2.5T 5cyl 07K Corrado, oh and it's AWD!

[@bennaugler8089]

so cool. 2.5T all the things!

[@cityneckmediallc]

Awesome video. Great to see the 07k community grow and grow!!

[@scottdanner9490]

Love the 2.5 content, please continue your efforts for the vWest of us.

[@codyharper5108]

Glad I found this build I’m doing a 07kt swap on my mk2 gti

[@shinobi211]

Doing a build thread?

[@brandon14790]

Cant wait to see that next 2.5T lol, awesome video!

[@Sam-ci7ic]

i’m pumped , great video

[@v8_corrado65]

pretty cool, i like the cantilever suspension in the rear.

[@JuanLuna-kt9jj]

Very cool swap, more vids of this please

[@allYou.Be1]

Keep such great work , would love to see more of that rear. stand-out suspension

[@rrrrrrtt1]

I had a Corrado too. Absolutely beautiful car!

[@somenygaard]

Me too. Loved that car. A red 1990 G60 with all the Neuspeed performance parts. A 2.5 swap is awesome.

[@TheInfoDeskOfficial]

A list of mods at the beginning would have been helpful but beggars can’t be choosers been whooshing for 07k content for years keep me coming

[@COMotorsports]

Mods are stock engine, IE intake manifold, and GT3582 turbo. Fueling is all pretty basic for this power level.

[@toddwilliams9681]

Dude I'm super surprised & Stoked that a stock 2.5 is getting over 315 hp w/a turbo, man i cant wait to get some money & hopefully send my jetta up north to yall

[@COMotorsports]

We can make more than that. 😉

[@DMACHOLMAN]

Love the Corrado and I have wondered if a 2.5 L 5 cylinder would fit in a Corrado ? Mind blown And you got it working more ! I own a Corrado which has been in my garage for 18 years it's time to work on it again.

[@COMotorsports]

Get to it!

[@DESTROYBONAR]

Have you figured it out yet? I too have a 1990. VW Corrado g60. Sadly it just got rod knock and I want to swap it.

[@DMACHOLMAN]

@@DESTROYBONAR You should get the Bentley Repair Manual. It will help if you're motivated. Body Part's are difficult to find but not impossible.

[@DESTROYBONAR]

@@DMACHOLMAN I already own one, came with the car. Lady I bought it from was very meticulous about keeping records of everything and keeping all paperwork. I even have advertisement pamphlets for the car, all service records, etc. Turns out I am doing an ABA short block swap with the G60 head.

[@R2MK2VR6]

Cool stuff guys love the 2.5 ! Currently building a mk2 vr6 myself got some videos on KZbin .

[@stefvandenboogaart7893]

Ohh, I still forgot something: Ecumaster EMU black ECU and build engine. RS crank, tuscan connecting rods and JE pistons c.r. 9.5. cylinderhead OEM, only Ferrea exhaust valves.

[@geluix69]

Sounds glorious. Surprised about the low torque number for a 2.5

[@alexanderdanielsson6049]

they need to make it that so the rods dont bend

[@workingmanaudio2754]

This is due to the low timing. Have to keep torque low due to the syncro and stock internals.

[@isaacshively6705]

Just bought a MK6 Jetta 2.5 and i love it, I'm gonna keep it NA because for now it's my daily but I ordered the IE intake manifold kit, straight pipe it and some bigger injectors and maybe a fuel pump to start

[@stefvandenboogaart7893]

It's always nice to see an AWD Corrado. I own one, build up in 1996 wich makes it probably the oldest AWD one in the world and most certainly the second build one. Started as a syncro with an G60-16V engine but changed to haldex (4motion) in 2017. After several other types of engines and gearboxes I now have an n.a. turboed 07K under the hood. Specs: turbo EFR 71/63, max. hp 457/6600/min, max torque 557Nm/4500/min, max boost 1.29 bar, manual 02Q hybride gearbox (KZV gears, GRF finals) . Hp and torque are limited because of the clutch and DMF, petrol 98 octaan. In my opinion it's the best combination you can have in a Corrado!.

