17+ Hp Mini Bike!!! ~ Tillotson 225cc & Juggernaut CVT Pulley

Today we get Mrs. RB's TrailMaster MB200 mini bike in the shop for a make over. We install the Tillotson 225cc engine coupled with the new Juggernaut cvt pulley from Go Power Sports!!! Please let us know what you think by commenting below. Don't forget to like, subscribe and share...
Parts Used On This Bike
Juggernaut Pulley - bit.ly/3aAl355
Tillotson 225cc Engine - bit.ly/39XzZu7
Tillotson 225RS Long Block - bit.ly/2PtwRxQ
Tillotson 196R Engine - bit.ly/2VtFe03
Tillotson 212 Engine - bit.ly/2BC0bLg
Tillotson 212 Electric Start Engine - bit.ly/2QoKxuy
Air Filter Adapter - bit.ly/38VQ3Li
24mm Flat Slide Carb - bit.ly/31TsUWm
Trailmaster MB200 Mini Bike - bit.ly/2OutchV
Performance Kit - bit.ly/31F8gJL
K&N Air Filter Cleaning Kit - bit.ly/2ISZyAA
Muffler - bit.ly/3441q2e
Gas Tank - amzn.to/2Ntt0lZ
Shocks - bit.ly/38MlZmj
Build Your Own Exhaust Kit - bit.ly/2NDPdM9
Check us out on ROKU - bit.ly/30lHmaA
Merch & Events - bit.ly/33YbmtO
Check Out Go Power Sports for all your Go kart needs! bit.ly/2viX9vP
Parts & Tools used on the channel - amazon.com/shop/redbeardsgarage
Quantum Welding Table - bit.ly/2HVk8jl
Everlast Welder - bit.ly/2T0V0xK
DuroMax Generators, Pressure Washers, & Engines - bit.ly/3894jRJ - Use 20% code RBG on ALL DuroMax products for February 2020.
Tube Buddy Affiliate- www.Tubebuddy....
1740 Beard Balm - bit.ly/32L1eVS save 15% with RBG15
Help support us on Patreon - patreon.com/redbeardsgarage
Want to donate without the commitment? - paypal.me/redbeardsgarage
Want to send us something?
Red Beard's Garage
P.O. Box 572
Sweetwater, TN 37874
Facebook - redbeardsgarage
Instagram - redbeardsgarage
Google+ - redbeardsgarage
Pinterest - redbeardsgarage
Twitter - redbeardsgarage
Instrumentals by Chuki Beats - / chukibeats
-------------------------------------------------------------------------------------------------------------
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos. We are trained professionals. Red Beards Garage does not take any responsibility for injury's created by doing so.
#RBGKarts #RedBeardsGarage

[@glennhotchkiss7900]

Dear Red Beard Garage Team. You all are doing a great job. We love your builds and your rides. Congratulations on your new garage and property. We really liked the extra scenes in this video. Good job everyone.

[@craigkirkland]

If you could forever do an engine breakdown like that I will forever love this channel that much more

[@spicydeath82]

I for one have missed the riding videos. that was the best part. you building something and then taking it for a ride. gave me good insight into which upgrades were really worth it for the type of riding i like doing.

[@noahrogers513]

I love the way you start breaking it down,sounds so nostalgic ❤❤❤❤

[@GussCustomCreations]

Youre a lucky man sir. To have a wife that will even hang in the garage with you is rare. Thumbs up. and Go go Mrs Red Beard. Props to you!

[@RedBeardsGarage]

She's an amazing woman that's for sure!!!

[@meco72104]

Glad Mini Bike Monday is back.

[@jknepper5097]

I personally like the ride videos. testing somthings' performance after you built it is one of the best parts of the job i think. keep up the good work my dude. Love the content.

[@fan1701]

That engine sounds great! You could hear the rpm's go way up across the field, too.

[@slickniner]

The 90s theme throughout warms the cockles of my heart.

[@MRT_H]

Go Mrs. Redbeard!!!! Kudos! Looks like you are very proficient with mechanics. Keep it up!

[@joshanderson1019]

I absolutely love the juggernaut. Some people say they are afraid of putting it on something heavy, like a go-kart, but my kart is about 200 pounds and with a stage 4 predator if you hammer the throttle at any speed, the tires instantly spin and if they're hot it wheelies, something the stock pulley couldn't do. Great video and God bless.

