1963 Vintage Signal Horn Restoration.

[@AJRestoration]

Thank you for stopping by! I really hope you enjoyed the video, if you did please hit that like button and don't forget to subscribe for the latest videos! All the best and stay safe!

[@restaurandocoisasvelhas]

👍👍🙏 Very nice work.👏💯💜

[@davidmwendwa3535]

@@restaurandocoisasvelhasyou get were

[@davidmwendwa3535]

Where you get

[@Cradley684]

Great friend, that should wake the neighbours up LOL, have a nice day !!!.

[@lolcec81]

Комментарий в поддержку ролика и канала, а также труда мастера.

[@audinos1840]

European alarm horns typically have downward-pointing horns with a slanted bell. American horns usually point straight forward or have two horns pointing in opposite directions.

[@JollyRoger2408]

Very well done. 👍 Considering the size of the horn, I would have expected a more powerful sound.

[@rashton5730]

Very nice, the air gap between the plunger and pole needs a bit of adjustment but it turned out great. Oh, and as I learned many years ago in the jewelry business, respect the buffer! it will bite you hard if not careful, especially necklaces & watches..... take them right away from you in a split second, never had a finger yanked off by a chain but had a few watches snatched and turned into bits and pieces :D

[@AJRestoration]

That is correct, It changes the tone of the horn. Yes I have had a few grabs by now, especially on the edge of something, sends it flying.

[@malum4342]

Thanks for the latest Left Thumb Health Report. Visually, it can be said that the patient is on the way to recovery. Trauma does not affect the quality of the work performed. All the best.)))

[@AJRestoration]

Thank you buddy! Damn thing is taking forever!

[@danielkelly32]

Beautiful horn

[@AJRestoration]

Thank you very much!

[@abo_fhad]

توقعت أن الجهاز بوق لكن في نهاية المقطع لم يصدر الصوت العالي المتوقع فشكيت فيه حتى قرأت الوصف . شكرا لك مقاطعك متعة حقيقية

[@AJRestoration]

كنت أيضًا مفككًا قليلاً بسبب الصوت الذي يصدره. عندما حصلت عليه اعتقدت أيضًا أنه نوع من بوق الهواء أو شيء مشابه لأبواق السيارات القديمة. لكن شكرا لك على التعليق ، أنا أقدر ذلك حقًا

[@robertovillalobos4798]

Excelente trabajo 👍 como de paquete y el rojo le quedó espectacular y regreso al trabajo a sonar otra vez. Saludos desde Venezuela Ciudad de Maracaibo

[@TheParkAttendant]

I want to thank you for this one.l have an old truck with a beep beep horn that has stopped working. You have showed me the way to repair it. Thank you ever so much.

[@rickyabrahams7100]

Background birds,wire colour code and 3pin plug, South Africa. Awesome restoration mate👍. Greetings from Australia 🇦🇺

[@AJRestoration]

Tanks mate. Glad you enjoyed the vid.

[@TheParkAttendant]

Did your neighbors appreciate the test stage? Good times was had by all

[@timtoulson9662]

Very nice job, thanks. If I could suggest your soldering skills could use a little development. Thanks Tim

[@AJRestoration]

Thank you, I have pretty good soldering skills, these joints don't need too much finesse. They were soldered solid. But thank you for your comment and compliments! Much appreciated!

[@johnriggenbach2999]

I don't understand why you have so few subscribers. This is a great site.

[@harshabiliangady3211]

Job well done with great patience. Would have loved a green colour though.

[@AJRestoration]

Thank you! Cheers!

[@vinceianni4026]

Hello A.J beautiful restoration good job well done

[@AJRestoration]

Thank you Vince! I appreciate!

[@limrc1]

Nice! Would be wonderful if you can measure how loud it is with an app that measures in dB. Thanks for sharing.

[@AJRestoration]

Noted!

[@franzotto448]

Das ist eine "Jetzt aber wieder an die Arbeit Tröte" It's a "get back to work" buzz ☺ 23:30 Löten ist nicht deine Stärke, nimm das Nächste mal einen 60 Watt Lötkolben für diese dicken Drähte. 23:30 Soldering is not your forte, next time use a 60 watt soldering iron for these thick wires.

