√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
@brianroberts98292 жыл бұрын
Where is the power steering fuse
@jeffbooth73883 жыл бұрын
Thank you! I've put this off for a few years because it looks so nasty (after 180K miles). I followed your steps and it was quite simple -even did it in the dark. What a difference in steering! Other F150 folks, when your steering gets tough they're going to tell you it's the rack $1200+). I was about to bit the bullet but sprayed my intermediate shaft u-joints down with PB Blaster (I mean soaked them). Took care of it. The, 5-6 years later (I know...) I swapped the shaft. It's like new.
@mkit832 жыл бұрын
"I'm just gonna get a bigger hammer" 🤣🤣 great video thank you. Looked it up in my haynes and it just says "it can't be done" something needed reprogrammed.. 🤦😖 i knew better. Thank you
@atoiler13894 күн бұрын
Identical procedure for the 4th generation (2006-2010) Ford Explorer and Mercury Mountaineer, all models.
@FoolSmile-cp5ix5 ай бұрын
Thank you! Fantastic step by step. Greatly appreciate people like yourself that take the time to share knowledge with the rest of us for vehicle fixes.
@1AAuto5 ай бұрын
+@FoolSmile-cp5ix Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@kenmiller84994 жыл бұрын
Great tutorial! Just finished my 2013 with 150000 miles.
@SexyTexas3 жыл бұрын
About to do mine
@samlarin7941 Жыл бұрын
So, awesome video. I completed my swap on my 2014 F-150. Only thing is I got everything back together after an hour of fighting, now if I want to drive straight my steering wheel is turned 15 degrees to the right. What's the best way to go about fixing that now?
@brianpearl75044 жыл бұрын
If you have a shorter torque wrench, "well then, good for you!" Ha ha
@brettbarager91013 жыл бұрын
Good vid. I appreciate the little tip with the steering wheel.
@jeffheywood6101 Жыл бұрын
Any tips or videos about changing the upper shaft, the one that passes through the firewall?
@1AAuto Жыл бұрын
+Jeff Heywood We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-1AAuto-c
@datboigavin4966 Жыл бұрын
If it’s bad will it throw off the Advance service track light my fuses are still good but when I tap it with a hammer it loosens it up and it steers again
@mikekopycinski24802 жыл бұрын
Great video, pretty easy to replace, only thing is now I have a little play in the steering wheel. How can that be fixed? Thank you
@mikewitdm2 жыл бұрын
@mike kopycinski Yea, got same problem. I’m thinking the bolts may not be tight enough.
@santana4444 ай бұрын
Is this the shaft that controls the telescoping of the steering wheel
@MattDragonTamer Жыл бұрын
Does this not cover 09-10 models as well? I thought the 07-14 had all the same setup?
@jonathanocampo21449 ай бұрын
Is there a video for a 2014 Silverado??
@tonycervantes48163 жыл бұрын
Ok which is of best video this or of other because you have 2 videos like that?? Can tell me please
@mussskyrat30962 жыл бұрын
I’m having super sensitive steering can almost feel every little bump and there is a little play in the wheel when turning from center I recently had a bad tire which was causing a death wobble in the front end of my truck
@Koltrain Жыл бұрын
I replaced mine and when I turn it makes a clunk feel in the wheel, any advice?
@petertimpson93782 жыл бұрын
Excellent video. When I tapped the top of the shaft down on my 2011 the upper shaft came down through the boot by about 2". Does this have anything to do with the telescoping steering wheel? What is the best way to get that upper shaft back to it's regular position? I got the old one off and the new one on the bottom but the new one won't fit(even fully retracted). I just want to make sure I have the upper shaft in correctly.
@homepro21553 жыл бұрын
if I don't have a torque wrench can I just tighten with a normal socket?
@1AAuto3 жыл бұрын
+Home Pro a torque wrench would be required to set the proper tension on the hardware. Thanks for watching. Buy the part in this video on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
@hartfordboothe74664 жыл бұрын
Thanks for the video. It would be helpful to illustrate what problem was experienced to require this part to be replaced. "I'm just gonna grab a bigger hammer..." :) Love it, works for me. On the "red" Loctite: Rots o' ruck, G.I. When you need to remove that 1) you have to heat it and 2) you have to remember that that's on there. If the next guy isn't you, he's in for a rodeo.
@1AAuto4 жыл бұрын
+Hartford Boothe Thanks for checking us out!
@martinsteiger75274 жыл бұрын
Would be sticky steering hard spots ..also play in the wheel before wheels turn from strait
@jonrump44603 жыл бұрын
Would this be the same process for a 2010 Expedition? My symptoms are “sticky” wheel at the 8 and 4 positions on the wheel. Otherwise the wheel turns freely. How to know if this is the problem versus a steering pump? Recently flushed the steering fluid and that didn’t help. Thx!