[@RedBeardsGarage]

We love it!

[@eyeballengineering7007]

I love it on my heavily built motor too.

[@Tampaboys]

Very cool that bike looks like it has a lil bit of get up and go awesome work red Beard super cool

[@jeffebinger1218]

Love the game show announcements ,had me balln😁

[@joneserupinsmoke9161]

Freaking cool the Mrs getting in too

[@Johnnyreengo]

Man, look how far you've come!

[@kenjohnson5498]

If those are sealed bearings on that jack shaft take the seal out of the backsides that go to the inside and they will be greased all the time after you put a grease fitting to it. Same thing on your lawn mower deck pulley bearings.

[@brianpeel8259]

Contemplating buying a 225 tollitson for my mega motto 212

[@jackallen6261]

Why would anyone be upset calling it what it is? It's a torque converter! Just like a lot of old snow mobiles! Back in the day we called them snow mobile clutches! Great video and ignore the haters...Just keep on keeping on!! Namaste!

[@Deucealive75]

Boy did that engine sound good. Wow.

[@edwardbrown4455]

We want more minibike videos!

[@timelson6659]

That engine sounds amazing in this video!

[@justlive56]

OMG PLEASE BUILD ONE OF THOSE DEUCES! And keep uploading riding videos I enjoy them

[@RedBeardsGarage]

We have some good Deuce video's coming soon sir

[@justlive56]

@@RedBeardsGarage awesome! Thanks, the deuce is my favorite go kart.

[@leonardwalters154]

Wow it's 9PM here and I need my sun glasses lol

[@kartnerds]

That bike gets going.

[@Dingbobber]

This is exactly the build I’m looking to do, thanks for the video

[@RedBeardsGarage]

Glad I could help!

[@woodya08]

Do these 225 tilly come with or accept electric start? Is a different pull start cover needed when adding aftermarket electric start?

[@richardllaine8267]

Yep there's the new head mechanic of the old red beard garage

[@mikeh2296]

I love mini bike Monday 😎👍

[@samsgarage1716]

I’m getting one for my super fast mini dune buggy.great video.

[@keithgrant3929]

Look at the lady Red Beard getting work done.

[@joshkoerner7024]

My favorite part was the tv style information about the parts.

[@tdismkr]

Likes for the lady tech go Mrs.Redbeard !!!

[@LuchMobGarage]

Awesome video 🤘🏻🐿🤘🏻way to go Mrs. Redbeard 🤘🏻🐿🤘🏻

[@erautosales4997]

Making the Mrs. go to work. You are a ATUD!

[@arthursmith5409]

Fast talking disclaimer on the end of next product ad offer? U dudes are getting TV funny.

[@ryanparker6926]

I want to see you race something with that 220 Kawasaki you built for you daughter lol love your channel

[@RedBeardsGarage]

We will do a whole video on some racing this weekend just for you sir

[@byrnesy919]

Whats the main reason people dont use centrifugal dry clutches where the engine sprocket is attached to the clutch drum? We use them in professional racing go karts for 2 strokes that produce 25-40 hp and they work perfectly. These cv clutches just add weight or is there a good reason there used?

[@Deucealive75]

Variable gearing is why people like them. Starts at about 2.7/1 then when the belt fully shifts it's .9/1 (overdrive) using a stock 30 series. There is smoother power delivery, better low end and higher top speed.

[@TejasToolMan]

pretty cool build, I can see you getting an old BW350 frame and put a 450 or 500cc air cooled in it you will be happy ;)

[@joeypriolo]

No fair! The 225's are out of stock

[@drewanderson8279]

I ordered mine a month ago and man is it badass

[@sifisomasina1164]

@@drewanderson8279 i have 223cc

[@johndough4338]

@@drewanderson8279 ...how is that engine holding up friend?

[@royceabbottsexcavation3709]

New shop is looking shick!🤘🏻

[@FangOfTruth]

I figure this was shot before Covid-19 outbreak in US>I hope it don't interfere withj meet up.

[@wippitywine2]

Finally we see her face

[@wheelerdealer4481]

Great work man love the videos

[@Bytelogicsystems]

Lmfao!!!!!! Loving the price is right voice over!!!! Crackin up!!

[@jorgegonzales878]

I have a 212 stage 1 predator that I order from Go power sport and my go-kart, and I have a $90 torque converter from eBay, and I bought the 30 series torque converter with the juggernaut for $199 from Go power sports, and my car lost power and lots of speed. I went back to the regular sheep torque converter and got my torque and speed back. It was disappointing but then I don't know if I did something wrong.

