INSTALLING NEW FENDERS LINERS 06-11 8thgen Honda Civic Si

[@kenkelly1836]

You make it look easy! Thanks for the information. I quit after I tried to realign the new liner. And your video showed me a lot and answered a lot of questions

[@EvilStreetShark]

I'm glad the video helped! I'm going to make some more 8thgen Si videos!

[@justinclendening8428]

Thanks for the video man. I need to install new liners on my 08 si and this was very helpful

[@EvilStreetShark]

Np!

[@anthonyshepard9606]

Amazon has a clip retainer kit. This is what U look up: GOOACC GRC-30 120PCS Car Retainer 6.3mm 8mm 9mm 10mm Expansion Screws Replacement Kit Bumper Push Rivet Clips, 1PC Fastener Remover. ($10.35). It comes with the removal tool also. If you purchase inner fenders it's worth the extra day to order this kit from Amazon, then you can break all the clips you want to removing the fenders. By the way, he would not have had this problem in the first place if he had lowered the car. LOL. 🐢🐢🐢

[@briant2667]

Great video. I have a 2011 Honda Civic LX and just purchased both front fender liners and all new clips. Total $228.87. Going to attempt replacing both tomorrow.

[@IronReef77]

If anyone happens to break their clips you can order a bag of specific clips for you car in advance off Ebay or Amazon. Not expensive at all. I like how he said he never did this before but just decide to go out and get your hands dirty lol. That's how you di it bro

[@marksystemed4678]

Shouldn't those two bricks be behind the back wheels? If the car rolls back they won't prevent it from doing so.

[@thebigswede1736]

Thank you! This is going to help SO much. Especially those bdamn square hole clips

[@EvilStreetShark]

Np!

[@forrestgill3829]

Thank you for the great video. I love how you own your imperfections! Awesome and so helpful!! :) - Frosty 2009 Honda Civic - 225k and counting.

[@robertoalvarez6949]

The part number helped the square one where the screws go in after thanks.

[@jeffroth5778]

They have a pry tool for removing the clips I put my fendar liner in to this. Video helped me a lot thank u

[@jeffhibono]

Good stuff brotha

[@EvilStreetShark]

Thank You!!!

[@achu2022]

great video man!! i'm going to replace mine and this video helps a lot

[@mil3nk0o0]

Awesome vid. Very clear view and very educated. 👍🏽

[@Val_tini.]

Thanks for the video! At 12:00… What is the name of that cover with 3 bolts on it? 🙏

[@cheezyburg3r578]

nice video but i think you put the wheel chuck (brick) the wrong side bro. It should be the back side. Safety first.. lol

[@ridewithjash]

Efren Ojeda depends on the hill

[@jeffmays7192]

Stick your driver under the pin and pry up until its loose enough to turn. Then turn it 180 degrees then they will come out easily.

[@scottfullmer4978]

Very helpful thanks!!!!!!!

[@AnJuice219]

my man hittin the gym too hard.. poppin all types of clips. lol

[@EvilStreetShark]

Lmaoooo

[@AJIMPORTS]

Sometimes the simple mods are the most important.

[@EvilStreetShark]

That is true!

[@tsmalley7293]

Thanks for the video I had the same thing happen with my side skirts

[@EvilStreetShark]

You're Welcome!

[@spookybit3921]

My dad luvs ur vids hes a macanic

[@EvilStreetShark]

Thank You!

[@spookybit3921]

@@EvilStreetSharknp

[@CWardman93]

what are the square hole clips called. whered you get them? i have an 8th gen honda...loving my beast

[@EvilStreetShark]

Honda Parts

[@CWardman93]

@@EvilStreetShark I saw the parts bag you had. Ordered that way. Thank you sir!

[@chrish.5794]

good job on the fenders liners. i've got to say i cringed when you went through the front of the car to place your jack stand. glad to see you use em. be safe.

[@rasgum7]

My Man, where can I find those? All I can find are the cheap really thin ones that are garbage. Thanks for replying.

