2 0l TSI Injector Service

[@thecurebr]

What a well explained and well filmed video. Quality content.

[@lindydeer9240]

Excellent demonstration, camera work and lighting. Thanks

[@GIL839]

wow great demonstration Rain. Great job

[@raincitywrench117]

Thank you 🤗

[@markusaurelius3161]

Great video! Nice and relaxed explanation of what you’re doing and why. Easily brush the o rings with vaseline, nice work! Exactly the way i would like to work. 👍 Was wondering if you tested the spraypattern, and if they leak, i think common problem on these injectors.

[@raincitywrench117]

I don't have a flow bench, that would be nice. This vehicle was in for a walnut blast and ran like a top after. I have seen two of these engines come in with injector pintles sticking open and heavy misfires before so you are correct.

[@akinstic1]

Thank you for this. God bless you 🙏

[@lizj6739]

That ending was epic!!

[@andyhodgev.a.g1291]

Good informative video this is thanks 🙏🏻

[@robertmullen2480]

good content on this channell , never seen this tool, nice!

[@Keepin-it-wheel101]

A walnut blasting carb cleaning video would be very helpful to the community. There are some up there but not very detail. Specifically showing the position of the valve before starting cleaning process

[@raincitywrench117]

I do have a walnut blasting video posted on my channel. It may have what you are looking for. I appreciate your interest.

[@Keepin-it-wheel101]

@@raincitywrench117, Thank you I found it and it was so helpful...

[@tabrezkhan5909]

Hi amazing 🤩 jus wanted 2 ask something I have a mk5 golf gti 2007 been on off road fr 8 years got it serviced was jerking it’s ok now what do I need to do 2 make run new changed brakes any in put thanks 🙏

[@raincitywrench117]

That's kind of a tough question to give a definitive answer but I will say your best bet is to follow the maintenance schedule in your owners manual.

[@tabrezkhan5909]

@@raincitywrench117 thanks

[@ivanvega2821]

Thank you for your help!! Do you have any experience with the amazon injector seal kits?? It’s drastically cheaper but I’m not sure if it’s worth a try!

[@raincitywrench117]

You're welcome. I have not used the amazon kits but see the reviews are hit and miss.

[@ivanvega2821]

I ended up installing them on the injectors. They looks like good quality as far as I can tell. Only difference I can tell is the white seal seems more… plastic? Not sure how to articulate it. Only one way to find out 😂

[@adhizzle9985]

@@ivanvega2821 which kit did you buy? some are oem but sold to other region with crossed out branding cost $30 for a set with all clips versus $140 at fcpeuro versus $200+ at dealership

[@pecoswild]

How can one tell if the injectors simply need a cleaning as you have done or need to be replaced? We are getting a misfire code on cylinder 2 on our VW. We replaced the spark plugs and it still shows on that same cylinder and the power is down. It’s a 2009 Passat. Thanks for the info and sharing!!

[@raincitywrench117]

The first thing I would do is swap #2 ignition coil with another. If the misfire moves cylinders then you know it needs a coil, which are very common. If no change, then run a compression test. All cylinders should be equal. If coils and compression are ruled out then suspect dirty valves are injectors. If engine has higher mileage then I would almost all but guarantee dirty valves. One common symptom of dirty valves is heavy misfires cold that get better warming up.

[@pecoswild]

Thanks for the advice. I really appreciate it.

[@dailydoseofdestruction6368]

Great Content!! What about a VW passat b6 (model 2008- 265000 km)? I bought it in 10/2018 with Siemens Injectors..used it for 10 months then started to break down..(start, power, ..). I changed the Siemens injectors (which VW don't use anymore) with Continental ones. They work well except for the Number 2.. eeven if i replaced it twice, the car still starts with difficulty and "vibrates'' when changing gear..i.e when about to reach 20000 turns/min.. Could this be anything else than the injector itself? Thank you a lot And Cheers from Morocco

[@raincitywrench117]

It could be a number of things. I would start off with the basics & check engine compression. All cylinders should be very close to each other, if not then you need to address that issue before anything else. I've started many 1.8 & 2.0 liters that misfired for the first few seconds and then smoothed out because of heavy carbon buildup on the valves. I have a walnut blasting video showing how to clean valves. It's a vr6 style engine but same principal applies. kzbin.info/www/bejne/ipiyoKONbc2Zq7M&ab_channel=RainCityWrenchRainCityWrench A scanner would also come in real handy. Hope you get the problem solved.

[@usmanhcbf0]

can Teflon seals be set with a heat gun?

[@raincitywrench117]

Never tried but don't think so. I don't know if teflon will contract under heat but using a heat gun on low setting shouldn't hurt anything to test it out.