[@TheShangralaaaa17]

My baja is the same way. Installed a juggernaut and its slower and the belt just slips when hittinfg full throttle

[@jorgegonzales878]

@@TheShangralaaaa17 is there anything that can be done to the juggernaut to get better torque from it?

[@sawyernanook3964]

Sweet

[@ralphy30]

Hey Red beard what type of coil pack did you run on this engine? Did you run the 6500 rpm one or did you have an alternative without a limiter??? Thanks

[@turdferguson1021]

I need the same gas tank. What model Harley so I can search for it?

[@mrs.redbeard4718]

It's linked in the video description.

[@tycoonbob]

@@mrs.redbeard4718 Where any modifications needed to make it work, or did it bolt right up to that top frame bar?

[@WildfoxFabrication]

I was watching this as the earthquake struck Utah.

[@johnnymerritt5969]

You're the man

[@michaelpierce8431]

Is their any advantage using a belt over a chain

[@froggersgarage5127]

I wanna get a juggernaut for my 212 pocket rocket it already dose 54mph

[@froggersgarage5127]

I didnt think i would get a heart thank you and good bless

[@bboyguambomb]

Love your channel!! I just got the tillotson performance engine for my Coleman bt200uex and wondering can I use the stock fuel tank from that engine for the new one? Just ordered the engine today and didn’t think about that part til 8 hours later😅

[@bighomieJ5X]

Thanks so much for putting the big pod filter on the carb,(how it's supposed to be) I don't understand why ppl use that iddy bitty cone one 😂😂

[@drewanderson8279]

When I got my 225 it just came with the small one. I need to fine a was to adapt the large one to the mikuni

[@bighomieJ5X]

@@drewanderson8279 I never understood why it came with that lil filter, the engine clearly needs more air .🤷🏽‍♂️

[@eyeballengineering7007]

@@bighomieJ5X I tried one one time. Restricted the air absurdly on a built 212.

[@bighomieJ5X]

@@eyeballengineering7007 with the small cone filter?

[@eyeballengineering7007]

@@bighomieJ5X Yeah. Not even the tiny one. The one that's like 3" along. It was horrible. Probably fine on a stock, governed engine though

[@regularpit1508]

I have a CT200U mini bike but I want to find a small V-twin engine to fit on it

[@regularpit1508]

I have a one cylinder 14 horsepower motor and I wondered about it

[@mikenordby2866]

Ahhh! My eyes! 15:00-end 😆

[@woofer2121]

If you want vinyl ask Randy. He knows some people.

[@juliesorenson9409]

I wish I had a tillotson 228

[@minibikeboyz5229]

You got a header that will fit the bt200x for me

[@jakesdronelife6307]

Is there a certain start up procedure for this motor? I just got one a few weeks ago it is really hard to get to turn over. Ive tried a mikuni 22. A nibbi 28. Hell I even have a 24 mm flatslide on the way as well my arm feels like it’s about to fall off lol

[@joshuabaker6769]

I just want to say I like your channel it's awesome I've learned a few things about my coleman go-kart and mini bike I still was shocked at the power the improvements gave thanks and keep it up 👍

[@chandlerhester3461]

Why was the belt on wrong

[@RedBeardsGarage]

When they get that wore they start flipping under load

[@briannicolai9276]

You had the belt upside down?

[@jeromemccowinjm]

Can you use the Juggernaut on Big Blocks???

[@jeremydunn2300]

Next year just drain the bowl and put some Klotz in the carb been doing it for years with now issue

[@27Zangle]

So why did build break repeat see very little gain with their new pully? I thought that would allow more top end speed too.

[@coffwalt7038]

God bless up too

[@promow1736]

Redbeard, would a jugg be good on a Tillotson 212?

[@rorikb.6375]

Wich engine is the best a tillotson 212, predator 212cc or a honda gx200?

[@Trains_n_stuff08]

If I had the choice to get a new engine for a go kart or mini bike, I would get the 225

[@MrNosajwhitey]

Awesome sauce

[@datraktorman69]

Need to put Lonnie on it.

