1979 Ford F250 Compound Twin Turbo Cummins 6BT Swap - Part 3

Here we go on Part 3 of this 1979 Ford Cummins diesel conversion!
Check out that playlist here:
• Ford F250 Twin Turbo C...
Today we'll cover:
Intercooler installation details
Transmission core support
Shift linkage
Exhaust
Fuel system plumbing
Transmission cooler lines
Doing a DIY diesel swap? We’ve got you covered!
GM DIESEL CONVERSION
adventurevehiclesnw.com/shop/...
LAND CRUISER DIESEL CONVERSION
adventurevehiclesnw.com/shop/...
UNIVERSAL DIESEL CONVERSION
adventurevehiclesnw.com/shop/...
Find some of our favorite gear on our Amazon shop: amzn.to/3J3KihN
#AmazonAssociate - We earn a small portion from qualifying purchases.
Thanks for your support!

[@kleinbiker1]

Maybe mount the FASS system on some rubber isolators? I'll bet the vehicles frame amplifies it's noise.

[@Ironhead8684]

The fass is definitely a loud pump. In my application the pump is installed a little too high above the fuel tank and when the fuel is drained to service the filters it takes awhile to prime the system and I found it creates an air bubble on the suction side of the pump which compounds the noise

[@maleklopez3760]

What transmission does it have and did you need to make any adjustments to the cab? Any info would be appreciated

[@jimkillen1065]

Nice job .when it comes to linkages keeping the levers and the sweep area of them correct can be a challenge. Experience here helps for sure .

[@JohnSmith-qj4cf]

Can you tell me about the transmission thks

[@fordmuscleluis9710]

Glad you got this dentside ford F250 Running I can't wait for part 4 soon

[@salvatoreplont8459]

Nice build as always. Do you have a list of all the parts you specifically fabricated for this build and if so do you sell a kit?

[@ajyoung2191]

Any diagram of wiring harness are did you use the ford harness just curious have my own build going on and need few ideas on wiring situation

[@trumpetman2006]

I had a fass titanium on a 24v and never had it that loud. I currently have a air dog on a common rail truck and it’s about the same has my old fass and is way less loud than yours seems to be.

[@fiero11]

I've never heard a FASS pump be that loud. Was it run dry for a long period?

[@jerrywinstead4177]

What kind of adapter between tranny and tcase

[@Jonesys]

Advance adapter spline coupler and a modified clocking ring.

[@TravelAlongAdventures]

Wanna sell that truck!!?