2005 TAHOE EVAPORATOR CORE REPLACEMENT!! THE EASY WAY

Quick and easy way to change evaporator core on 2002 up chevy trucks #redbanksclassics #evaporator #core

[@MRRANDOM1]

Great Video Banks That’s Much Easier Than Pulling out The Dash! Ive learned Something New!🔥🔥💯💯

[@thedailycloudjh973]

Thank you I was wondering what that green liquid was coming from after I poked a hole in the filter time to pull out my grinder😂😂

[@RedBanksClassics]

May have cut too deep 😂

[@diego3ful]

Exactly where mine was leaking, it took me like half year to find it,

[@realeyesrealise7835]

Thank God for this video 🙌🏻

[@RedBanksClassics]

Hope it helped you out!!

[@makalister668]

U r the one bro! Thanks for the advice!!

[@RedBanksClassics]

👊👍

[@moondiver8652]

very helpful 👍

[@benshort87]

Man thank you so much! Mine blew the other day on my 04 Escalade and I was not trying to do the whole dash pull to replace it.. Think I have to replace my blower motor too, but at least I know how to get to the heater core.

[@RedBanksClassics]

Glad to help👍

[@bounmyphanomphone2398]

🙏Thank you make ez way 👍👍

[@perezxavier4981]

Thanks sir you video help me save me some money

[@RedBanksClassics]

Glad to hear 👊

[@_JerryLopez_]

I was about to bypass the heater core, but now after seeing this vid.... heater change out...check!

[@RedBanksClassics]

Glad it helped you out 👍

[@Bigislandguy]

Ha😂 well I’ll be dipped!

[@SBD_Tank]

is that spray insulation you used to put it back together

[@TheCanadianBubba]

Pretty tricky ! you will get lots of views in a couple months : ]

[@RedBanksClassics]

The KZbin algorithm is pretty tricky. 1 viral video can get you big overnight. I dont care to be "internet famous " but wouldn't mind getting our monetization turned on. Gotta get 1k followers and 4k watch hours to do so

[@tacomaster7411]

👍

[@Vampirebear13]

Reminds me of the nightmare of replacing the heater core in my 1986 Ford Ranger, years ago.

[@RedBanksClassics]

They should make this easier from the factory

[@Vampirebear13]

@@RedBanksClassics That's what makes older vehicles better, when they break, they're much easier to work on.

[@nycboy121]

What is the white stuff you put around the evaporator? How has it been working since doing the job?

[@RedBanksClassics]

We siliconed/great stuffed it back shut. It has worked perfectly for a year now.

[@nycboy121]

@@RedBanksClassics what brand silicone?

[@RedBanksClassics]

@@nycboy121 I honestly don't remember probably some left laying in the toolbox, that was so old it was hard half the tube

[@texasmike7994]

Is there o rings or seals that have to be replaced on that evaporator?

[@RedBanksClassics]

Yes, but the evap comes with them......atleast the one we got for it did 👍

[@nycboy121]

How did you put the plastic pieces from the housing back together?

[@RedBanksClassics]

Jb weld

[@nycboy121]

@@RedBanksClassics thanks, I just finished the job took me 2 days because I did not cut the hole big enough and kept trying to shove the new part in....lol. I had to cut more of the plastic housing and now I have the 2 big pieces from the front 2 narrow pieces from the front to make the hole bigger and a bottom and top piece that cracked off when I tried to bend them. Also I shaved off a little from one of the plastic guides inside the housing which created another hole. I am going to try to seal it with flex tape from the outside since I got the part finally in its spot. I wish there was a more detailed video showing where to exactly cut so I would only have 2 piece to put back together. I hope I can put them together and seal everything so there are no leaks or air escaping.

[@RedBanksClassics]

@@nycboy121 all else fails, flexseal

[@ministerfrank4Christ]

@@RedBanksClassics Thanks I finally put the part in place now to try to seal it up. Will let you know how it goes.

[@johngodwin7902]

Is the glove box able to go back? I was thinking you cut off the glove box box brackets

[@kidslostboxed]

how does the glove box look when you put it back in

[@RedBanksClassics]

It’s normal.

[@JamesValentineBaja1000]

Ya do that up a customer's suv. 🤦‍♂️

[@jacobrisner2716]

Just gonna leak threw the tape this is pretty stupid, previous owner on my Tahoe did this now I gotta pull dash and get another one

[@RedBanksClassics]

Seal it better and don’t wast 2k on a 1k truck. This one doesn’t leak

[@oldcroneysgarage9739]

Can you translate this? Yvehc

[@RedBanksClassics]

Hahaha