Fixing the steering issue on a 2009 ford f-150 Our Brand: Free2Ride.com Our Print Shop: IHPrints.com Instagram: @Free2Ride @In_House_Prints @TylerCary @lifeofa.female.screen.printer
Пікірлер: 17
@mdl51557 ай бұрын
My 2007 Lincoln Mark LT was getting harder to steer. I (wrongly) assumed it was the power steering pump. In the process of replacing it I noticed the lower end of the steering shaft was really rusted. I ran across your video, ordered the right part, and WOW!!! It turns like when it was new! The old pump was probably not the cause because the old steering shaft was really binding. THANK YOU!!!!
@TylerCary7 ай бұрын
Awesome! Glad it worked out for you
@JoseGonzalez-bb5nd Жыл бұрын
Thanks for this video I had the binding issue and broke through that now I have the play in my steering wheel it’s been like that for quite some time now but this looks like a easy DIY repair, now all I need is good weather
@michaelelliott265310 ай бұрын
My 2011 Lincoln Navigator's was tight, like driving manual steering. Before buying the shaft I tried spaying WD-40 on both universals. 2000 miles later and still smooth as new. Apparently it was simply a rust issue and not needle bearings in the joint. So I'll change it if it does fail.
@leodeboca2 ай бұрын
great!
@spindr9098 ай бұрын
Hey thanks for the video. I wonder what's next if this does not work? I replaced my intermediate steering shaft (2011 F150) but after driving it 15-20 min. and thinking all is good, turns out it is still binding. Any ideas? Does it need an alignment? Possibly reprogramming as they do with the rack and pinion? Thanks
@micahwhite94508 ай бұрын
Many people (myself included) have reported issues with steering wheel alignment after changing this shaft. After many an hour researching this, it appears to be an issue with the cheap replacement shafts not being "clocked" appropriately to OE spec. In my experience the cheap ones will almost certainly move your steering wheel off center to the left or right about 5-15° (this can potentially be corrected with an alignment). They will also likely introduce significant play into your steering wheel. Maybe you'll be the lucky guy who gets a "good" cheap one, but if your luck is like mine save yourself the time and headache and just buy the OEM shaft from Ford (it was dead on). Hope this helps some folks. I just had the same issue.
@MsC-ol7zu3 ай бұрын
Thank you for sharing your experience. We are looking at doing this replacement and my husband ALWAYS goes the cheapest route. I read him your comment. Thanks again.
@squangan21 күн бұрын
@@MsC-ol7zu Always go with the Motorcraft brand part when repairing these trucks. You save yourself doing the job again shortly later after the cheap part fails.
@wilfredolopez47685 ай бұрын
When I was pulling mines out , half stayed in my hand and the other half stayed on the bottom. Question if it comes apart is it still good ?
@miguelsolorio55445 ай бұрын
Hi thanks for your video Israel good explains everything but I have a question your truck make noise when you turn your steering wheel to the left mind mine make a horrible noise
@JM-sj4wjАй бұрын
That is probably you power steering pump
@bobbaker8715 Жыл бұрын
I just replaced it and it still binding when I cut steering wheel
@inflamespwn10 ай бұрын
hey is this the part that is like 70 bucks on amazon? did you have steering wheel alignment issues after?
@TylerCary10 ай бұрын
About $50 on Amazon or local parts store. No alignment issues if you make sure to keep the wheel in place
@micahwhite94508 ай бұрын
The cheap ones are not clocked to OE spec and will almost certainly throw off your steering wheel alignment. I just went through this with 2 separate cheapers. Got the OEM from Ford and it was dead on.
@jeffharrison7003Ай бұрын
U were told to tie your steering wheeling in place.