[@COMotorsports]

Sounds like a great setup. 👍

[@stefvandenboogaart7893]

@@COMotorsports Yeah, it is indeed. The n.a. 2.5 5 inline engine is in the car since 2013, at that time fully OEM with the twin scroll Borg-Warner turbo sitting on certain Volvo models. I could get this turbo very cheep and it was just to try out if I could get everything working. With this turbo and the OEM engine I got at the end 405 hp @ 6500/min and 490 Nm @ 4200/min.in 2015, started however with almost 300 hp in 2013.At that time with an hybride 02S/02C 6 gear gearbox, (JWX x GQM x 02C bell housing and differential because of the golf 3 VR6 syncro drive train). All together a very good and nice combination but limited because of the engine, gearbox and syncro strength. The engine sitting in the car right now should be good enough for 700 hp, the gearbox is because of the car weight (1265 kg) good for about 600 Nm I guess. The limitation now is caused by the DMF and organic clutch plate. 0.1 bar more boost on the dyno during the tune brought already 60 Nm more torque! I would'nt stress the driveline till the end however. To be honest, 450 hp and 550 Nm are more than sufficient for the car, it's only street drived.. A pity you are "a bit to far"😉 to show the car and have some talking. Feel free to ask more questions about the car.

[@tannerhamilton6096]

My 2.5t rabbit has a UM tune so I’m excited for the next vid on that one!

[@michaeldisieno3465]

I'm looking forward to see what UM can do on an unopened 2.5T.

[@COMotorsports]

@@michaeldisieno3465 It's typically around the same power.

[@michaeldisieno3465]

@@COMotorsports good to see. The Iroz team out here builds them to hell and back but I've yet to see a stock block until here.

[@COMotorsports]

@@michaeldisieno3465 We've done a few stock block golf/jetta turbo setups. Working on another currently in a MK5 Golf. We may get some content on that one also.

[@michaeldisieno3465]

@@COMotorsports That would be awesome to see. Forgoing the forged cranked 07k's, it seems they are relatively easy to find in a junkyard these days.

[@hanzy1k]

Now this is a proper sick car

[@volk_empire8671]

Could you do a full breakdown on what is needed to AWD swap a 12v Vr6 in a Mk4 Jetta. What needs to be done and what parts are needed exact details would be much appreciated.

[@COMotorsports]

Mk4...equals a lot of work. Not for the faint of heart.

[@rail176]

This car is insane . Great job on it I Have 2.5 golf and I love the engine

[@christopherbell7561]

Really sad the UK didn't get this engine!

[@nitronamous]

I miss my Corrado! 93 SLC VR6, blew the trans and a new or rebuilt was over $3500. At 19yrs old that wasn’t happening!

[@COMotorsports]

Those trans are like $100 now.

[@Jodi42893]

i love the car.great work

[@martingarcia6354]

You always know where to draw the line. I don't know shit compared to you. Keep on keeping these engines safe. Love the VW

[@COMotorsports]

Much appreciated👍

[@mrsushigamestoo]

Please give us more info in the Synchro swap. I have a MKV 2.5T car, these 07k’s are awesome $200 motors.

[@COMotorsports]

you don't want to do a Syncro swap, hence why we left it out. ;)

[@dalecook5520]

I saw where you said you all are considering piecing together a kit for a the golf Jetta. I think that would be great considering the 07k platform is starting to grow a little

[@COMotorsports]

We'll know shortly if it's going to happen.

[@dalecook5520]

@@COMotorsportscool I would definitely be interested. I enjoy the channel either way though. You guys are awesome

[@COMotorsports]

@@dalecook5520 much appreciated, thanks

[@aronbennett4760]

Oh baby, I need more!!!

[@teemill450]

352 on stock.. 🤯

[@buddysshop1860]

I'm back watching this vid for the 4th or 5th time now. It has me thinking of selling my mk5 gti and getting a mk6 golf 2.5. If I'm aiming for 400whp it would require a bigger turbo anyway. May as well put it on a more reliable and less maintenance engine 👍

[@Russell_and_Rosko]

What did you end up doing? I'm putting an 07k turbo in a 944 turbo.

