?

[@Black66]

Check out the playlist for many speed tests with this bike. kzbin.info/www/bejne/jXeoh6KZlMahbrs

[@ilycluez]

I need a gear ratio that’s good for a 90+ minibike alot topend and fast takeoff

[@kalebcharlton9925]

a torque converter and 30-40 tooth would easily get you to 90 and probably past

[@josetallador2130]

What size chain and what sprocket you use

[@Black66]

I use RLV gold on gold 35 chain. I use many different size sprockets depending on the combo.

[@josetallador2130]

@@Black66 than you so much man I was gona order 15 tooth clutch and just wondering if I need to order the sprocket too I have colman ct 200u ex,will the stock sprocket be just fine?

[@juaquinkittrell7922]

Where did you get it from

[@Black66]

Most of the time I will put links in the description on the videos for that parts used.

[@royalknight4742]

I changed my sprockets from stock to 14 an 60 an the motor feels like it’s gonna rock off it’s kind of hard to explain other then feels like the motor is just rocking the frame forward and backward!

[@ilycluez]

Does a carburetor mess up the motor?

[@Black66]

No. It makes it run really good

[@Angelhernandez-uw3rw]

How did it do on the take off

[@Black66]

It did really well on the take-off. With the 15 tooth clutch it still has a 5 to 1 ratio because of the 75-tooth rear sprocket.

[@MoHunnidzGunCollections]

What chain and sprocket ?

[@Black66]

I have done around 400 videos on the channel so far. Its hard to remember a given video. Check out the CC100X playlist for many combos with this bike. kzbin.info/www/bejne/sGbCYXlqqbiCa68

[@Back.yard.stunts]

I wanna know where you got that chain Guard😂😂

[@Black66]

Here is the best minibike chain guard video. Also check out the CC100X playlist for more combos on this bike. Thanks for watching! kzbin.info/www/bejne/bWfToZ9qj9KVh7M

[@clintonison3749]

Did the torque fall off

[@BikeLyfeCeas]

My 15 tooth clutch was working good then I came to a stop and did a pull and it started grinding like not wanting to engage

[@stoney1816]

What size chain do you run ?

[@Black66]

Most of the time I will use RLV Gold on Gold 35 chain. That stuff is awesome!

[@xXPXSERXx]

5:54 scary ass road for a top speed run

[@Black66]

Check out the playlist for more speed runs on different roads .

[@williambrown6916]

Where do you buy the 15t from

[@Black66]

I picked it up at OMB warehouse . Here is a link www.ebay.com/itm/174947428063?epid=8012865165&hash=item28bbade6df:g:Z7oAAOSwVQJhSS1L

[@hectorb1921]

So you could fit a 15t and 18t without messing with the chain?? This video you said you didn’t have to and in the 18t you said the same.

[@Black66]

Depending on the length of the chain and the tensioner, there have been quite a few situations where I didn't have to add or subtract chain. If I do, need to break chain, I just break out my trusty chain breaker. It makes quick work of shortening chain.

[@christopherharrel6202]

Do you have a stock rod

[@Black66]

All the parts that are used in the engine are in the description

[@NbakNbak-zd3in]

Did you remove the governor 2

[@Black66]

Check out the cc100x playlist kzbin.info/www/bejne/qnvIpqNvl9RgrdE

[@NbakNbak-zd3in]

@@Black66 I have a question

[@christophermullikin3688]

Why u not using a 212 gas tank I do I got same bike

[@Black66]

Check out the cc100x playlist. I use multiple tanks on multiple bikes. Thanks for watching! kzbin.info/www/bejne/sGbCYXlqqbiCa68

[@moay3750]

Is this just a stage 2 kit

[@Black66]

Check out the cc100x playlist for many engines and combos with this bike kzbin.info/www/bejne/jXeoh6KZlMahbrs

[@dustinjohnson2116]

Where is clutch from?

[@Black66]

Links are in the description of the videos for the parts used. Thanks for watching!

[@joaquinhernandez9275]

I’m no expert but the chain is too tight make it a slight bit looser you’ll get at least 5 mph more

[@Black66]

I hear ya. This is just one of many combos I have tried on this bike. Check out the playlist kzbin.info/www/bejne/fJOyZoKfjayoedU

[@christophermullikin3688]

Do u use shim on clutch

[@christophermullikin3688]

Why u use a shim on clutch can I use any washer for it lmk

[@christophermullikin3688]

What's the reason

[@Black66]

Chain alignment

[@christophermullikin3688]

@Black66 can u keep governor arm on if I remove the governor

[@Spacecruizer203]

stop cutting tHru the work man a newbie like me needs every lil detail for instance the clutch bolt that i bought for the 3.5 motor dosent tighten fully its a 5/8 idk afg karts tottaly sent me the wrong bolt with washer and lock washer

[@Black66]

Ok I’ll put more in there when I can .

[@williambrown6916]

Speedometer app use

[@Black66]

I use the GPS on the camera and a Dragy performance meter and also an app on the phone called digHUD

[@DivineMisterAdVentures]

You skipped over the engine displacement. It looks smaller than the 212cc.