1958 GMC Column Shifter Rebuild 1958 GMC Resurrection Part 18

[@starrdearma5712]

Thank you, for taking the time to illustrate and show us , how everything.

[@ElderlyIron]

You're welcome!

[@JCYouTuber69]

My dad and I bought a 53 Chevy 3600 before he died back in 19. It was completely taken apart so to me a part-time been a long time backyard mechanic really enjoyed and learned a lot from your video about the three on the tree shifting mechanism. I got a shop manual but watching you put hands on to that thing made it a lot less intimidating. I appreciate all you do thank you very much a lot of your other videos are helpful too.

[@patmillward6911]

Thanks so much for you video. This was just what I was looking for - Shift level repair on 1953 GMC

[@ElderlyIron]

You're welcome, Pat. Getting a factory service manual is the best!

[@jeremymoore2411]

I appreciate your video! I have a 54 Chevy that's getting stuck in 1st gonna try some of this you done.

[@woychck4]

What an nice Christmas present, another great video. Thank you. Awesome fix.

[@dfross87]

Couldn't agree more. A bit late in the day over here in Australia, but I decided that I HAD to watch it before going to bed. And I'll watch it again in the morning while I have brekky.

[@tek4]

Best darn Christmas present I could ask for. Thank you for all the work you do, and teaching a youngin like me and so many others the mysterys of old iron

[@johnscally255]

Happy Holidays and Merry Christmas to you and the Family.Thanks for another great video sir. Cheers.

[@DannyWalker1949]

Man oh man, this did bring back 0l' Memories to me.....work'in on this shifter on these 0l' Shimy-o-let's Shifter's 😳

[@lewiemcneely9143]

I just got everything in neutral, ran a nail or something through the rails on the box after I greased it up and slid the rods to fit. Never worried about the flop and slop. Was scared if one didn't have it. Still am!

[@outcastprojects6733]

Good to see you getting her done.Merry Christmas buddy!

[@lovefordgalaxie]

Had a 1973 Chevy Veraneio, with the exact same shift lever, and the very same shifter main control box on the column inside the engine compartment. Mine would jam when changing from first into second. It was the shifter box (from where the two main shift arms come from) that was worn. One was supposed to fill her up with special lithium soap grease every year or so, and nobody ever did that. The main shifting arms inside the box have a notch for a tab conected to the linkage that comes down the column from the actual shifter lever inside the truck. Mine were all rounded due to wear, and the entire thing wold jam when changing from the rear shifter arm (First and reverse) to the front shifter arm (second and third) inside the box. I had to buy a new one, that was actually cheaper than having mine rebuilt. Never had problems on the shift lever like the ones you found on yours. Mine had a plastic material bushing on the head of the arm where you used a rubber fuel line. It was just prone to loosen the two bolts that keep the entire thing connected to the column. Now i'm having a similar problem with my Galaxie. If you are not careful, it will jam from first to second. On the Galaxie's case, i'll have to rebuild what would be the shifter box on a Chevy, as the system is integrated into the steering column. There is no separate lever going down into the engine bay. Everything is inside the column itself. That will be some patience test...

[@rdsledge]

Oh wow! Timmy and the gang! Love it!

[@paidintheshade]

It sounds like you’re Working through the not so great weather I’m from south Texas and if it’s ain’t 99* it’s humid and pretending to be cold out.. that being said my hats off to you good sir for getting it done

[@ericruiz2174]

Mega Like!

[@SuperMAZ007]

I remember adjusting and repairing 1958 GAZ-M20 "Pobeda" shifter, linkage it was a pain to say the least. No wonder people but the shifters directly to the floor. But I liked the column shifter so much I do not regret the time I wasted doing that job.

[@lovefordgalaxie]

Great car the M-20. I'm more into the M-21 Volga, but would love to own a Pobeda.

[@GrandsonofKong]

Excellent Red Neckery Field Fix if I do say so with that section of rubber hose!Hope you had a very Merry Christmas!

[@ednaldoinaciodasilva2060]

Esse vídeo me ajudou muito, obrigado!!!

[@ElderlyIron]

Você é bem vindo. Se inscrever!

[@laurenceburnham1028]

Merry Xmas matey and enjoy the new year celebrations . Thanks for all the time you spend doing the video's, we really appreciate them here in Borneo :)

[@mrfrog3350]

Merry Christmas Jeff. I bet the enginerds never woulda thought of a fuel line fix for that shifter.

[@danteomar653]

Muchas gracias

[@RobertPerrigoOkiechopper]

Nice fix Jeff.

[@jime386]

2 : 53 am ..... Christmas morning, Santy didn't come. So I''m watching this. Merry Christmas to you, the rooster and Timmy

[@MRrwmac]

Hope this winters snow doesn’t damage any part of your shop(s)!

[@tombob671]

Merry Christmas, Jeff

[@mostlymoparih5682]

Shift shaft. Say that fast three times. Almost as good as Unique New York. Nice hope you have a great Christmas day.

