1980 SQUAREBODY 4X4 Build. NEW fuel system, Brake Overhaul, and MORE!

Lets get some more done on Ol Roy for dad! We appreciate the constant support and I hope you guys enjoy the video!
MERCHANDISE AVAILABLE AT
puddinsfabshop...
SECOND CHANNEL
/ @puddinsfabshop2
PATREON
/ puddinsfabshop
INQUIRIES EMAIL
[e-mail]
INSTAGRAM
@puddinsfabshop
SUBSCRIBE! ((THANK YOU GUYS FOR THE CONTINUED SUPPORT!))
#c10 #k10 #olroy

[@KarinesGarage]

On my project truck on my channel , i had never even done brakes, much less bearings. And mine is a 4x4 as well. It took days researching how to do it and figure out the right parts and tools for the job. Helluva job for a novice like me but I managed! And I never would have done it had you not inspired me! ♥️

[@GregoryJohnston77]

I am so glad Hotrod is your mini-me sidekick. Hers sure loves her dad.

[@The-Deadbolt-Deputy]

I’m a locksmith and I do jobs all the time for banks on foreclosed properties and one time the bank had me re-keying a vacant house that WAS NOT IN FORECLOSURE and the homeowner was PISSED !!! And he should have been cuz the bank made a big mistake. Ever since then I’m always asking the bank to please double check and make certain because I don’t trust em anymore. What a dam mess. Oh,…. I love ole Roy and the color is different and I really like it. Thanks Puddin

[@coreyandkristi]

Thanks keeping that special moment in the video, Chris!

[@rabidcoyote97]

“Hey Ma, Puddin gave Old Roy a stiffy!” Thanks for the laugh! Been a long day and I needed that!

[@joejohnfanning1637]

Somebody please send this man a wipple charger for ole Roy

[@HayesTransport]

He makes thousands of dollars, I’m sure he could afford to not piggy back off a viewer.

[@Perpetualnerd63]

Ok, I just ordered grey button up shirt. Don't usually spend much on shirts, but this looks like a quality piece.

[@leehuntley189]

When you said "hey ma! Pudding gave ol Roy a stiffy!" My yoohoo I was taking a drink of spat out all over my wall and floor!

[@terpianajones]

5:51 😂😂😂😂 thanks for leaving that in Chris!!!

[@k20Fritz]

thx chris lol

[@jacksonbennett6151]

Speaking of gas and o-rings…

[@djpoopypants4741]

Always does!

[@HackeryX]

Hotrods throw was on point. Theo pulled the old snatch and grab

[@ChrisZemek]

Hot Damn!!!! its Puddin's Fab shop Time!!!!!! oh snap!!!! i am gettin me one of them there new fancy shirt's.

[@douglasfowler2899]

I just ordered the pudding fab shop blue

[@FNAFmaster2008]

Those button-up T’s are also great for work wear!

[@steveperyer4850]

A very real good project and it’s Puddin Time😊

[@frankavellino6659]

3:22 When Hot Rod says the real "sitting on..." saying.... you're in trouble 😂

[@Freedomquest08]

Hate to tell you this Puddin, but under the 6 bolts on the spindles there are important bearings on the front axle that you missed. They on the insides of the spindles for the outer axle shafts.

[@TimothyTarbutton-o3t]

Great video can't wait to see it when it's done

[@stevem3413]

Puddin time finally time to learn something new and be extremely entertained at the same time. Now I know me and puddin have something in common no quiting figure it out and make it work 😅

[@80LittleJohn13]

Hot DAMM! mean Green machine don’t mess with old Roy Fun day starting the week off

[@jgott1745]

Video went up an hour ago and you’re already out of the 3XL button up shirts. DANG!!

[@tfoley455]

All gone now apparently

[@mrV8manifold]

Fired Up for some Ol’ Roy Ack-shen…

[@2koolchris291]

60 likes in less than a second since the notification. Cool. Also just had my first day at a new job, went well. I like it so far. Nerves are getting to me though but I’m getting my way along

[@douglewis3182]

Everybody feels that way starting a new job. Give it a week or so and it'll be business as usual brother

[@1onelyone]

Hold on bruh, it'll get better..."or it won't"😂😂

[@2koolchris291]

@@1onelyone and if it doesn’t then there’s always other jobs. Other companies. Nothing is ever set in stone and permanent in this crazy world we live in.

[@jamesmcdaniel337]

This 1 hour 45 minute and 25 second bathroom break is lit

[@SteveMCdaniel-h7n]

Hey Puddin , I'm watching you doing the brakes on old Roy , I'm not trying to tell you how to do your job but when you're doing rear brakes there are 6 contact points on your backing plates that should be cleaned and lined if you don't the rear brakes will squeak and it will also wear out your backing plates , just a tip from 45yrs of experience

[@Podunk82]

Just ordered me a PFS pinstripe T! Cant wait to add it to the collection, they are starting to show their age lol

[@kennethnesmith4936]

4x4 fronts are really fun, good job ,keep it coming roy is going to be cool for puddin pops. You will always remember the smile you will be putting on his face. I fix my pops truck for him,he has pasted by his truck still brings all the good memories back when I drive it.