[@jonathansavaria3497]

Awsome setup ! Would like more info on those air struts for the push rod/cantilever suspension. Im building my own now and would like air ride as well. Thanks

[@kdnperformance1422]

We saved the drawings of all the cantilever setup we made, shoot us a email at [e-mail]

[@beast_e55_amg]

Been wanting to do something like this to my mk6 Jetta wagon

[@COMotorsports]

Do a Corrado 2.5T swap?

[@beast_e55_amg]

@@COMotorsports no I was saying I want to boost the 2.5 that’s in my Jetta and convert it to awd

[@COMotorsports]

@@beast_e55_amg get to it!

[@CorradoRacer]

Awweee awesome! So hyped

[@ilove2playtoo]

allways upvote 5 cylinders

[@brandelljohnson9824]

I love it, im a big fan.... I just picked up a MK6 2.5 CVT and I wanna throw a turbo set up on it. Anyone know how much power these auto transmission can handle?

[@COMotorsports]

I would say you'd be in a very very very limited group of people to try. Good thing is, run it until it breaks and swap it.

[@brandelljohnson9824]

@@COMotorsports Thanks!! its a 2014 Golf 4 door hatch in Nardo Grey it looks wicked whoever had it took good care of it. Ill drive to you when it comes time to get tuned!!!

[@w1ckspencil664]

I'm turbocharging a 1.6i efi jetta from 1996/7. I'm hoping to make 200 whp

[@COMotorsports]

That's a new one. Best of luck.

[@w1ckspencil664]

@@COMotorsports tnx. I'm not really worried about the hp tho, i just wanna run 0.8 to 1.2 bar and make turbo noises

[@COMotorsports]

@@w1ckspencil664 clearly you're not worried about hp. 😉

[@thescalefactorypl9932]

Never thought that 07k can fit syncro gearbox. Anybody knows if gearbox stay in it's factory space or you have to move it to the left side and make custom mounts? 07k engine block is quite long

[@gerg_gti]

I’m wondering the same CO Motorsports

[@thescalefactorypl9932]

@@gerg_gti you are "that" gerg_gti with green MK2 VRt 4motion? I've found owner of that corrado and owner of other 2.5 AWD corrado, got few pictures and information if you need anything

[@jackweisenburger]

Awesome build, very unique. But curious, if goal was only 350whp, why put a turbo capable of 700whp? Seems like its missing out on a lot of midrange power a smaller turbo would do and still make same peak power. Did you work with vvti a lot?

[@COMotorsports]

Cause the goal was not 350whp... but you gotta start somewhere. Getting this engine in this chassis, turboinging it, AWDing it, bagging it, etc etc is not a cheap adventure. So sometimes you have to cut costs where you can, in this case consider it proof of concept. This was started 7 years ago, before many were doing these swaps... now that it's all come together it will likely get the engine it deserves. However 350whp and AWD in this car would be a wicked fun car.

[@jackweisenburger]

I understand, and it wasn't meant to be negative comment at all, was just curious as you spoke about the power limits of synchro awd. Its a great build and I love it. I'm have most of the parts to swap my 01.5 s4 avant to 07k, just waiting on a good oil pan solution for longitudinal

[@COMotorsports]

@@jackweisenburger Didn't take it that way, legitimate question. Best of luck on your project.

[@rogerj412]

Cool car but can we stop stretching tires already? How hard is it to fit properly sized tires on a car?

[@qaza007qaza]

Guys what 2.5 motor is it?in the UK we had a v5 only in golf,bora(jetta)bettle&passant I own a Ford 5 pot nothing sounds better than a 5👌

[@COMotorsports]

This is not a VR5, we never got that engine here. This is the straight 5cyl 07K engine found in the Golf/Jetta.