[@usmanhcbf0]

@@raincitywrench117 thank you so much for the reply. definitely, heat should be under the required temperature. I only have one time to do for my VW Tiguan mk1 so don't want to buy...

[@golfmaniac007]

Getting new injectors u would have to do this?

[@mdlee52]

Another solid video.

[@gee3883]

Really helpful thanks.

[@GIANNIS86TSI]

Greetings!! I run a 1.8tsi stock fuelling and its time to replace the injectors. Do you have any recommendations for upgraded plug and play injectors with the prospect later to upgrade turbo etc ? I have heard about Audi s3 8v gen 3 engine injectors that works on gen2...

[@raincitywrench117]

I have no experience in that department. It will boil down to injector flow rates which will be listed by how many cc's the injectors flow. I would look at the available high performance kit options like some of these:www.urotuning.com/products/unitronic-mk1-tt-1-8t-big-turbo-performance-software-440cc-injectors-1?variant=12302758346807&Google%20Shopping&gclid=CjwKCAiApNSABhAlEiwANuR9YKc6q9Y2z7LRzMm4Y3CxuFw8MKncnsJR8G2sX0-BMRwthc-LDybEXhoCFZoQAvD_BwE If you run higher flow injectors you will need the ecu software upgrade to drive them otherwise the whole fuel curve will be messed up. Then there's the question of turbo, fuel rail, throttle body, exhaust upgrades, etc. If it were me, I would figure what performance level you want to go and make the change all at one. I would search the vw performance forums to get an idea of what to do and not to do. Cheers!

[@user-qx3ph3xb6l]

I wonder why don’t you replace them instead?

[@nicolomarchillo4451]

Probably cause it’s significantly more expensive

[@harwoods11]

What was the reason for pulling these injectors?

[@raincitywrench117]

I had to remove the intake manifold to clean the valves and sometimes the injectors will stick in the fuel rail and pull loose from the cylinder head. Once that happens, the teflon seals need to be replaced before reinstalling so there is not a combustion leak.

[@ClaudiuB]

When you clean the valves is recommended to also check the injectors, and if you have a tool you can check also how they spray. It worth, at least for the effort of taking everything apart just to get access to the valves.

[@harwoods11]

@@ClaudiuB I agree somewhat although these injectors can't be stripped and rebuilt. I believe only the factory has the correct equipment to do this and reset calibration.

[@ClaudiuB]

Really? damn, and I just bought 4 seals to be prepared for next month when I'm gonna take my car for a carbon clean-up

[@olymes808]

What’s the name of the tools you use?

[@raincitywrench117]

The set I have is Sealey Tools FSI injector remover/installer similar to this one:www.amazon.com/UTOOL-engine-Injector-Removal-Installer/dp/B07DMGT88Y/ref=sr_1_12?dchild=1&keywords=sealey+fsi+injector+remover+set&qid=1618248133&sr=8-12

[@kevinavery2518]

im guessing you do a lot of European vehicles, I'm guessing this is the same kit I'll need for generous motors vehicles

[@raincitywrench117]

Our shop has almost any make and model come in and yes we do a bunch of european vehicles. Before I bought my injector set, I used a coworkers tool to install the teflon seals. His tool kit is a plastic packet with just the install cones and sizer made for GM. It worked fine for the volkswagen I was working on. The set I own is for VW, Audi, BMW, Mercedes? I would be willing to bet it removes, replaces seals, & installs almost any automotive direct injector. It was like $100 bucks. If you want the hotdog set, check out richv5721's comment.

[@kevinavery2518]

@@raincitywrench117 haven't came across a need for it yet, but recently went back to work at a gm dealer, and in my personal experience, dealers never have the essential tools they are sposed to have

[@raincitywrench117]

I have been recommending walnut blasts on just about any direct injected engine with over 80,000 miles. Have done a couple cadillacs, two equinoxes, bunch of vw's, audi's. They pay excellent and the customers are so happy afterwards. Owners don't even know the valves will build deposits, lose power, random misfires, poor fuel mileage. I work with a guy from a ford dealer. He said half the shop tools are missing and some are misused. Good luck in your new job Kevin Avery.

[@kevinavery2518]

@@raincitywrench117 never done a walnut blast, going to have to look into that, and thanks

[@luisag.3719]

Huge video. Thank for do it. See us

[@PaulyD0859]

Your shop is so quiet!

[@raincitywrench117]

The video was shot around 7:00 am just for that reason. Others start rolling in around 8:00. I wish it was always that quiet.

[@romanf5666]

not sure, but I guess, he doesnt know, what he is doing ;-)

[@raincitywrench117]

That is a day in the life of a technician. LOL

[@alexanderschroder6864]

Thank you for this. God bless you 🙏

[@raincitywrench117]

You are so welcome!

[@lizj6739]

That ending was epic!!