[@telecasteroil]

Great Monday with old Roy! Someone buy this man a press for the main room!😂 Praying 🙏 for all your families health!

[@NoReverse77]

Daaanng I would have bought one of those shirts while I was in town this weekend.

[@elihuspitz5051]

Just ordered my grey button up shirt. They are awesome. Thanks for all the hard work. Keep up with the awesome videos.

[@Perpetualnerd63]

Woot! Shirts with pockets! Gotta get me one!

[@bairfamilyfarm1336]

Got Puddin and Mortskie here bench bleeding master cylinders, meanwhile Derek (VGG) and Kevin (JYD) just use the vehicle to "bench bleed".

[@douglasfowler2899]

Glad that you offered collard shirts so cool. I can wear the shirt to work.

[@doughoback5226]

It's Puddin time!!

[@robertwilliams8010]

Awesome shirt!!! That’s a goin to church for sure!!!!

[@cwczx3]

Man ol man when the new guy at work walks in with a Puddins Fab Shop shirt on! Shueewee!

[@jasonharper1757]

Had to pull over on my way to work. Didn't want to miss my opportunity to put up a grey PFS redkap🤣

[@Ryan_jones12]

Man, oh man here we go again it’s pudding time!

[@kevincordle9731]

Let's get o Roy a fuel and Jackson system. Make o'roy look awesome.

[@peadenl]

Funny how you had to figure out the brake tool. Back when I was a kid we only had drum brakes so you knew how to use it. You still teach me a lot of stuff anyway. You could use a historian every once in a while. Roy is looking good. Puddin Pop is going to love it.

[@DakotaSchultZ-l6z]

Yes love the square body

[@kevincorbin6273]

Hahaha, the apprentice is a natural, Well done Hotrod!

[@aprilhilliard3302]

At around 58:45: Don't mind you mocking Mortske...we do it all the time. But you gotta respect ol' Mojo! That guy is a true American classic! Blessings to you and the family

[@markk874]

Yes Puddin and OlRoy

[@WilliamWebb-eo9gw]

Flexplate will work, just need a bushing for the hub of the torque converter for older transmission

[@novaracer2000]

You only need the spacer for the converter snout if you use the dished flexplate. The 6.0 flat flexplate doesnt require it.

[@harley5252]

Ohhh good ol Roy!

[@groundhog8148]

Had to keep a eye open for a Puddin time video missed by 4 minutes 👍🏻🇨🇦

[@RPike-bq3xm]

I love this build. Fun stuff. Great family too. You got it going on! Thanks for the vid.

[@alanligus6083]

I hope you have better luck then I did with the wiring harness from Amazon. I had to check every wire pin out. I had 5 wires to the wrong pins. Finally got it running and no o2 sensor readings.had to redo the ground connections at pin to ecu. Good luck.

[@GregoryJohnston77]

Chris has it out for you. 😂😂😂😂

[@jacksonbennett6151]

Savage! We need a cutting room floor episode, I’m sure there’s some quality content there!

[@saltyreesescup3104]

You Just Made Me Happy When You Figured Out That Brake Tool...😁

[@The-Deadbolt-Deputy]

Dam Puddin those new shirts are slick !! I need me a “goin to town shirt” from the ole PFS !

[@IR-nq4qv]

Nice build, very relatable to trucks I worked on back in the day.

[@JohnBaker-ks8rd]

If u would squeeze the caliper back a bit before u try to take it off, they come off super duper Easy peasy

[@casanovasmizzle]

Gonna be a stellar rig for pudding pops!

[@DeadReckon]

Oh Chris sure put that in there 🤣

[@robertanderson8537]

right tools make it easier done it several times i own a 1979 squarebody

[@leefipps]

Don't put that in there Chris, lol, momma must have Jacob on that sweet tea again from a while back 😂

[@robertjones1709]

Hey Puddin'!! Glad to see ol Puddin' Pop gonna have a Custom built LS Powered Square body!! Can't wait to see Puddin' Pop's reaction once you present it to him... He's a lucky Dad! 👍 Man Oh! Man!

[@rickydonahue1586]

Puddin you can heat those copper banjo washers up with your turbo torch and they will get softer. Don't go too far or you'll melt them. I was a plumber for years and when I needed to make a bend in hard copper pipe I would heat it to soften it. I had that problem on my car so I heated them and BAM like a dream it actually worked.😁👍

[@WilliamWebb-eo9gw]

Those Red Kap shirts are nice Puddin

[@BarryCouch]

Puddin pops is gonna have a nice rig when you’re finished with it! Love the channel and this project. I hope your girls are feeling much better soon.

