1986 Dodge Ram 50 Truck Red Ocoee110312

Dodge imported this small truck, built by Mitsubishi as an answer to the need for a small truck to compete with Chevy's S10 and Ford's Ranger. Nice looking truck, and with A/C, it's practical year 'round.

[@texaskidzuk]

That is the best Dodge that Dodge never made.

[@coolrides]

Very true...they relied on the Japanese to do this one! Thanks! :) Jack

[@adape0884frank]

My parents had 1 and it was great truck. I remember that I learned how drive in it to.

[@coolrides]

Hey, Paco! I think we never forget the vehicle that we learned to drive in! I'm glad this was a great truck for your family! Thanks! :) Jack

[@xxdavexx669]

I have one of these in Australia. ..it called L200 express. Its an 85. My runs a fuel injected buick v6 with a vortech v2 supercharger with 15psi pully..t700 trans thats shift kitted and B&M mega shifter.. It fuckin goes like stink !!

[@coolrides]

Hey, David! Glad to hear these are in Australia! I can imagine, with a fuel injected V6 with a supercharger would make this go like a rocket! WOW! Thanks! :) Jack

[@caciowa]

in those days, the Chevrolet competition was the Chevy Luv (rebadged variants of the Isuzu Faster and D-Max)...

[@coolrides]

American car companies sure were interested in fielding small trucks as companions for their full sized offerings. Thanks for mentioning Chevy's partner. Ford had ties to Mazda. :) Jack

[@dsteele27]

I'd almost forgotten about these. Sort of like a Chevy LUV, but much later. I can't remember just now what the Japanese Ford little truck of the early '70s was called.

[@coolrides]

The Ford Courier, made by Mazda. Thanks! :) Jack

[@dsteele27]

Thanks :)

[@cheddyrod]

The owner has done a great job of looking after this little hauler.

[@moto9968]

Nice truck man. Would it be worth getting one of these? How much would it run used

[@coolrides]

A lot depends on mileage and condition....I'm not an expert in values, but if it ran well and didn't have major rust, I'd be interested if it were cheap. Thanks! :) Jack

[@moto9968]

@@coolrides hmm alright then. You're welcome.

[@coolrides]

Hey, Omar! I agree...you seldom see this model truck now. Thanks! :) Jack

[@jhonnatanrl40]

Thanks Jack and hopefully the owner can view the comment and to get in touch with. More over I have a truck of the same model but not as comprehensive as this and if I'm interested in a truck like this well maintained and complete. Greetings from Veracruz Mexico Jhonnatan

[@coolrides]

Hey, Jhonnatan! I sure hope someone with knowledge of this truck gets in touch with you! Thanks! :) Jack

[@selsoogando6230]

Encanta tengo una desa 86 donde encuetro la loaluse trasera hestan fea lamia

[@coolrides]

No es mi camioneta ... Espero que alguien pueda ayudarlo a encontrar piezas. ¡Gracias! :) Jack

[@coolrides]

Hey, Jason! Yeah, I think the gas engine is more practical for this light duty truck..now those huge trucks may very well be better candidates for the tremendous torque of a diesel. Thanks! :) Jack

[@mzuvin5705]

I am getting an 87 dodge ram 50 and I need to know if it really is a good truck before I work my ass of this summer to get the dents removed and repainted to the original color.

[@coolrides]

This isn't my truck, but I'll let my viewers comment on that....but from my viewpoint, consistent oil changes are extremely important. I've known owners who never have changed their oil...needless to say, I wouldn't buy one of their cars. Thanks! :) Jack

[@mzuvin5705]

Ok thank you Jack

[@gradyhernandez5231]

how do you rebuild an electronic feedback carb on an 89 dodge ram 50, 2.6 lit??

[@coolrides]

Hey, Grady! Sorry, this isn't my truck..just videoed it at a show. I'll leave your question here in case someone can answer it. Thanks! :) Jack

[@coolrides]

It's a nice little truck! Well taken care of! Thanks! :) Jack

[@JoseChavez-nw9xd]

No sé si hablas español yo tengo una igual pero se averió el volante de inercia y no lo puedo conseguir alguna sugerencia

[@coolrides]

No hablo español, pero confío en el traductor de Google, y no es mi camioneta ... ese motor es un Mitsubishi de cuatro cilindros. Es posible que tenga la mejor suerte al ponerse en contacto con Mitsubishi y ver si tienen una pieza de repuesto. ¡Buena suerte! :) Jacobo

[@coolrides]

Hey, Chester! I agree...it's seldom you see this model anymore, and definitely not in this excellent condition! Thanks! :) Jack

[@idahodad1]

I'm looking for the headlight relay on mine, would you have an idea where it is on this vehicle? Thank you.

[@coolrides]

Hey, Tim! This isn't my truck...perhaps the owner will see your comment. Sorry I can't help. Thanks! :) Jack

[@mi777ke777]

nice and rare too ...i bet it would make an awesome looking rock crawler :)

[@vrucker101]

I've a 1989 Dodge Ram 50 2.0. Where is the fuel fitter?

[@coolrides]

Not my vehicle...I hope the owner or someone familiar with the vehicle can answer your question. Thanks! :) Jack

[@coolrides]

That could be...not my truck, so I don't know the history! Cool that you have a similar truck! Thanks! :) Jack

[@A.Belka83]

привет , ищу переднюю решотку радиатора. где купить?

