How to Replace Radiator 00-14 Chevrolet Suburban

Buy Now!
New Radiator from 1AAuto.com 1aau.to/ia/1ARAD01032
In this video 1A Auto shows you how to repair, install, fix, change or replace a broken, damaged, or leaking radiator. This video is applicable to the 00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14 Chevy Suburban.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oan6/1AXAA00013
• 10mm Socket 1aau.to/oZr/1AXAA00017
• 13mm Socket 1aau.to/o8R/1AXAA00015
• 8mm Socket 1aau.to/oZr/1AXAA00017
• Trim Tool Set 1aau.to/oqf/1AXXX00004
• Channel-Lock Pliers 1aau.to/obn/1AXAA00139
• Ratchet 1aau.to/oapA/1AXAA00016
• Socket Extensions 1aau.to/o8R/1AXAA00015
• Pick 1aau.to/oiz/1AXAA00037
For More Info visit us at 1aau.to/h/bpQ/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@Vvykk]

Great 'how to' video. Though, I like how you cleaned the radiator fan but not the air filter and housing, which looked pretty awful. Sure, irrelevant to the radiator replacement, but still noteworthy on a repair.

[@BD-tv6nm]

Great video. The bottom transmission line was seized on mine. I found taking the fan shroud off allows more access. Feels good saving money, thanks for the great tutorial!

[@bobfather1978]

Nice video helped a lot man thanks for the knowledge beats taking it to shop and paying 400

[@1AAuto]

+ChevyGod Gonzalez Thanks for checking us out. 1aauto.com

[@michaelgreen8930]

Thank you so much you saved me some money and the job was so easy!!!!

[@1AAuto]

+Tmike Bomaye green Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

[@Dan1128]

1A auto has the best parts and videos

[@1AAuto]

+@Dan1128 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

[@shagg2swagg]

The best of the best

[@girlsruleVII]

This information at the end was quite helpful. I did the repair myself and changed the lower and upper hoses too plus the thermostat. Thanks 1A Auto Parts!!!

[@1AAuto]

+girlsruleVII Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

[@wahidstx]

@@1AAuto I think I will do the same. Also thinking after this procedure we'd need to add more transmission fluid as well right? Since the part that was in the old radiator would be missing in the new one by that much.

[@familycano1454]

This helped out a lot

[@1AAuto]

+Javier Cano Thanks for the feedback!

[@aaronfrausto3457]

Good job!

[@1AAuto]

+Aaron Frausto Thank you!

[@MichaelBenninger]

Great job

[@shagg2swagg]

I love these guys

[@1AAuto]

+Bizness Swann Thanks for checking us out!

[@shagg2swagg]

@@1AAuto y'all my guys all day every day

[@shagg2swagg]

@@1AAuto thank-you

[@1AAuto]

+Bizness Swann Thanks for the great feedback!

[@onecleanplatinum8434]

I purchased a radiator from 1A auto. No problems at all except the fitting for the top tranny cooler line is leaking I’m hoping it’s just the o -ring that is bad. I’m gonna swap it out from my old radiator. Check o-rings on the tranny cooler line fitting before installing the new radiator

[@montana3227]

Thank you

[@1AAuto]

+James R Thank you!

[@matthead382]

What is the funnel with the cap you used to refill the coolant?

[@majinkaos]

Drained the coolant twice…once from the wheel well, second time from above after removing fan…😂

[@1992JayRoc]

How would I know which configuration radiator I need (I.e. with only trans cooler or with trans and engine oil cooler). 2007 Chevrolet Suburban.

[@rob.-_-.]

If you have two small lines going in on the drivers side of your current radiator then you need the version with the oil cooler fittings. If not, then you need the one without.

[@theh3is3n3brg5]

if your temperature gauge stays at 0 after the replacement? Remove the "ECM-BATT" fuse for 10 seconds, that should fix it.

[@markkroehler8016]

While I appreciate all of the videos you guys put out, why did you re-attach the hoses before putting the fan assembly back in? Just complicates things and wasn't necessary.