[@xaviergli20thedition27]

Can you Make a video of you guys shifting gears when doing dyno

[@justinc.6339]

I wanna see an awd 1.8t b5 tunned. I wanna see what a q.8t awd can do

[@COMotorsports]

A 1.8t engine doesnt care what driveline is attached to it. So any of the videos we post of 1.8t is relevant.

[@colbytyree2592]

My favorite vw ever made

[@COMotorsports]

It's up there for me also. Also really dig the MK1 Rocco.

[@colbytyree2592]

@@COMotorsports I had a scirocco and sold it for like 500 bucks a few years back had a straight body on it

[@jovanymartinez6417]

So where is this time shop located I have a 07k Jetta I want to tune new to the area

[@COMotorsports]

East Coast Canada.

[@ottoheinz7393]

Great build, can’t wait to see more. Did you guys swap the stock crank pulley for a 2.5TFSI TTRS/RS3 unit? Bolts right on, helps prevent belts from slipping off at high rpms, and it’s viscous.

[@COMotorsports]

Completely stock engine, just with turbo gear attached.

[@ottoheinz7393]

Guess what I meant to say was- you should install one. I’ve built a couple 2.5Ts and it’s a worthwhile OEM+ modification; especially when you’re spinning 7k+ rpm.

[@COMotorsports]

@@ottoheinz7393 thanks

[@AMWG80M3]

i would love to see these cars on the road after dyno's.

[@COMotorsports]

Not always possible, but we'll see what we can do. Thanks for the input.

[@Benny_From_NY]

Wonder what the car weighs in that current setup

[@burns985]

Is this the same engine as in Audi TTRS? Or the 2.5TFSI in Transporter T5 ?

[@COMotorsports]

Mk5/6 golf 2.5 07K.

[@whatsaninlinefive7009]

Hey guys, dope video. Using VEMS, how har was it to tune? Did you also include the stock VVT feature?

[@COMotorsports]

It's wired in, but we did not use it during this session. I spent 90% of the time configuring the ECU and figuring all the things that were messed up in it. The tune itself took little time. Point being I would have much rather put my knock ears on and listen for detonation, and setup VVT but time just didn't allow for this one unfortunately.

[@Luivibe]

I have a 2.5l but nobody builds em can you show more?

[@COMotorsports]

We can build it, ship it in.

[@Luivibe]

@@COMotorsports Where can I contact y’all?

[@COMotorsports]

@@Luivibebottom of our website.

[@JoshuaRowe-n6t]

Think y’all can turbo my Jetta 2.5l looking around 600-800whp was looking for a turbo kit and forged internal but can’t find them

[@COMotorsports]

No problem at all

[@JoshuaRowe-n6t]

@@COMotorsports where can I set it up at ?

[@COMotorsports]

@@JoshuaRowe-n6t email us

[@scadieee]

Is there a build thread for this !?!?

[@COMotorsports]

No sorry.

[@CircaXZion]

Dope I wanna turbo my 2.5!

[@COMotorsports]

Do it!

[@matthewlong5687]

how much would it cost to get my 2.5 tuned with a turbo?

[@COMotorsports]

Depends on power level, software provider etc.

[@matthewlong5687]

I want to start with stock ecu and internals while i fully build another one for high boost. But just lookin for about a 10 psi tune for reliability maybe with a 13 psi for a fun time here and there. Probably gonna keep the 5 speed for the low boost so aiming around 250hp so i dont completely destroy my trans. Will have a 6 speed for big boost

[@COMotorsports]

@@matthewlong5687 Just put the money into your 5spd (diff etc). The 6spd stuff just adds a ton of unnecessary expense as everything's way more money as we've seen the break at similar power levels.

[@matthewlong5687]

@@COMotorsports Ok thanks for the advice. I plan on doing an awd swap on my mkv body once i do the high hp build because it would be crazy to leave that on a fwd platform, but id prob start with diff pins for the low boost, prob wont need an lsd unless i start to notice i like to do burnouts haha but stock diff should hold for rolling pulls i think.