[@Shahje777]

Very nice work

[@AJRestoration]

Thank you! Cheers!

[@restaurandocoisasvelhas]

👍👍🙏 Very nice work.👏💯💜

[@RobertoRMOLA]

OK. But when will you adjust the points gap and make the horn sound as... a horn?! This video deserves a part 2!

[@AJRestoration]

I should have done some more test footage! That adjusts the tone and loudness of the horn yes.

[@andymiller5611]

Great video and a very nice restoration! Keep up the good work, dude! 🍻🤘💜

[@AJRestoration]

Thank you very much!

[@WonderfulSkills]

Great

[@AJRestoration]

Thanks!

[@samuelfellows6923]

An electric horn - would be put on a vehicle and used as a horn/multiples of that in a commercial building, war bunker as part of an alarm system - a sounder

[@AJRestoration]

I have seen this type of horn was also used in some submarines, and pit telephones. I love it!

[@agustiarhidayat5777]

Good job bro 👍

[@AJRestoration]

Thank you so much 😀

[@karenmanager1350]

Could someone explain the layered metal strips? Do they vibrate to create the sound? Also, while I love the powder coating, was hoping for a Hammerite finish.

[@AJRestoration]

That is correct. Loosening or tightening the layered metal strips will change the sound it makes.

[@bhagubhaimistry626]

Best

[@dimitrischwarz9246]

Сделал все супер 👍но нужно регулировать звук.

[@AJRestoration]

Thank you buddy!

[@MARKLOCKWOOD2012]

Need an impact driver and thing of evap o rust safe hands 🙌 re use over and over. Theirs gonna be project that your gonna need more umph.

[@AJRestoration]

Most definitely. Thank you very much.

[@ЭйтнСалазар]

but what about the test launch? meaning from the fact that it was repainted and did not show performance?

[@AJRestoration]

27:20

[@ЭйтнСалазар]

@@AJRestoration wow, sorry, on this timing, I got 2 banners and I skipped the video.

[@rushedscheduledfun3963]

What media do you use? Looks like crushed walnut Thanks

[@AJRestoration]

It is a silica sand.

[@KISSFanDan1995]

That’s an old Czech level crossing signal horn right?

[@AJRestoration]

I am not sure actually, but I would imagine that is where it came from judging by the way it looks, and sounds.

[@jffgrnlw]

Really enjoyed the video. What is the make of you soldering iron.

[@AJRestoration]

Thank you! That is a model TS100 From a company called MINIWARE here is the link to their website. www.miniware.com.cn/product/ts100-soldering-iron-b2-tip-hot-air-soldering-station/

[@mirahorn6799]

👍👍👍

[@AJRestoration]

👍👍

[@mobilityxstore]

I went to buy some camouflage trousers the other day, but i couldn’t see any?

[@AJRestoration]

camouflage trousers? where? Haha

[@mobilityxstore]

@@AJRestoration fancy doing a colab?

[@robertmonroe9728]

25:40 wrong rotation 180 degrees!

[@AJRestoration]

Eagle eye, the customer preferred this way due to the mounting position.

[@robertmonroe9728]

@@AJRestoration Аh, clear. So, this is not a bug, but feature :)

[@lrzktm1]

Hi, What is this Pen welding?

[@AJRestoration]

It's not welding, it's a soldering iron. I just connected the wires to the terminals using the soldering iron and solder.

[@lrzktm1]

yes yes I know what it is but in French 😅

[@陳金松-u9o]

警笛喇叭。

[@laszloszekeres2920]

😂😂😂😂

[@AJRestoration]

😏

[@hilltopgypsy]

So sorry to say, but as you might be able to tell by the sheer over-whelming number of comments; boring. Thanks, but there was just nothing interesting about this rebuild.

[@AJRestoration]

Thank you for your time and input.

[@hilltopgypsy]

@@AJRestoration Thanks for your response. Glad to see that you weren't offended. It won't stop me from checking out your videos in the future!

[@AJRestoration]

It's going to take a lot more than that to offend me haha. I am glad you will be sticking around, I really appreciate it!

[@DrRestoration]

Nice horn!

[@AJRestoration]

Thank you!