[@thetalkingboard]

Sometimes they reuse footage for replacement of other parts. If you only want to replace the fan housing, you would do it this way. Now they don’t have to record multiple videos for different parts. Like magic.

[@juanmoya2162]

what size are those trans fitting threads??

[@ipalmbeachlifestyle8272]

12:04 you can see an Alien. 👽 your welcome.

[@bioteecher]

Ha, I looked

[@thetalkingboard]

I need the smaller hose that you remove that goes from the radiator “to the top of the engine” but you don’t say what it is. Do you sell this hose? What is it called? Thanks.

[@mack606]

Where can I get the plastic clamp for the top hose that mounts into the top of cooling fans to keep the upper hose in place

[@Jwlson11]

Did you have to top off the transmission fluid too because of the transmission lines attached to the radiator???

[@Thelostsouls13]

They’re coolant lines, so he did by virtue of topping off coolant.

[@bowenthompson2079]

Will this be the same for a 08' Chevy Tahoe?

[@mark.is.7541]

👍👍👍

[@LLantas714]

How about the other 2 empty slides on the other side are they need it ??

[@mack606]

Great video but you don’t have to remove the whole fan they did that because that’s new replacement just unhook both fan connections and remove the 13mm bolts and it slides back enough to remove the radiator

[@rcaandrade55]

Will these instructions work for a 2007 Chevy Tahoe?

[@1AAuto]

+@rcaandrade55 The part in this video fits your application, and the install should be the same or similar. Buy this part on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

[@rockybalboa4394]

Will this work on a 2004 Tahoe?

[@1AAuto]

+rocky balboa This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1AAuto.com

[@chelsemo15]

Does th tahoe have a radiator in the back wheel area on the passenger side?

[@madisongrassman3578]

Nope. 1 radiator in the front

[@KingKongDoni]

Is this the same for a 2013 Tahoe?

[@1AAuto]

+Louie Lemmons This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-1AAuto-c

[@mjjackaroos112]

Whats the back Jam?

[@capostrength3908]

What’s the hose at 10:36 called?

[@oscarurrutia3122]

Is this the same process for a 2011 Cadillac Escalade?

[@ryanmcdonald5351]

Trans cooler lines @ 4:40

[@TheOscy1992]

I took mine apart and had trouble taking it out cause of the condenser it was hook on to it

[@1AAuto]

+Oscar Carrera Thanks for checking us out! 1AAuto.com

[@raynix3052]

So in the very beginning u show removing fender well and removing lower hose, then later in the video after u remove the shrowd u then remove the lower radiator hose again at around the 9:57 mark, your video is messed up and confusing as far as that part goes. Looks as if the part of taking tire off and fender well was all unnecessary.

[@marepenis]

Exactly what I was thinking... I have a 2003 and it don't look like that... so this whole video is kinda wrong and confusing

[@chuemoua6834]

This is definitely the newer model with the electric fan ..

[@richardcrump6043]

Is my Denali and a Yukon The same vehicle

[@zmanphx]

My 2012 Tahoe with 70k miles radiotor leaking hence here. My 2008 Yukon with 165k miles still has original radiator.

[@mkilic10]

the older GM the better quality. I replaced the factory radiator on my 98 Lesabre just last year.

[@BWADaniel]

My 2010 Avalanche with 215k miles, first radiator change happening now. Lol.

[@johnshanahan6439]

That coolant housing looks a whole lot cleaner going back on. Hmmm....

[@MAC-ws8fz]

Just go trade it in for a new one!

[@efrainbarrera4011]

does this work on my 2003 chevy tahoe??????????

[@1AAuto]

+Efrain Barrera The procedure may be similar. We currently do not have a radiator install video for your vehicle. Thanks for checking us out!

[@nyc1655]

So much crap just for a radiator.

[@user-wh7fj9ep8h]

يوجد شحن السعوديه

[@user-wh7fj9ep8h]

قطع غيار

[@jtmadden1359]

I do not want to see these programs again I did not subscribe to this don't send them to me