1971 20 Hp Johnson / Needs Juiced Up / pt 10

[@VernonTate-y1i]

Great job and I will see you in the morning 👍🏻🤘🏻

[@THISOLDOUTBOARD1]

Thanks again for Tuning in!

[@scubalurefishing]

Hot cup of coffee and This Old Outboard early Sunday morning, perfect!

[@THISOLDOUTBOARD1]

Hahaha! Thanks again !

[@adwyfriangliga8483]

Finaly , wonderful sound ! 👍🤝

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in! I think she'll run! Stay tuned !

[@jasper60103]

Awesome to see it fire w/o the hard pull. Great job! There’s light at the end of the tunnel. Great video and thanks sharing. 😀

[@THISOLDOUTBOARD1]

Hey Jasper. Thanks for tuning in. You never gave me the shipping number, haven't seen anything yet. It may be here, mail on fridays comes in late and they drop it off at the managers address. Then he delivers it on mondays. Pain in the azz! Hahaha Thanks again !

[@jasper60103]

@@THISOLDOUTBOARD1 Seems our wires keep getting crossed on the tracking number. 9534615867414155767066 Anyway, I just checked. It shows delivered on Friday, June 7 @1:31 pm. Please Let me know when you get it. Thanks.

[@THISOLDOUTBOARD1]

@@jasper60103 Sweet I'll should get it tomorrow ! Thanks again !

[@THISOLDOUTBOARD1]

Hey. Just got the box! Haven't opened it yet. Thanks again !

[@jasper60103]

@@THISOLDOUTBOARD1 great news. Enjoy

[@manuel-o1x7d]

you finally got the motor running,i been watching you messing with that motor and im glad to see you got the motor running ,good job

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in. Its not "running" yet but getting close! I think she's gonna run! Thanks for Hanging In & Stay Tuned !

[@mikedurhan9941]

Congratulations, Ol' Scout!

[@THISOLDOUTBOARD1]

Hey Mike. Thanks for tuning in. Ol' Scout? Hahaha LMFAO! What am I a horse. Hahaha not kidding LMAO. Thats so funny in a good way! Thanks for cracking me up. I needed that. Stay tuned Brother!

[@randymiller1604]

I knew you could get it running it wasn’t easy but you didn’t give up nice job 👍

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in. I'm getting close! I think she's gonna run! Stay Tuned !

[@OldMysticFantasist]

Boy, you are one stubborn, er determined old cus, but SHE FIRED. 😁👍

[@THISOLDOUTBOARD1]

Hahaha. Thanks for tuning in! I think she'll run! We'll find out! Stay tuned !

[@TheSteelworker]

The importance of “match marking”. I would’ve put the housing together dry and mic’d every O.D. on the bearings & I.D. to make sure the running clearances were right and the bores lined up. Could still be binding a little from the dowel pin holes. Although I agree it looks like someone honed it out with a file. 🤣🤣 Good video! 👍

[@THISOLDOUTBOARD1]

Hey Steele. Thanks again for tuning in. Too technical for my dumb ass! Hahaha I just want it to run! I think she will, if not, got some more good parts! It's been a refresher course. I'll go a couple more rounds. Ding Ding! Hahaha. Thanks again & Stay Tuned !

[@TimsWorkshopTJY]

Hi TOO, Wow it finally started up and sounds good.

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in. Getting there! Stay tuned for the next episode !

[@carpetgeniepsl]

I am so lucky that I live across from you. You're like "The Old Man and The Sea" So committed and I've learned much from you.

[@THISOLDOUTBOARD1]

Hahaha! U B D! Hahaha! Thanks for tuning in!

[@wish2fish37]

Another great video series.I never would have picked up on the poor honing.Those pins where a great catch also.You never know what you will run into when working on old equipment.Expect the unexpected!

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in. Yes, never expected all this, same with the clipper boat! Damn! Hahaha Fun Fun Fun!

[@smallengineexpert6607]

l learn every time i watch your video's, keep um rolling!

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in. Just telling my story. But comments like yours make it all worth it. Thanks again !

[@tonyaurora6649]

Nice job man ! That was a pain in the arse !

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in. Yeah kicked my ole azz! Thanks again & Stay Tuned !

[@randyyoung9892]

I was always told although manufactured in mass the case halves were a set machined together. I put a hole in my V6 and replaced the whole block. I can imagine if you ease them together and don't force the taper pins they could match 👍 Nice work as usual Thanks for taking us along in your adventures

[@THISOLDOUTBOARD1]

Hey Randy. Thanks again for tuning in. Just telling my story. I think she'll run! We'll see. Stay tuned !

[@artstates960]

If you stick with it, the answer reveals itself. Nice detective work on this one! TOO does it again.

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in! I'm workin on it! Thanks again !

[@melvinrawlings1457]

Hell yea brother keep up the great work. Much love to ya from Maryland❤❤❤. I need to get out there and hangout with ya. And u can show me around and possibly get some fishing in.

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in. Let me know so I can make time. Bizzi Bizzi Bizzi! Thanks again & Stay tuned !

[@4069ish]

I have a motor that I have been working on for 4 years now. I m currently on a break from it. It was giving me a defeated feeling lol.

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in. Wow 4 years! I'm not even gonna ask. You got it! Thanks again & Stay tuned!

[@alberthafner2194]

With mismatched cases, skip the tapered pins and try centering cases while slowly tightening bolts.

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in. Yeah thats basically what I did plus put the pins back in. Thanks again !

[@carpetgeniepsl]

This is Corey @ 4:28 If any of your viewers were living near you, they would love to watch you do your thing.

[@THISOLDOUTBOARD1]

Yes I/we know! Hahaha you crack me up! Thanks again !

[@mwatkins2464]

YOU DID IT MAN!! Great work on finding the issue!! Question, the spring you installed at 13:00. , what does it do?? Still need longer videos, I really enjoy watching you do this stuff 👍

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in. That spring holds the seal in. Stay tuned for the next episode !

[@kenleydixon1365]

👍🏿❤️

[@THISOLDOUTBOARD1]

Thanks again !

[@t.j.h2810]

Sell that thing ASAP.....to someone living out of state that won't be coming back to Florida anytime soon. LOL

[@THISOLDOUTBOARD1]

Hahaha Thanks for tuning in. Not yet! If she don't run, plenty of good parts! I think she'll run! Stay tuned !

[@Dan_Akins]

If you’re still having to pull on your Johnson after it is juiced, you might be doing something wrong to make it fire!!

[@THISOLDOUTBOARD1]

Hahaha. Thanks for tuning in! I want it to fire twice! Hahaha. Thanks again & Stay Tuned !

[@Guns_N_Gears]

You mean your Johnson doesn't have any juice, so your going to juice it up???😅

[@THISOLDOUTBOARD1]

Hahaha. Thanks for tuning in. Gotta have your Johnson juiced ! No dry Johnsons around here! Hahaha. Thanks again & Stay Tuned !

[@seniorLu48]

I can't wait for your next video, I'm looking to tear down my 1969 20hp running into same issues as you have with yours. I'll find out what's going on once I get inside of it. Gracia again Amigo.

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in! Tear it down! Hahaha. Thanks again & Stay tuned !

[@timfairchild6892]

Nice work! So ot was the taper pins screwing things up?

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in. The pins wouldn't line up after torquing the crankcase down. The crankshaft wouldn't turn freely. Thanks again & Stay tuned !