@JohnBray11 Жыл бұрын
Awesome instructions and great commentary
@milliandallazz7362 Жыл бұрын
Great video I learned a lot today from this video so simple with the right tools
@MrHeavyev2 жыл бұрын
I did mine on my 2010 F150 I had a hard time to get bottom bolt out after I finished installing shaft I find that my steering wheel is not center and it seem that my steering turns more on one side compaired to other side I think my steering might have turned when I tried to put shaft back on What do I have to do to get my steering wheel back to normal Any help will b appreciate Thanks
@AtvSquad2 жыл бұрын
I’m having the same problem now
@wolfcalls5 жыл бұрын
what is the next steering shaft part called above that one? i replaced that one,,and i have slop where the 2 connect on top. was told the next shaft part is worn out on the end and needs replaced. do not know the name of part? ? if you can help,,thanks
@MentalExistence2 жыл бұрын
Steering shaft
@BustedGeezerGarage3 жыл бұрын
If you would have removed the air cleaner box and tube one could see the column and associated parts much easier. Not to mention easier to get to the job.
@1AAuto3 жыл бұрын
+Diesel Prof Thanks for the feedback!
@ag16394 жыл бұрын
It looks like the same procedure for a 2010 f150 too.
@jimlallathin4268 Жыл бұрын
My son replaced his intermediate shaft, after a test drive, the steering wheel is in upside down position, how can he fix this problem
@quantumz59343 жыл бұрын
How did you know it was bad... steering play?
@willdavis9471 Жыл бұрын
Thanks for the info!!
@Artificial_Fishing3 жыл бұрын
Is this the same on the 2017 f150?
@gregking50383 жыл бұрын
Yes except 10mm bolts on both ends.
@rickmossop37332 жыл бұрын
Thanks. Huge help!
@commercialelectrician1332 жыл бұрын
Great video
@wtolar254 ай бұрын
Is this. 2wd? My 4wd looks way more complicated, not a lot of room
@joepaolina72084 жыл бұрын
Will this work on my 2009 f150 platinum?
@1AAuto4 жыл бұрын
+Joe Paolina The part in this video fits your application, and the install should be the same if not very similar. You can pick this part up here: 1aau.to/ia/FDSTC00011
@joepaolina72084 жыл бұрын
1A Auto: Repair Tips & Secrets Only Mechanics Know awesome thank you so much. I just wanted to ask since the video title said 11-14
@marvinmarks69944 жыл бұрын
Do you have one for2006freestar
@1AAuto4 жыл бұрын
+Marvin Marks We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1AAuto.com
@sonnylane34425 жыл бұрын
Will this help or fix the slop/dead zone in my 2011 f150 steering wheel
@daveykillz27805 жыл бұрын
Yes it would. I have the same issue and will be replacing mine soon as well. Be aware though, part number 8L1Z-3B676-A can be found on ebay for like 40 bucks. If you click on the a1a auto link it takes you to the page where its for sale for well over 300 dollars. Just a fyi.
@eegg69543 жыл бұрын
@@daveykillz2780 The OEM Ford part is $133.00 in 2021. If you want a Chinese knock-off on your steering column, they're about $30. Good luck with that.
@brianroberts98292 жыл бұрын
Power steering fuse
@joeh6902 жыл бұрын
i need to know what part i need and how to do this on a 08 ford ranger ?
@mikewitdm2 жыл бұрын
@joeh690 part number you may need is (425-368) at least that’s for my 04 Ranger. it’s the same process, 2 bolts. Just keep in mind how you pull out, the bottom part has a spline , and also for the bottom one, a wrench would be preferable.
@joeh6902 жыл бұрын
@@mikewitdm do you know what would cause my wheel to have a clunk noise coming from it when i turn it. it looks like its coming from the shaft like the u joints or something. i can visually see it when i have a friend turn the wheel. but it happened when i had my rack and pinion steering replaced my a mechanic shop. it never had this noise till then. im getting multiple people saying the shaft itself is bad. But i don't get how it would go bad that quick. or the bearing is gone or worn out, either they forgot to put it back in or used an old one ??
@Hunterslife3152 жыл бұрын
looks like you used a penitrating oil on the nuts
@brianroberts98292 жыл бұрын
Fuse
@dadutchboyproductions6234 жыл бұрын
Just gonna have to make my own video for the real trucks f250, f350 etc., since they fail at the lower steering shafts rubberized point just above the steering box. Buuuuut you have to buy the whole damn shaft even though its just the link that fails...
@1AAuto4 жыл бұрын
+DaDutchBoy Productions Thanks for checking us out! 1AAuto.com
@Wraith5ohАй бұрын
What is a Vericle? 😂
@johnmesser327811 ай бұрын
Bungie idea came from Fordtechmakeuloco channel that came out 9 years ago. Your channel or his does not address a rusted system. I live in the Northeast. Bottom bolt rusts to reduced size head which creates a nightmare. No channel addresses this. I am dealing with this now.
@paigekyllonen66132 жыл бұрын
Would this world in a 2010?
@phcllc243 жыл бұрын
You do you boo boo 🤣
@Workin_roadtrip Жыл бұрын
I’m not your friend , I don’t know you!!
@MikeO-ss1cn4 жыл бұрын
Is this the same setup on a 2012 E-150?
@1AAuto4 жыл бұрын
+Mike O This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1AAuto.com