1968 MGC Door Glass - Complete Rubber Refresh [Part 1: Removal]

[@royceberry9114]

Thank you for the step by step, it definitely made the job easier on my 67 MK1 MGB. Regards Royce.

[@JRsGarage]

My pleasure, happy to help.

[@richardowens9170]

Very helpful. Getting ready to tackle this job myself. Thanks for the guide.

[@JRsGarage]

My pleasure.

[@jameshopper9360]

Awesome video thanks so much, followed step by step and worked a treat. Many thanks 👍

[@JRsGarage]

My pleasure, glad it worked out for you.

[@ianwashere12345]

Thankful, useful to me. Doing this today.

[@JRsGarage]

Happy to help.

[@drkvj]

Super useful. Thanks man!

[@JRsGarage]

My pleasure.

[@windmill1965]

Thank you for making this video (and part 2, the install). I have an MGB and need to replace the triangular-shaped rubber seal (a.k.a. gasket) around the vent window. Seeing the steps you took make me more confident that I will be able to do that job. My question is: can I do this without removing the entire quarter light assembly from the door frame? From watching your video I get the impression that I could do it in the following way: Remove the door panel to get access to the spring-loaded stud. Remove the nut and spring from this stud, with the quarter light still mounted in the door (as shown from 12:30 onward). Then remove the vent window from the quarter light. Now I have access to the rubber seal and can replace it (which I couldn't see in detail in your video). Then re-assemble in reverse sequence. Would this work, or am I overlooking something?

[@JRsGarage]

Sorry I haven't responded to this yet. You might be able to do it that way. I remember having a tough time pressing the window into the seal so that might be tricky without removing the frame from the car. Let me know if it works out for you.

[@KenBailey-wu5lu]

Can you tell me what service manual you are using

[@JRsGarage]

Amazon - www.amazon.com/MGC-Workshop-Manual-Official-Handbooks/dp/1855201828

[@AliKhan-dh6sj]

Hello, could you please tell me how to open the bolts of the vent .

[@JRsGarage]

I'm not sure what part you are referring to. Could you send a picture to jrs.garage.mgc(@)gmail.com?

[@martygreen9714]

What service manual is that? And where did you get it?

[@JRsGarage]

Amazon - www.amazon.com/MGC-Workshop-Manual-Official-Handbooks/dp/1855201828

[@billadams5194]

Not Philips. All Pozi Driv. Using a Philips on Pozi heads will strip them out.

[@JRsGarage]

Thanks for the correction.

[@robingibson7503]

Use a piece of tape instead of sharpy. My marks rubbed off.

[@JRsGarage]

Thanks for the tip.