[@condorhigh2310]

Can I have the links to the full body kit you got?

[@jonwz]

Nice Vid! But doesn't seem to apply to 2008 Civics. No phillip screws on my 2008 lx sedan.

[@odylol12]

Did you get the new liners at Honda cause I need a new one.

[@alanbastida1843]

He said he got after market Bc Honda too flimsy

[@Dannyton69]

Loved your video, wanted to know if by any chance you know where can I buy clips? My fenders are still good but lost some clips and I don't want to wait for it to come to lose and the start rubbing. Been looking around for clips but can't find where to buy. Thank you in advance.

[@osamabinladen786]

Bulls 4Ever autozone

[@markmunar8946]

How long did it take you? Lol it went from light to dark quick

[@nike2126]

What about the SPLASH SHIELD the one in the bottom center of the car ? Or you don’t have it on ?

[@EvilStreetShark]

Dont have it.. That covers the pulley..

[@nike2126]

@@EvilStreetShark is it good to cover the pulley ??

[@EvilStreetShark]

@@nike2126 Yes it is good but debris will still get inside no matter what.. When the car is rolling its away from the pulley

[@nike2126]

EvilStreetShark ohh ok and is it good to have those fender liners put on like you put on ur car ??? Because mine fell off so idk if it’s safe to have it without it or not. Mine is a stock 8th gen

[@nike2126]

EvilStreetShark ??

[@mikeyrov5230]

Bro Ik this is an old vid but do you have the link to buy ? Mine just flew off at 115 mph

[@EvilStreetShark]

I bought mine from my honda dealership

[@mikeyrov5230]

EvilStreetShark damn ok bro, ima check an OEM website I don’t trust eBay or amazon lol, thanks for such a fast response bro !

[@EvilStreetShark]

@@mikeyrov5230 Np

[@mikeyrov5230]

Naif M damn man that sucks , yeah when it happen to me the next day was raining and showing out , I was so scared that my intake was going to such in water with no fender Liner , I just drove slow and it was all good , ordered one online the fit was decent but it till some adjusting to fit nice with the new push clips

[@ooooooooooo144]

How much would the dealer charge to replace only the passenger side

[@dee_2330]

Where did you get those headlights from ?

[@ymp6345]

Wait, I thought the bricks were supposed to go behind the wheels??

[@H2O_garage]

I think the brick should be behind the wheels

[@mrh4610]

Where did you get oem part?

[@rudypj30]

INVEST IN SOME TOOLS!! using scissors 😆

[@EvilStreetShark]

Its plastic lol

[@resevil2396]

Why do you put the bricks in front of the back wheels? Shouldn't they be behind the wheels? Isn't it more likely to roll back?

[@angelina_j]

i believe where he was doing it it goes down at an angle

[@W1LDWESLEY]

Any different for a DX Coupe?

[@brianlopez9482]

Where can I get the fenders ?

[@jeffroth5778]

Nice video thank u helped me put my fendar liner in but I haven’t put the one like u put in the front

[@azproductionco]

how do you air the air up?

[@decoymantiz1958]

Why did you put the bricks in front of the rear tires?🤔

[@EvilStreetShark]

When you jack up the car up on an angle sometimes the whole car will roll and move on you! So you put a brick behind the wheel so if it does decide to roll it wont move!

[@akosial]

EvilStreetShark The bricks need to be wedged on the other side of the wheels so they will prevent the car from rolling back. Thanks for the video!

[@dimitrusvalentin1660]

i know ur the oem god so if u ever come to nj lmk i have a oem from canada acura csx type s center console ill give u

[@EvilStreetShark]

Lmaooo OEM god.. Alright!

[@DennisNedryisStillAlive]

15:19 Policia!!!

[@ichheibeangel]

If you really are going to get new Mugen visors, hit me up I got a new pair. I live in the DMV area.

[@EvilStreetShark]

Will do!!!

[@joshvaldezx]

where did you order your liners?

