How to Replace Window Motor 94-02 Dodge Ram 1500

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@patprendergast8305]

OK thanks for posting this. I did learn some things, BUT the viewers should know that you DON'T have to remove the regulator to change out the motor. Just tape the window UP and reach in and take the 3 bolts out. you don't have to worry about the rotational spring going flying either. it's holding the window in the up position . just leave the regulator bolts in place. I loosened a couple of them just in case they needed to be, but it was very easy and it worked great the first time. I had it done in less time than it took to watch the video.

[@shundadon1041]

That's what I was looking for dude thanks

[@rparcz]

So you're saying, through the speaker hole remove the motor with the three bolts and it comes off without any recoil?

[@terryjohnson6823]

Thanks for posting that. It worked without take everything out .

[@terryjohnson6823]

My window was up. So i just taped it to stay up .

[@nelmor29]

Thanks a million. I just did it to my truck just loosened 2 bolts from the regulator closest to the motor, then just removed 3 bolts from motor. Pulled it out, installed new motor, tightened bolts and VOILA, 15 minutes later had a working up and down window....

[@Nivek9866]

I used this video to install my window regulator and assembly, and the video was amazing, thank you so much sincerely

[@Angel283]

Very informative video. My window on a 98 just fell off the track....didn't break window I hope. This gives me a place to start. Might just upgrade speakers while I'm at it :) Thanks for the post man, I really appreciate it.

[@BRYAN19621]

Great video!! Easy to understand and very clear. Big help Thanks!!

[@scottswinda4727]

What if the window is up with bad motor

[@TubeInspire]

Thank you!! I just did my own motor job!! 🤟

[@michaelwolff9207]

Good Demo! I Have a 1992 Dodge Ramcharger that needs updated Electric Windows and Door Lock Parts.

[@michaelwolff9207]

Good Coverage with Camera Guy too!

[@nutmegger69]

Challenge anyone to to replace this window while watching this mans tutorial and keep up, no pauses.

[@tcproaudiollc]

Hello we're working on our passenger door on a 1999 Dodge ram 1500 The window will not roll up or roll down we hear the motor try and figure it must need to be replaced cuz it won't move how do we replace it with the window rolled up or what was you suggest we troubleshoot

[@user-vt1vn7is6w]

What if the window is stuck up

[@djgioyee2976]

Taylor my window wont go down

[@kreigs4117]

I guess we are fucked dude. Cause I'm in the same position

[@mikeruizxd5534]

Did u find out?

[@patprendergast8305]

@@mikeruizxd5534 if your window is stuck up, then just replace the motor without pulling out the regulator.

[@mangstrum]

Thanks for the video worked well

[@raybrensike42]

Some of these parts are made with cheap, weak materials, so be very careful when tightening the bolts. The part I got didn't fit exactly right. It required that I add washers so the drive gear wouldn't bind up on the regulator. Cheap parts. Poor fitment, but I got it working.

[@brianb5779]

Dumb question but still gona ask, is the 2500 the same as the 1500?

[@pollytyra2428]

415 good job .my cog will not hook on the motor frame thing.. plz help!! Thank u

[@thomasmichaels6850]

So, the spring goes flying off when the old motor is removed, then he miraculously installs the new motor on a brand new regulator with spring intact? The video was good up until that point. I need to know how to get my bad motor off without the spring shooting across my garage, and if it does, how do I get the spring reinstalled on my existing regulator? I have the new motor. maybe I should have purchased the new motor already attached to a new regulator and simplify the process. In other words, HELP!

[@chrisk4177]

Mine is stuck up and I can’t get the window down I unplugged the window and used a test light and my switch is good it gets power both ways were the window plugs in at. If I need to change my motor again how can I do that with the window stuck up I dk how to get the window down

[@karenparker7782]

Window stuck in position. Could it be the switch or motor. Don't want to replace motor unless necessary. Passenger window works fine.

[@Poordirtfarmer]

Your good thanks

[@1AAuto]

+Poor dirt farmer Thanks for checking us out. 1AAuto.com

[@Poordirtfarmer]

@@1AAuto thanks watching your video 1 time was all i needed . you made it perfect . thanks again 💪✌👍

[@kevinparsley3363]

My fingers thank you!

[@paulitolopez2841]

How do I get to my back window on my 2010 dodge pick up truck on the door

[@1AAuto]

+Paulito Lopez We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-1AAuto-c

[@fortunatocheko8644]

Thank You! yes my 2001 Dodge Ram power window is stuck in the up position.

[@carbonthoughtproject6037]

Was it just one window or both i have just one window not working

[@cameronp5728]

How do you remove the regulator if you can't roll the window down because the regulator has the guides in the up position

[@1AAuto]

+Cameron P You can still take off the door panel and push it up so you can tape it.

[@cameronp5728]

@@1AAuto that is what was unclear.... To anyone who runs into the scenario where you can't roll your window down and its stuck in the up position. You can still reach those bolts that hold the window to the guide arms attached to the regulator motor. My process was to loosen the bolts that hold the window to the guides and just keep them snug. I then loosened all the bolts that hold the entire regulator assembly and guides to the door like in this video. I took the bolts in the center out first the one right behind the door handle and then the one below that. Don't remove the bolts on that sit in a slot with a cut out around it. Whenever I took the two bolts on the left side out the window was wanting to move down but I anticipated that and it wasn't bad at all. Just be careful and go slow and mind what you are doing. It's no where near as scary as removing the regulator motor from that torsion spring thing. Good luck!

[@kds7392]

Thanks Cameron. My passenger window is stuck open and was wondering what the process is. Thanks a lot. Going to be a breeze with your info!

[@ALBERTO6296]

👍

[@jcIsInURHouse]

Oooo 😯

[@Davilow]

I've endured the pathetically weak and annoying intro (sung by an untalented Johnny Nash wannabe) to "I can see clearly now..." no less than 18 times, yet I still have no idea what the advertisement is pushing because I'm too focused on the countdown for the "Skip Ad" button. Tip to KZbin/advertisers: Showing me the same ad repeatedly is not going to make me finally decide to click on the ad, it has quite the opposite effect.