2 No-Nonsense Ways to refill Brother cartridges: LC 61, 65, 71, 75, 79, 101, 103, 105 and more

This video shows how to refill Brother LC16, LC38, LC61, LC65, LC67, LC980, LC990, LC1100, LC 61, 65, 71, 75, 79, 101, 103, 105 printer ink cartridges. Special thanks to James Mears, who provided valuable insight and detailed advice for this project.
Timeline:
0:00 Introduction
0:47 Let’s Get Started
1:42 Prepare the Nozzles
For other helpful videos, go to / bchtechnologies
For printer repair:
🢡 Visit us: BCH Technologies, 506 Radar Road, Suite B, Greensboro, NC 27410.
🢡 Send the printer for repair! bchtechnologies.com/printer-r... Yes! We repair DTF, DTG, and sublimation printers too!
🢡 Donate your printer to us! Contact [e-mail]
More support options for your printer device are available at support.bchtechnologies.com
Continue the Conversation: [e-mail]
FACEBOOK: / bchtechnologies
TWITTER: / bchtechnologies
INSTAGRAM: / kevinatbch
LINKEDIN: / bchtechnologies
TIKTOK: / kevinsinknmore
SHOP NOW: bchtechnologies.com
About BCH: BCH Technologies is an innovative company focusing on ink and related products. Founded in 2011, the company transforms how people and businesses refill their printers through innovative technology solutions. Our core purpose guides the research direction of 1) preventing land waste and 2) bringing customers better products with lower costs. Every day, over one million ink cartridges are thrown into landfills worldwide. The company has focused on working with businesses of different sizes, from Fortune 500 companies to entrepreneurial starters, to develop custom ink, spanning from printer ink to stamp ink, re-entry ink, indelible ink, redaction ink, invisible ink, and more.
This video was produced by Kevin at BCHTechnologies.com.

[@danbobakov]

That voice and the music in the background makes it sound like he's showing you how to neutralize a bomb

[@jellymaddeland5218]

Hahaha, I know what you mean. I don't know why he chooses to use the computer to speak for him.

[@George241312]

Thank you Brother !

[@moss8448]

was able to refill an LC3011 cartridge...it didn't have an air bleed valve...but... it works by golly...👍

[@newdimension2012]

hi. liked your video. can you recommend brother printer for home use with cartridges that dont have a chip and are easily refillable? thanks.

[@jwrobin21]

Get more life out of your Inkjet Cartridge. Prop the front of the printer up by about 5 cm (some books are good for this) causing the ink to run to the rear of the cartridge and get extra value but fill the bottom tray with paper first. For Yellow Cartridge, use a Black Marker to ink over the window (half way up the side that the nozzle is located) to fool the printer into thinking the cartridge is still full and allowing you to extract the extra remaining cc's.

[@angiep5216]

Good video but I can’t open one of the side of the cartridge. The part with the big plastic side from where the ink comes out.

[@martingolding4951]

I have s new brother printer with cartridges lc3217 etc lc3217 was low so I couldn't print so I decided to have a go at filling up the little ink window atbthe top of the cartridge I drilled a small hole filled and the printer recognised it as full even though there are chips on them I filled the rest of the cartridges and all are full no questions asked from the printer or errors saved my lots of money £50 for a cartridge resetter

[@gurubandhukhalsa9193]

I just tried this. I could not get the glue to go into the hole because it was too small and also I could not smooth the glue like you did. Will this still work? I also was wondering if the detection will still work out right because the glue is not smooth. Where are the detectors? It seems like a way for the the manufacturers to just make money by having the detectors turn off when the cartridges are still filled.

[@j.rnobleza457]

Why didnt you use the syringe in the first cartridge?

[@sto2779]

How do you chip reset LC401 ink?

[@BoHoGoJo]

At first I was thinking, "WOW!! This working great!" Then it started leaking...and kept leaking and leaking. It seemed it leaked more than I added. What causes the leak?

[@richardkonsky]

You added too much that is what caused the leak there is a regulator inside it to prevent it from filling too much so it leaks out the excess. just let it sit in a disposable bowl for 24 hours or till it stops leaking.

[@brammese153]

cool

[@DR-um2bv]

If you refill up before cartage is empty will that reset the chip ,let's say keep full around half empty

[@BCHTechnologies]

These old Brother cartridges don't have chips. As long as you have ink in it, it's gold.

[@DR-um2bv]

@@BCHTechnologies I have lc3011 which has a chip

[@keto4life197]

Use with "DIY Inkjet printer head cleaner,simple,cheap,effective" solution and save €€$$

[@abbasali3100]

I jave an epson ink can i use it with lc39 cartridge

[@BCHTechnologies]

Yes

[@moss8448]

did I hear North Carolina?

[@paterfamiliasgeminusiv4623]

Well, thanks to you, I almost ruined my cartridge.

[@themintzz9778]

Nice full of ink drop out from the bottle and full oof hands filled with black. *THUMBS UP* and the ink doesn't go inside as well. And I have to wash the cartridge. Guess what there's a bit of water inside. What the heck. Guess what, when I put it since they cant detect the ink, Noice. :DDDDDDDDDDDDDDDDD

[@fseuss]

what the fuck