[@RedBeardsGarage]

He will be ripping on it the next time he is over for sure

[@fergusonhr]

Dumped the oil upside down fellers...it dont glug, glug with the spout at the top of the bottle

[@larrycoleman8298]

So my gx200 turns 8500 rpm and your saying that the juggernaut pulley will limit my motor to 6500rpm

[@eyeballengineering7007]

No. It's rated to 8500 rpm. I have personally run mine that high. It works awesome for a built engine.

[@larrycoleman8298]

Thanks. eyeball engineering it would be going on my mini drag bike so I don't want to lose any rpms

[@eyeballengineering7007]

@@larrycoleman8298 You won't. Mine hits 6500 under hard acceleration without slipping the belt. Third hole on the secondary spring

[@eyeballengineering7007]

@@larrycoleman8298 Hits 8300 rpm at max speed

[@larrycoleman8298]

@@eyeballengineering7007 thanks I ordered one

[@user-xl9uv3cu6f]

I thought u ned a 40 series for a 17hp engine that juggernaut is a 30 series I'm confused?

[@wesleybanks9965]

Red beard really needing some advice needing the best parts for torque in a 212

[@1texasdad224]

Are you able to put a predator on a Coleman camouflage bike without adding a torque converter

[@roypatterson9910]

Which one is better the Tillotson 212 or the 225, and which one would give me more speed for my Coleman CT200U-EX? Also, how fast do you think the Tillotson 212 cc with the stage 3? Also, should I get a 22mm or 24mm Mikuni carburetor, and will it make it? One other thing, why are you not longer using go power sports??? Will I be making a mistake buying from them??? I want the stage 3 Tillotson 212 cc, and they were the only one who has the stage 3 Tillotson 212 cc engines.

[@RedBeardsGarage]

225 and 24mm carb

[@roypatterson9910]

@@RedBeardsGarage so do you think that the 225 Tillotson with a 24 Mikuni carb will give me more speed than a Tillotson 212 stage 3 with a 24 Mikuni flat side carb? The one guy at go power sports told me that the Tillotson 212 stage 3 isn't no joke, that it should give me a top speed of more like 70 when I asked him how fast does he think it would go, like 50, that's when he said, no, more like 70 mph! I said, no, really, he said yes! I mentioned you and Cars and Cameras, they said that you don't deal with them anymore, which I didn't ask why, but they said that John and Issac are their buddies. So, who do you deal with now? I just don't want to buy shit from go power sports if they're not good to deal with, you know, because I'm Disabled and can't work anymore, I haven't been able to work since 2008 and my money is very limited, I just sold a bunch of my sports cards to get the money to buy a new engine and other things I want, so I don't want to take any chances of getting screwed on $1,500, you know! Google says that the majority of go power sports customers are dissatisfied, which kinda makes me feel like I shouldn't deal with them, but they're the only ones who I've found that has the Tillotson 212 stage 3 engine, and the Juggernaut Torque Converter kit. That's another thing, they show that the Juggernaut Torque Converter kit is only for engines 3-7 hp, and then they sell which I believe is their Juggernaut that's sold separately as just like Juggernaut itself, so I'm not going to pay $189 for the one Juggernaut kit and then pay another $119 for the Juggernaut itself, which is rated for engines up to 18 hp, which is what I would need for the Tillotson 212 stage 3 engine. Thanks. Sorry so long, but I had to explain everything, because I want to know what's the best way for me to go.

[@roypatterson9910]

@@RedBeardsGarage I just bought the 225cc Tillotson Performance engine with the 28 mm Mikuni carb. They said that the 28 mm flat-side carb will work great wtith that engine, so I can't wait to see how much faster it's going to be!

[@roypatterson9910]

I wind up getting the 225cc Tillotson Racing engine with the 24mm flat-side Mikuni carburetor, and I just finished installing everything with the juggernaut, and I tell you what, damn this bitch is FAST!!!!! It's so hard to keep the front end down because it keeps popping wheelies! But it's hard to get started, it takes 5 to 12 pulls to get it started, then you have to open the throttle just a little bit while you are pulling it, if you don't, then it won't start.

[@BonFiredUp1]

@@roypatterson9910 i bought 2 of these from GPS & mine are hard to start as well even when hot you have to choke them

[@freddyvazquez2865]

Tell me now that you’ve owned the Juggernaut for a while, how is it on the belts do you have issues, with them snapping?