[@lewiemcneely9143]

Say W H A T???

[@mostlymoparih5682]

Shift shaft, shift shaft, shift shaft. See. Now the other one. Unique New York, unique new york, unique you nork. Dang see what ya made me dew Lewie.

[@lewiemcneely9143]

I was going to tell you yeu ought to quit while yew waz ahead but I wuz 2 slow.

[@mostlymoparih5682]

Quit? What does that mean?

[@lewiemcneely9143]

Something everybody's wanting me to do. Obviously I don't know.

[@userunavailable3095]

Just like fixing vacuum cleaners: cleaning and lubing will fix many to most problems. Occasionally, you need a part.

[@robertthornhill4379]

hi good job 10/10 bob in the uk

[@jamesmccarthy1961]

Merry Christmas Jeff to you and your family. It's a white one here in Mass.

[@GarnettM]

I rememeber the old man shifting the truck without the handle the cup got soft so the side pins would`nt hold , He sold it and got a 64 chevy stepside truck might have been a unibody and every time you turned left whoever sat in the passenger seat while leaning on the door it swung open having you dandling from the door in traffic HA HA HA,, Ah the good old days when it was just part of life to be thrown into danger as a daily adventure , Then hearing Don`t tell Mom and the first thing you done was ---TELL MOM .

[@juansarabia7530]

If you need shift rods, get small gage rods and bend them to shape. Then, bend the big finish rods to match. Now I will work the big rods.

[@ustinman8446]

Merry Christmas Jeff!

[@johnrw2012]

MERRY CHRISTMAS/ HAPPY NEW YEAR

[@nrgate]

Wonder what the whole story of this trucks life was? " Yep , Ike, that thar tranny is what is wrong, not the clutch. It just dun blew up" pointing to wrong blown tranny in the truck box, while the original good tranny is in the back of the shop. "Can you fix it Joebob ?" "It'll cost more than the truck is worth. I'll give you 50 bucks fer it" " 50 bucks? naw my kids was born in that truck. Ill tow it home." (the bent steering linkage) And that is where it sat in the pasture until we see it here..............

[@vernonslone8627]

hey Jeff I think those grooves in the shifter shaft should probably be packed with grease like you do on throwout bearing collars...

[@jameslea338]

YES, THE DRIPPING OF WATER HAS THE SAME EFFECT TO ME JUST LIKE PAVLOVS DOG HEARING A BELL. EXCEPT THE DOG CAN GO ANYWHERE.

[@myalaskalife5837]

Love old chevy trucks but man thay had some problems.. I am ford and chevy all the way

[@semor-rv9rk]

got it and yep there on backwards O fun fun nothing like due it twice

[@davidgaylord2035]

67 chev pu 3 on the tree was forever getting hung up under the hood a hammer came in handy

[@zx8401ztv]

Loverly job, i like the use of rubber tube, a smart replacement :-D All the slop is gone and smooooooooth shifting again lol :-D Hope you have having a smashing xmas jeff :-)

[@bobsillas3553]

I have spent so much time trying to fix that column shift I hope you get it I put a floor shift in I met Tony in SAN Jose just be for he moved there small world

[@RexCars1]

RNR.... Much better than Gears,,,

[@williamvandorn4724]

Any tips on getting the lil spring and pins to stay in place when trying to get the lever back together? I have to be 30 tries in and the darn spring keeps slipping out.

[@ElderlyIron]

If you are trying to do it in the truck, I highly recommend pulling it out and going through it on the bench. (Or tailgate like I did!) at 3:34 shows the spring. Both pins (caps) have holes that the spring sets into. 5:45 to 6:05 shows taking it apart and seeing the caps setting on the spring. At 10:45 is the re-assembly. A good slathering of heavy grease in the holes of the caps themselves and the holes where the caps (pins) go in will prevent them from falling out until you can get your thumb and finger on them to squeeze them together to push the housing over. Again, I highly recommend doing the entire procedure. I have never felt such a tight, well working column shift until I did this repair. Use care with the carb cleaner, as prolonged contact will mar the paint. I any event, get all the old grease out. Flush it out with the garden hose nozzle until you can't feel any more grit. Blow it out and get as much fresh grease in there as you can.

[@williamvandorn4724]

@@ElderlyIron Wow! Thanks for such a thorough and timely reply! I definitely dropped it on the work bench first thing. Ill give the grease a try to keep the pins in place. What keeps happening is that when i push the pins in the spring also pops out. Wondering if I should try replacing the spring or if I am missing something.

[@ericruiz2174]

Hi I need to replace the column collar on my three on the tree 54 chevy because its not holdingit in place any more the bolted part. I need some advise to unmount it and install the new one. I saw you bolting it back but it didnt show the unbolting below the steering wheel before starting, how its done.... I just order it... Thanks for all your teaching!