[@COMotorsports]

@@matthewlong5687 Well that's a different story.... Check out our AWD conversion series.... it's in a MK5 as well.

[@Mikes_bikelif3]

i would like to see a mk4 awd conversation if it wasnt done already

[@COMotorsports]

Conversation. We can talk about it here.

[@rebeccaedwards3784]

Cool car, but I thought these engines made more than 350bhp stock? or is that only in the TTRS? Also.. where's the *AWD* at? Rear wheels weren't moving?

[@COMotorsports]

The AWD is under the car where it should be. This is a Golf/Jetta 2.5L. Stock they make about 140-150whp.

[@dubCanuck1]

I have GOT to get my Syncro Corrado on the road this winter now. 1.8T AEB. Any recommendations for a turbo and tune to run 300 hp (on b4/a4 or b5 ECU if needed. I have options). Not looking to go BT as it'll be an aitocross/road track car. Will eventually put in a haldex.

[@COMotorsports]

Well anything bigger than stock is considered a "big turbo upgrade" to most. You won't make 300whp on stock turbo. I suggest gt28 or better yet gtx28. Insane spool and with AWD it can take all the early spool/power.

[@dubCanuck1]

@@COMotorsports thanks for the advice. I'll probably reach out after she's running. Love the VW content!

[@COMotorsports]

@@dubCanuck1 thanks and no problem. We can set you up with the perfect turbo for whatever you're doing with the car. Just hit us up. Good luck with the project.

[@andrelariviere9425]

Any suggestions on what turbo an and intake manifold to get for the 2.5?

[@COMotorsports]

The IE intake is great, turbo all comes down to power goals and what the cars being used for. Not a cut and dry answer.

[@SixPs96]

I want to do that to mine!

[@COMotorsports]

Get to it.

[@Ricky-manic]

Do you guys make your turbo manifolds ?

[@COMotorsports]

Depends what's available, and what power they're capable of. I've built a bunch and I'm building one for my 2.5t, an r32t, and 2.0T TSI very shortly.

[@Ricky-manic]

@@COMotorsports I wanna turbo my 2.5 jetta I do plan to build a motor for it to handle 14PSI of boost

[@COMotorsports]

@@Ricky-manic do it

[@FORDLYFAOTEAROA]

Pretty impressive numbers considering it's unopened on 91

[@COMotorsports]

Thanks, although we shared more so because of the car itself not the numbers. Plenty have made this power on stock engine before. Just not in a Corrado with AWD. :)

[@PostMeridianLyf]

Love it, what transmission are you using?

[@COMotorsports]

It's a syncro setup in this car.

[@samdavinchi1624]

What was wrong with the 2.9 VR6.??

[@COMotorsports]

???

[@Shawnix86]

If it is AWD, why are the rear wheels strapped down?

[@COMotorsports]

If you’re confused, watch our video “How to dyno a Haldex Volkswagen or Audi on a 2wd dyno” we did a little bit ago. That should help you out! In this case, the customer disconnected the drive shaft since it’s a syncro setup.

[@trentonchurchill7203]

How about some Audi b5 or b6 content????

[@COMotorsports]

Pretty unlikely around these parts. The couple that were built are long gone unfortunately.

[@demonico123456789]

How did you get rear wheels to not turn on Syncro?

[@COMotorsports]

The drive shaft was disconnected.

[@jdportwerks6795]

Dave this is a trip that sounds like it’s revving to 4 or 5k rpm. Hat is it you are revving to?

[@COMotorsports]

This one was like 7300 or something like that.

[@jdportwerks6795]

@@COMotorsports wow didn’t expect that! Sounds like you were barely revving.

[@COMotorsports]

@@jdportwerks6795 yeah turbo's a bit lazy for the RPM it's running. I'm doing a similar setup on my daily, same turbo, little smaller turbine housing and another 1000rpm, power band will be a lot better.

[@boosted0075]

Corrado 5 cyl.....can it get better? 😍

[@COMotorsports]

Don't forget AWD also. :) So no, not much better.

