2006 Honda Civic Inner Fender Liner Tutorial

[@patterbt]

Thank you so much for posting this!! My kid just ran over a mailbox and cracked off a piece of her bumper cover and it ripped out the (still attached to bumper cover) fender liner. So now I can use your video attempt some re-assembly.

[@nukem384]

That almost what happened to this car, but a friend pulled too far up on those cement parking blocks in the front of a spot, backed up and ripped the under splash guard and a piece of the fender with it.

[@Ohio-Patriot]

@@nukem384that’s what happened to mine too. I’m getting ready to go get some clips but I wasn’t sure how many it took. So the very first picture of your video is exactly what I needed. Thank you sir.

[@keithyoung7]

Nice work and excellent advice - thanks - looks like the family were close at hand in case you neede guidance.

[@nukem384]

Thanks! Lolol. I think they were just bored. I normally do all the car maintenance on all the cars, so usually it's the other way around :D.

[@andcind1]

Thanks for posting all this!!!

[@nukem384]

Glad it helped

[@steveedwards1684]

The engine splash guard at 0:15 I'd the piece right there shown attached to the entire splash guard that goes under the engine? I seem to bee missing those on both side but rest of engine splash guard seem to he there still, my wheel liners both ripped off while driving, I think thos sides got ripped off. Please advise

[@nukem384]

You're in luck because at the same time of this video, I also did a tutorial on that splash guard as well. But to answer your question, yes, those pieces are connected to the under side of the engine. kzbin.info/www/bejne/jJLUep-dn6yCaM0

[@brettoberry3586]

Great video on the item I needed help with today. Nice camera work and narrative.

[@nukem384]

Thank you! Appreciate it!

[@monkeyyo8972]

the right side on my inner fender ripped off on the freeway.. since it didnt come off gentle, will there extra issues for me to replace ??

[@nukem384]

I think you should be fine as long as you order the set of clips in the description. Those are going to be unusable if the liner was ripped out. I can't tell you since I'm not there, but I would think everything else should be ok.

[@mokwils]

Thanks for sharing. Fixed the car following your guidance. Also, thanks for sharing the links for the parts.

[@nukem384]

No problem! Glad the video was helpful!

[@osmana8506]

Are the same clips used for fender line and undertray?

[@nukem384]

Yeah same ones. If you get the set linked in the description, you'll have everything you need.

[@timothybrady9302]

Can you explain the link for the tapping clip? If I buy the 'multiple size clips' set do I also have to buy some of the 'tapping clip - for bottom portion of the liner'? Or does the set have all I would need? Thank you!

[@nukem384]

You need to buy the tapping clips separately from the "multiple sized clips" link. The tapping clips are special and don't come in those general clip packages. So 2 links you need to click from the description :D

[@timothybrady9302]

@@nukem384 Awesome. Thank you! Do you happen to know how many are needed??

[@nukem384]

@@timothybrady9302 Looked like it was 2 per side. I watched the video lol. I don't exactly remember, but I'm pretty sure that's it.

[@keviin4338]

Do you think I can use just one box of the clips you linked for two fender liners? Or should I buy two? Also which clips size do I use?

[@nukem384]

1 is enough. I used it on this fender liner and an undercarriage liner with more to spare.

[@golemnety]

Do you have to take the wheels off?

[@nukem384]

It would make the job 100 times easier if you did.

[@steveedwards1684]

Hey thanks for the help yesterday or the other day. Lol, um just one more question, can you please tell me the clips I need for my 2007 Honda civic si. For the wheel liners and the engine splash guard. Please

[@nukem384]

Check the description. There's links to the clips you need. Here's the link amzn.to/3eLwppg it has all the multiple size clips you'll need.

[@jayp9450]

Perfect 👍🏻 video

[@nukem384]

Glad it helped

[@shamouta]

Hello my friend. Please can you tell how many clips and what kind of clips do I need to install the line fender

[@nukem384]

There are markings right at the beginning of the video on how many clips and there's links in the description on what kind of clips to get. 1 box is more than enough to cover all the clips for this install.

[@longbeach96]

Would you know if 10mm clips will fit. I ordered some from Amazon and I'm unsure the diameter sizes for the holes.

[@nukem384]

Probably should've just ordered the assorted set in the description because I'm not 100% sure, I think it's actually the 6.8mm or 8mm clips that will work. I believe the 10mm clips are too big for this liner.

[@rjaypantojan1508]

Hi do you have clips that are still attached to the side panel on the engine bay on the honda civic cause im having a hard time to find those online and i dont know the side on it

[@nukem384]

There's a link in the description to extra clips to buy if you need some

[@rjaypantojan1508]

nukem384 do you have also a link on the clips for the engine bay side panel covers there were 3 holes on the left and 2 holes on the right.. it seems that they are christmas tree clips

[@nukem384]

@@rjaypantojan1508 Sorry, don't have a link for that. If you go on a site like hondaautomotiveparts.com, they'll have them as they are a Honda dealer with genuine parts. I use them all the time to buy genuine parts

[@smolhamster]

Does anyone know the cover behind the spring? I just bought a used car and it didn’t have that cover. So whenever I look at the front spring, there’s an open space behind it and i can see all the way to the other side of my car (so for example, if there’s a car parked at the other side of my car, i can see the car if i look through that opening behind the spring)

[@nukem384]

That's how the car was designed. There is no splash guard for that area. So yes, you can see all the way through to the other side. A bit weird, but it's normal.

[@manufacturedbeats]

Did these work fine for you? I kept reading people saying they were thin.

[@nukem384]

Yup. These come stock on the car from the factory. Ours got messed up due to a small accident, that's why we had to replace it. It wasn't due to it being old or thin.

[@mikepugs95]

Is the kit you linked in the description ALL the clips? My old liners are loose and I got new ones but I’ve been trying to find the right clips for them

[@nukem384]

Yes. The kit linked has many different clips and should work for just about any clips you need

[@christopherhughes6603]

Hope mine goes as smoothly...😁😎

[@nukem384]

Good luck!

[@edrenanrojas]

Great video! My splash guard was damaged a couple of days ago and noticed both L and R fender liners were damaged as well. Do you recommend to replace one first before the other? I'm thinking the fender first then the splash guard? Thanks!

[@nukem384]

You're in luck because I actually have a tutorial for the under splash guard too (link below). Do the splash guard first because you need to undo pieces of the fender to get the splash guard out. kzbin.info/www/bejne/jJLUep-dn6yCaM0

[@F1MechNoah]

My issue is Idk what size clips go where?

[@nukem384]

I believe for this liner, it's the 6.8mm or 8mm clips that fit most of the holes. I would just buy the assorted pack in the description and not worry about it. You'll also need the tapping clips also linked in the description.

[@F1MechNoah]

@@nukem384 I actually watched the video several days ago and ordered the stuff. Thanks for the help!!!

[@nukem384]

@@F1MechNoah Awesome. Good luck!

[@-CCdude]

Good video guy--- but invest in a clip removal tool along with the screw driver you use, makes the job a lot easier.....

[@nukem384]

Haha I knowwwww. I don't have to remove clips very often, so I always pass. I should just buy the clip removal kit in my own links.

[@larrywuzhere3866]

Thanks for vid

[@nukem384]

No problem! Glad it was helpful!

[@Anthony-jr3ix]

Buy it OEM. The only reason I’m here is because aftermarket is giving me the hardest time

[@nukem384]

Agreed. I try and always buy OEM. Aftermarket is asking for problems, sometimes. Good luck! Hopefully you can fix yours!

[@MrKiLLa2195]

Where can i get the original ones honestly i rather get them original instead of these fake ones from amazon