[@coolrides]

Hey, Andrey! Not the owner of this truck....I hope that one of my viewers can help in finding a front radiator grille for you. Thanks! :) Jack Не владелец этого грузовика .... Я надеюсь, что один из моих зрителей поможет вам найти переднюю решетку радиатора. Благодарность! :) Разъем

[@oscalilopez8801]

Hi all of you guys. I'm trying to find for one of these trucks some carb parts (it's an feedback one) any ideas will help thanks

[@coolrides]

Hey, Osacali! Not my truck...but I'll leave your comment here so that maybe someone can help you out with the carb! Thanks! :) Jack

[@oscalilopez8801]

thanks jack R

[@coolrides]

oscali lopez Hey, Oscali! My pleasure! Good luck! Thanks! :) Jack

[@travisvalentine8493]

i have a 1985 dodge ram 50 royal 4cyl 2.0 can anyone tell me where the fuel filter is ?

[@coolrides]

Hey, Travis! I don't have the answer to that, but perhaps some of my viewers can get back to you with the answer. If it's any help, I remember that my '62 Chevy had the fuel filter at the carb inlet, visible when you detached the line. Thanks! :) Jack

[@SoulsForge]

travis valentine under the cab

[@jaysavy]

I have an 86 R-50 and there is one by the carb

[@coolrides]

Hey, Mike! I'd agree...doubt the owner would do that, though. Thanks! :) Jack

[@mitsubishikid1187]

I got an "88 Mighty Max the Mitsubishi version of this truck, but mine is a 4x4 model with the auto locking hubs, it needs work but honesty it's the easiest truck I have ever worked on and I'm not biased my mom owned a 22r toyota pickup also a nice truck but not as easy to work on and parts have the Toyota tax added.

[@coolrides]

That's great insight into this truck...I think being easy to work on is almost a forgotten attribute of cars and trucks today. Congrats on having one of these! Thanks! :) Jack

[@ramvanbobby3889]

I have someone that wants to sell me one for 4 bills runs but needs work r there still parts available for these pickups

[@coolrides]

Hey, Bobby! Not sure, but I'd ask the local parts store like NAPA here in the U.S. to see if the mechanical parts are available. The body parts would probably be much more of a problem. Thanks! :) Jack

[@jesus-wu9rv]

hard

[@ramvanbobby3889]

OK I'll do that thanx buddy

[@coolrides]

My pleasure! :) Jack

[@ramvanbobby3889]

what a nice truck

[@coolrides]

Hey Bobby! Yes, they had a nice cooperative agreement back in the day between Dodge and Mitsubishi. Thanks! :) Jack

[@coolrides]

Hey, Jason! I'd say this is a conventional gas engine. Nice little truck! Thanks! :) Jack

[@jhonnatanrl40]

if that hope. Might you tell me where did you record the greetings video jack :)

[@coolrides]

Hey, Jhonnatan! I recorded that greetings video (1955 Ford) in Eustis, Florida, about 30 miles from Orlando. Thanks! :) Jack

[@emmanuelaliciatrujillo4069]

I need ac in my truck 😢😢 I have the same truck same color

[@coolrides]

Hey, Emmanuel Alicia! I don't know if Dodge offered A/C as an option. I believe the truck is Mitsubishi, and you might have some luck checking with their parts department. Thanks1 :) Jack

[@jhonnatanrl40]

Would I like to know if you sell it?

[@coolrides]

Hey, Jhonnatan! Sorry, it's not my truck. I just videoed it at a show. But I'll leave your comment here in case the owner sees it, and is interested in selling. Thanks! :) Jack

[@snowracing44]

What engine is it?

[@coolrides]

+Cody Stillwell Hey, Cody! It would have a Mitsubishi engine. 2.4 liter 4 cylinder as original equipment. Thanks! :) Jack

[@crosisofborg5524]

Jack R nope. They only came jn 2.0 and 2.6

[@johnarnold1229]

I have a 1985 Dodge Ram D50 what size is bottom alternator bolt and how do you take it out or something in it

[@coolrides]

Hey, John! Sorry, I don't own this one, just videoed at a show. I hope that a viewer who is familiar with the alternator bolt can answer your questions. Thanks! :) Jack

[@gradyhernandez5231]

Thanks.. This 4 cylinder should be way more economical than it is already..It wastes alot of gas (and its a 5 speed).. so must be the carb and/or wrong air fuel ratio

[@gradyhernandez5231]

Like I said I have a 1989 Dodge Ram D50, i also need the power steering gear box besides instructions on how to rebuild the electronic feedback carb 832 795 2075,

[@coolrides]

Hey, Grady...hopefully someone will see this and respond. Thanks! :) Jack

[@coolrides]

Hey, Brandon...don't have your email address, messaged you with mine. Thanks! :) Jack

[@ramtuff2007]

kool dodge

[@TrollinTalent]

FIRST!....oh by the way I have something interesting for you to hear. You should email me... your gonna love this one.

[@kenh8925]

I bought one brand new in 1985 for $7001.00. Last I new it had over 250,000 miles on it. It was a great little truck

[@dbawler50]

have three sell u one

[@coolrides]

I'm not in the market, but thanks...I'll leave the comment here so maybe someone who is interested can contact you! Thanks! :) Jack

[@jhonnatanrl40]

Thanks Jack and hopefully the owner can view the comment and to get in touch with. More over I have a truck of the same model but not as comprehensive as this and if I'm interested in a truck like this well maintained and complete. Greetings from Veracruz Mexico Jhonnatan