[@boosted0075]

@@COMotorsports that car it's like a dream for me. I'm in love with that engine. The corrado is one of my favourite cars of all time. And as you said..AWD. Awesome work 🙌

[@Fishi413]

Ok so I found an audi tt vr6 mk1; whole running car (stop and go) just rustyand some other things might not pass inspection... guys asking 1000 minimum since it’s rebuilt title. I want to do a rabbit w the drivetrain swap minus the vr6. Need opinions and insight. If you read this; how may we get in contact; I’m in Massachusetts thank you have a beautiful day.

[@COMotorsports]

I have a MK1 which had been covered to AWD as well. We can take care of you for sure.

[@Fishi413]

@@COMotorsports it sold sadly, but my eyes are still on a vr6 Audi TT mk2, because an R32 is a bit out of price range for a good low mileage one. I'm thinking hpa dtm kit w united software. What's the outlook on whp. I wanted 350 hp w torque to match and a water meth kit for track. is that possible on stock drive train or should I just buy a 1.8 or 2.0 since piston and rod combo would be less expensive, I just don't want to throw money at it w/ rhyme or reason.

[@COMotorsports]

@@Fishi413 there's a video of a an R32 Turbo on our channel. Check it out, no problem hitting your goals. The 3.2 A3 with HPA wasn't quite there.

[@raymondzenzelencube5463]

how did you get ride of bipping noise?

[@COMotorsports]

It's just in the cluster can ground it the sensors or hook them up properly.

[@ralphmag3072]

To get to 450hp with E and 91, what engine internal mods need to be done?

[@COMotorsports]

Wheel HP you'd need to do internals.

[@ralphmag3072]

@@COMotorsports which ones? Rods and pistons?

[@samwest5710]

What are the wheels on it

[@brunobeaudin4764]

Autostrada modena of a 94 Ferrari

[@arikkuperman]

shouldn't the real wheel spin if this is a AWD?

[@COMotorsports]

Of course, but not when it's disconnected.

[@NikolaosVisuals]

writen out mod list? internals?

[@COMotorsports]

I think we mentioned that it was an unopened stock engine. 100% stock!

[@alexs1172]

@@COMotorsports could we get a build breakdown of the car? I'm interested to know the turbo specs, exhaust manifold, fueling, that bonkers suspension, etc

[@NikolaosVisuals]

CO Motorsports im only asking because its my grandfathers birthday so i wasn’t actually listening to the video

[@NikolaosVisuals]

CO Motorsports how much boost do you think a stock motor can take (as a daily)

[@COMotorsports]

@@NikolaosVisuals Typical daily 2.5L setups are around 14psi. However you need to keep in mind boost numbers mean very little. Meaning 14psi on a Gt28 is completely different then 14psi on a GTX55.

[@SLOBALT2009]

Awd but the rear tires are strapped down?

[@COMotorsports]

yep, and the drive shaft is disconnected. Which all makes sense when dynoing an AWD car on a 2 wheel drive dyno.

[@snoopdaclown]

Do yous have a turbo kit for it? What turbo manifold are you using on it?

[@COMotorsports]

Definitely not for an AWD Corrado, but we're considering piecing a kit together for the Golf/Jetta.

[@snoopdaclown]

@@COMotorsports that would be great. You would make so much off of that. I have a 2011 jetta 2.5l pzev, did the electric power steering swap so I can use the i.e. sri manifold and also got the billet fuel rail and billet valve cover for it. About to get it tuned soon. Stuffs expensive and hard to come by for the 07k. Would love to see some love for this 2.5l

[@WolfHausMotorwerks]

nice!

[@COMotorsports]

Thanks!

[@aidansquires5289]

What transmission in that 02C ?

[@COMotorsports]

yes

[@brockklein2904]

Would you guys recommend lugtronic for a 1.8t track car?

[@COMotorsports]

I run Lugtronic in my MK3 drag car which you will find videos of on our channel.

[@tomthompson7400]

couldnt you get a 3.2 vr6 into it then along with the a3 quatro system , and make a proper job of it ,,, tat aside , well done I really like Corrado's.