[@lizsmith4376]

Hello , great content ... Is this the 225 rs long block ?? If so , do you know if a DC PVL FW flywheel would work ? Its the aluminum unpolished , with a steel core . Ive got it on the predator 224 at the moment . Thanks

[@AngelHernandez-lv7xy]

Do you recommend the juggernaut from go power sports

[@Bluegrasscamper71]

What CVT unit do you recommend for an engine that makes about 20HP and turns 9200 RPM? I’ve got an old Briggs open flathead (.200 stroker), I’m thinking about putting on a mini bike.

[@arigato.collect]

the same one hes using works great. i got it on a 15 hp briggs animal and it zooms

[@fivenightsatgoldenfreddys4912]

Where did you get that mount for the rear pulley on the torque converter

[@kyriacosdavis7781]

I have tightened my side cover bolts on my ducar 212 to 17ft lbs and it spun a couple of them. What do you suggest to do so it doesn’t leak?

[@warriorworkstraining]

Yall need to put a Ninja 250 in a mini bike. Because.

[@ncwarrior62]

Great video guys! Love the new cvt looks like just what I need. Going to install on my old xr 100 frame . She ought to scoot! Thanks for your hard work! Godbless

[@michaelhemmerling4391]

Keihin makes a better carb or go lectron carb

[@raycofieldiv1405]

Hey Red Beard, question. i have a 340 clone with a twister cam, a +.040" arc rod header with a small slip on like you did on one of your builds and a performance filter. i had the shaft cut to 3/4 due to it coming off a generator. the question i have is do you think the juggernaut will hold up to it? its going on my streaker with 18" golf cart slicks on the rear 6:1 ratio.

[@kbakeritsallaboutnobody.5761]

Bald is beautiful

[@sscrewser396]

What tooth setup are you running? I have the jug and am still getting slip on the belt. I dont understand what the issue is!

[@drewanderson8279]

I bought a 225 also I'm having trouble with keeping it running after I give it gas. It idols down but wants to quit. I dont know anything about these slide carbs.

[@SDS-1]

Lady Beard💗💗💗💗

[@srcobra50]

I had no idea that the driver on a cvt was limiting my engine Rpms. I thought my bike just doesn’t have the power. I have stage one kit, governor bypass and a 30 series on my warrior. Hit 49 before having to slow down. So if I were to add a cam, springs and carb would it still not be able to pass 4300-4500 rpms?

[@fatbuddycat]

Hey guys, I built my 196 out with 22# springs, ARC rod, PVL flywheel, 8 degree key, CS grind core cam, billet intake, shorty pipe, Autolite plug, Tillotson PK-1b and a TAV 30. It gets up to speed fast and then feels like it starts to wind out , acceleration decreases and torque drops but the RPMs are still high and the motor should be pulling. I left the stock jets in the PK-1B, is this a starving thing? I'm running stock gears and the TAV 30 is on factory settings. I'm guessing this thing is capable of 7000 RPM and around the 15hp neighborhood, someone else recommended the Juggernaut but I don't think that will help top end pull. It already wheelies and launches hard. Also, it sounds like a two stroke made sweet greasy love to a four stroke and birthed a beautiful baby beast that scares most women and small children.

[@eyeballengineering7007]

It's perfect for that and will get it in the right rpm to pull higher.

[@eyeballengineering7007]

What happens is the driver pulley keeps pinching on the belt even though the secondary pulley is maxed out. This creates loads of friction on the belt as the pulley tension increases. This happens on a stock tav 30. You can buy a spacer that stops the pulley at a certain point, but it's a bandaid where this is a bionic arm. I run a similar engine and it's great.

[@4687878]

What are the wheels on the red bike ? Looks like 10 inches,..I need those for my custom built badass minibike with the Tilly 228cc,..just like that one ,..but 228R ..72mm bore 56mm stroke=228...I haven't changed over from the old 212 predator yet,..need taller wider wheels like those,..please tell where and what kind !!

[@lanezandell7987]

fire vid

[@dmwolanski]

Was the belt (5:00) flipped?

[@RedBeardsGarage]

Yeah when they get that wore out they will spin under power

[@briannicolai9276]

Does the jugernot parts bomb you like a 30 or 40 TC? I spot weld the nut to the engine to the dish slide.

[@briannicolai9276]

Bolt*

[@richardllaine8267]

Better be careful Lonnie that might be your replacement LOL

[@allblackeverything9975]

What did the bike top out at ???

[@nicholasvine9959]

Does that Juggernaut hold up to that much power how's it holding up is it lasting