[@robertwilliams8010]

Let’s go it Monday Puddin time!!!!!

[@johnd21]

Great 1 as always. The pinstrips on that shirt is hottt!

[@justinthompson3236]

I was laughing so hard when installing the shoes and hardware because everyone’s been there and it’s the most frustrating job. You handled it better than me. “Find a new friend” best line ever.

[@fritzcaddy]

Red cap great work wear

[@thefreesoulchannel]

It's Puddin Time !!

[@RegularGuyLures]

I know you were super frustrated with the break job. But I appreciated that you showed the struggle because I thought I was the only one who had that kind of trouble with them. Thank you for the constant entertainment!

[@XrayDean]

You do so much in a couple of hours! It would take me at least a week or so! 😂😅 Keep on keeping on Puddin’!

[@robertparks8841]

👍 Puddin makes my Monday

[@ryanreaves1203]

A bad spindle seal is what caused the lockout and bearings to go bad. You have to remove it to replace it. The spindle bearing is also bad. Love the squarebody content buddy!!!

[@Fuqurfeelings01]

Pfs and VGG need a collaboration

[@HighToy85]

Taco Boy before the video? 😂😂

[@ep9360]

Thoroughly enjoyed the intense video. Exceeded my expectations. Forget about it. ❤

[@shaunrobertson9203]

I've been waiting for the button ups so that's amazing!!

[@milwaukeeroadjim9253]

I get really uptight when people bang on my door. I live in a city that bans solicitors but they still come by. Selling solar, energy or fiber optics or lawn care. One day I lost it when a second person stopped in the same day. The guy was trying to get people to sign up for newly installed fiber optics. I opened the door and started cursing. He said: "I bet the solar panel guy has already been here". That calmed me down and we spoke for a few minutes. Think I'll go order a button down shirt.

[@CreekbeatersTV]

I like those button ups.

[@buliTnotBot]

I like to use a film of silicone around the outside of the seal to help lube driving them in.

[@dogpatchfab]

New releases look killer!

[@JonathanWhoever]

Woohoo. I may be that ziptie guy!

[@saltyreesescup3104]

Oh I'm Gettin One Of Those...

[@demolitionsexpert]

Nice shout out to Corso Built!!

[@steelmill]

Hotrod cracks me up😅

[@shanewright6958]

Let’s gooooo. It’s time for another great video 👍👍

[@The-Deadbolt-Deputy]

Nice save on the broken body mount bolt Puddin !!!

[@zach9515]

I fucking love this build

[@chuckg3517]

I believe the eBay blemish headers have a 2-1/4” flange and the Holley brand are 2-1/2”.

[@barryadams68]

That's what the Mortske suite is for. Use that when everyone is sick.

[@karld34]

Hot Damn Puddin time.

[@The-Deadbolt-Deputy]

Good throw Hot rod !!!

[@dondavis6997]

It helps you put a little light motor oil in there. Just give it a Light. spritz when you put it together That way when you're engaged and disengaged it works good

[@almaylin464]

That was great stuff! If you have a friend with one of these and needs help with a brake job tell um to Piss off cause you don’t t need that friend anymore. 😂😂

[@DarKMatter.1]

You probably should’ve cleaned the back of those hubs (while you were in there) and put some anti seize or fluid film on there so it’d be easier if you/ somebody else had to separate them again. Which I’m from the rust belt so we put that shit on everything. 😂

[@t-roys]

You know what they say about In-N-Out burgers?? . . . . . After the food goes in. . . It goes right back out. 😂 I love seeing olroy getting some love. You can't go wrong with an old square body.

[@greatwhite7950]

Your so amazing end the best ever keep it up puddin always making me smile or tear up

[@DannyWatson-e2k]

Did a great job God bless you and your family amen 🙏

[@RobertMcCulloch-ww8vq]

Depending on the size of lift your gonna install, might have to get longer brake lines for the front and back. Made that mistake once.

[@SWResto]

Jacob you got a link to your LS Wire Harness you used? looking at them they all look the same. Not sure why you didn't pack rear bearings with grease?? Oh well I guess you'll do it next time!

[@gregorygibson5455]

Hello Puddin and Theo

[@GregoryJohnston77]

Man, you KILLED ME on this brake job. Jesus, I love you bro but you butchered TF outta that brake job. 😂😂😂 no grease on them bearings and smashing that seal in 😯😯

[@100PercentYourNeighbor]

Looking forward to seeing Ol Roy on a tee shirt!!

[@kennethnesmith4936]

You need antiseize on them adjusters, and on raised pads on backing plates. Help avoid noises.