[@COMotorsports]

Why overcomplicate things, and ruin the car more then needed. This fits easy and works. True quattro is a lot more hacking.

[@tomthompson7400]

@@COMotorsports we dont get that engine over here in the uk , it looks like a great conversion , Ive owned a few 5cyl motors , Volvo and Audi and loved them , its the noise .

[@rarenium2500]

This is the way: kzbin.info/www/bejne/jmXdc36rqrd1h7s I keeping mine stock/oem+ tho.

[@joonatansaarinen8715]

I have a g60 with 50 000km german spec with bbs rm two piece and bbs steering wheel OEM+ ONLY

[@COMotorsports]

Very nice

[@mushasho]

Must be boring not being able to turn the boost up

[@COMotorsports]

Nothing boring about that power in a relatively light car. Also its way more exciting then the previous 8hrs working through all the issues. So yes getting to this point is always exciting.

[@mushasho]

@@COMotorsports were you able to dial in variable cam timing with VEMS on those pulls?

[@COMotorsports]

@@mushasho There was no time left. The car is from 5hrs away from us. We did everything we could with the time we had with it.

[@mkvdrvr1003]

More 2.5T Please ;)

[@COMotorsports]

Some coming

[@anonlincracing2484]

Savage sounds 🔥 coming out the bk of that corrado

[@COMotorsports]

Fo sho

[@dantemagz6672]

thats such a cool build, wonder how the haldex bolted up?

[@alexs1172]

They said it's a syncro setup, not a haldex.

[@COMotorsports]

@@alexs1172 Correct.

[@hopperrene6211]

Corrado 🥰😍🥰😍🥰

[@action76news]

Where is this shop at I got a GLS 1.8T

[@COMotorsports]

East Coast Canada.

[@jeromegouin3449]

Can you provide me the name of the owner? Id like to ask him some questions

[@COMotorsports]

Not for me to share sorry.

[@imthekingofrs2]

What software do you use to tune that? Is it stock ECU or standalone?

[@COMotorsports]

Umm... it's in the video. :)

[@imthekingofrs2]

CO Motorsports yeaaaaaah I was too hyped lol I see now. Thanks 😊

[@MrDookie1213]

What rear suspension is that

[@COMotorsports]

It's on air, and it's custom.

[@lukejenkins9341]

What engine sounds more volvo then audi

[@COMotorsports]

Info is in the video and title :)

[@user-pg6bl9mr6g]

What state are you in???

[@COMotorsports]

No state. East Coast Canada.

[@doppamonks9983]

Some Audi A4 b7 2.0t’s pleaseeeeeee🙏🏾

[@COMotorsports]

Ironically we have one on deck, which we're going to try and film. Unfortunately it will be just street tuning and going over the build. But it's a pretty extensive setup.

[@femmefataleracer]

in. fuckin. love.

[@COMotorsports]

Hard not too be.

[@WhuTeFuqq]

Damn 91octane? Seriously? In austria we drive 98 regularly and 102 for fun...

[@blackace4423]

It's not the same equivalent...91 in the US is like 95 in Europe.

[@COMotorsports]

What's said above... it would be your 95.

[@WhuTeFuqq]

Didn't know that! Sry. Then its ok. But better higher. Lot of powerboost i think.

[@COMotorsports]

@@WhuTeFuqq better fuel, more power for sure. However were still have limitations with the stock engine in this case.

[@cooperwilliams4686]

Should have always been 4x4. Was just a fat gold otherwise.. Always liked the look though.

[@COMotorsports]

Much nicer looking for sure.

[@jeancharlesrabaux5658]

Corrado sirroco vw tres rechercher en europe sa ce fait rare

Vems is like best hardware/worst software

[@COMotorsports]

We feel your pain. Lol

@@COMotorsports do a tutorial on them!!

[@COMotorsports]

@ on Vems? No thanks. lol

[@keymeyer2318]

:) WoW

[@jacoblight1349]

What exhaust manifold does it utilize?