[@EvilStreetShark]

I bought them from my local honda dealership! OEM fender liners

[@skubasteve1751]

@@EvilStreetShark how much were they bro and where are you located ?

[@turbon3995]

What website did you used?

[@EvilStreetShark]

Went to my local honda dealer

[@Theevil503]

I need new ones lol

[@EvilStreetShark]

hahahaha True!

[@imergomez6052]

Where did you get them OEM

[@EvilStreetShark]

Honda dealership

[@gmartmataro8154]

Hi bro, How much did they charge you for the fenders?

[@EvilStreetShark]

@@gmartmataro8154 I think $40

[@MDTTE]

Where did you buy the clips from?

[@EvilStreetShark]

Honda Dealership

[@W1LDWESLEY]

$10 at O'Reilly's fir a 10 pack

[@JoseJimenez-nz5gr]

Where did you order all pieces of ur car

[@EvilStreetShark]

My local honda dealership

[@ampulsion]

Jesus Christ is your Lord and Savior👑, please take this message seriously and repent of your sins so that you may join the Body of Christ 🕊️✝️. Everyone be blessed and get baptized to be born again if you haven't already 💧💫.

[@tylerjordan9899]

How much were the fender liners?

[@EvilStreetShark]

I believe it was $37.37 each! My honda dealer hooked it up!

[@tylerjordan9899]

EvilStreetShark that’s not bad

[@EvilStreetShark]

Check out my latest video! Secret Reveal! R8TED R! ;) Hopefully it uploads to 1080p or 4k soon!

[@tylerjordan9899]

EvilStreetShark already watched it man👍🏻

[@lrac_1]

I’m soo lazy…lol let me see if can get some to do this for $50

[@BlazeYaDiGG]

Smh I think it’s something up with those cuz I gotta get some too

[@EvilStreetShark]

lol Damn....Fitment was perfect! OEM ftw! No problems with fitment with any of the parts!

[@BlazeYaDiGG]

EvilStreetSharim sayin in general it’s something up with em especially when your cars low as yours. I replaced one on the driver side and I noticed I need the passenger too how much u paid for em?

[@EvilStreetShark]

That is true!!! $37.37 each My dealership hooked me up! Check out my latest video also! Secret Reveal video! ;)

[@BlazeYaDiGG]

EvilStreetShark bouta slide today

[@EvilStreetShark]

????

[@showtaydomo7315]

where you get the carbon fiber hood from?

[@EvilStreetShark]

Industries finest! Talk to guy named Sauer he will help you out!

[@showtaydomo7315]

how much ??

[@Jumpsuit13HEYPEOPLETHISISMYURL]

the bricks are on the wrong side of your rear tires and your jack stands are in the wrong place.

[@TrVlogs82]

Being in the low life seems like a pain. lol

[@EvilStreetShark]

Not at all! Just don't go to low when you lower your car like me.. lol

[@TrVlogs82]

Ah ok.

[@dannyboy768]

I feel like stock height on an 8th gen si is perfect. Anything lower and you have to go too damn slow when you go through dips/speed bumps

[@Transformme.fitness]

Can any one please tel me how can I order for Honda cvic mugen or type R body kit ?

[@dannyboy768]

Tip: 30 sec intros are hella annoying

[@eddierabbit1023]

That wing ugly as fluck though

[@Meangreenzx9r]

It's always funny seeing blacks wearing clothing and speaking English. LOL

[@crucifywolfy8844]

What sockets sizes? Needed

[@rasgum7]

My Man, where can I find those? All I can find are the cheap really thin ones that are garbage. Thanks for replying.

[@jamilettem8978]

Where did you get the covers from?

[@EvilStreetShark]

honda dealership

[@xoxosh4826]

@@EvilStreetShark you walked in & bought the part same day or do they order it for you

[@EvilStreetShark]

@@xoxosh4826 You walk in and pay then they will order it for you

[@Ajaxy]

where did you order the fender liners from

[@EvilStreetShark]

local honda dealership