[@ElderlyIron]

I don't see bolting it back anywhere in this video, and I'm not sure which collar you are talking about. There are 2 #3 phillips screws for the rod clamp. There are two 5/16 bolts (1/2 inch wrench) for the steering column mount and 2 clamps where the rods connect.

[@ericruiz2174]

@@ElderlyIron after reinstalling the retainer with the piece of rubber and so, it fast forward you screwing with the hand the column collar... Going down to the trany, theres two bolts... Shoul i mark before unbolting the top bolt so we can pull the whole piece to remove the old column collar and replace it with the new one... Mine is the same as the one shown in this video... But its a 54 chevy 3100... Im new into this and learning...

[@ericruiz2174]

@@ElderlyIron any email where i can send you a photo of my column collar so we are both in the same page?

[@ElderlyIron]

[e-mail] chevy.oldcarmanualproject.com/gmc/5559mm/5559mm582.html

[@ericruiz2174]

@@ElderlyIron mega thanks!

[@davidtorres9273]

On My 3 on the tree, it pops of 2nd when excellerating. If disassemble, and clean, will it help?

[@NebukedNezzer]

just wait till you get the H pattern box apart and see the mess in there.

[@Thevinylking69]

How many different gear boxes were there in '58. Is it a light duty v.s. heavy duty gear box difference? Were they all Warners? It seems like there were 3 different styles that you encountered or maybe 2 but with different parts.

[@ElderlyIron]

My guess would be a per application situation. One transmission came from a step van, so the side cover would be made to match the the way the linkage came from the column. The Warner was not period correct, as it has the trans mount on the tail shaft housing

[@ericruiz2174]

Hi Hope you are doing well. My "AC FUEL PUMP" on the 235 i6 engine on the 54 chevy, is vomiting gasoline thru two little holes it have on the bottom back side, the side connected to the line that comes from the gas tank. The other two holes on the bottom front side are sealed ok. Since you are a very experienced in this matter, thats why im asking for your advise on this situation. Please help. Thank you!

[@ElderlyIron]

If you have the rebuildable type, the kits are available. Your diaphragm has gone bad and it's blowing fuel out the vent holes.

[@ericruiz2174]

@@ElderlyIron Can i get a new one? As far as it says 235 i6 chevrolet engine?

[@ericruiz2174]

@@ElderlyIron the ones i saw so far dont have vent holes... Is that necesary? Or i can install one without the vent holes?

[@ElderlyIron]

They all vent somewhere. Send a photo to [e-mail]. They're not hard to find. It just as to be shipped to P.R., doesn't it?

[@ericruiz2174]

@@ElderlyIron ok here's some specs... Carter M2999 1958-1962 Chevrolet 235 6 Cylinder Engines Mechanical Fuel Pump Fits : 1958-1962 Chevrolet 235 Engines In Cars Trucks ( May Fit Other Years ) 1 Threaded Inlet 1 Threaded Outlet For Vehicles With Electric Wipers - ( No vacuum fittings ) Use The Compatibility Guide To Find Your Application Message Us With Any Fitment Questions See Our EBAY STORE For Your ENGINE And PERFORMANCE Needs Free shipping to PR... $38.98

[@noname-gr7lf]

Can you please tell me what the cover of the book looks like in this video? I see it says, "GMC MAINTENANCE MANUAL". I have a 52 chevy truck. Bought the 52 GMC Maint. Manual, but didn't see the exploded view you show in the video. I need more exploded views, and think your book can be helpful. Thank you. AE

[@MrFakit]

Timmy wants to do some plowing

[@dunlopkuhmoii7025]

☕️👋⚖️

[@ellesmerewildwood4858]

Merry Christmas, Jeff to you and your family. Now, what's with the goats ? What the heck are they doing ?

[@semor-rv9rk]

Hey Im working on I think its a 1980 C70 dump truck back brakes I need to know how the brakes go on had it a part for 3 months I cant remember if the front shoe goes up or down or hi or low the shoes are the same but you turn one to make it long if jeff or some one can help me thanks

[@theda850two]

semor 1295,, "Big boys in the back" referring to the shoe with long lining goes toward the rear. If that is your question.

[@shartne]

nice fix but I hope the homemade rubber bushing dont crater on you because then you have to take it all apart again. I wonder if you can even order the right new one anymore?

[@somerandomguy3868]

You didn't take us for a ride, show us how it's working ☺

[@TheShadeTreeFixitMan]

Drip, drip, drip, drip...old Chinese torture trick to mesmerize your viewers. OR Musical metronome to make sure you work in perfect rhythm to accomplish the the shiftiness of the project.

[@Kickinpony66]

Timmy spits???

[@DannyWalker1949]

0h Bye the Way, Ya better watch 0l' Timmy or he'll start pee'n on his beard........🐐🐑=⚠

[@ronaldhineman]

Merry Christmas Jeff!!