This method would lead to frustration and even more destruction here in Michigan. But it did point out that you don't have to take the whole damn knuckle off when doing these. Plus, the entertainment value! Hammer on, bro.
@charliebarber14885 жыл бұрын
New ball joint lasted four hours 😲😱😲
@satt46035 жыл бұрын
This guy is ASE certified, Good job keep up the good work 👍
@gorillaxrich5 жыл бұрын
😁!!!
@bingskiddd5 жыл бұрын
Yeah, not very smooth huh? lolololololol
@CFITOMAHAWK22 жыл бұрын
Automobile Sabotage Engineer.
@elgagoloko52392 жыл бұрын
Definitely one of those mechanics who would fix it in minutes but breaks something else in seconds. Nice job though!!! I like it
@ellbot20005 жыл бұрын
Awesome hammer skills!
@nathanhouston10955 жыл бұрын
100$ says the threads on the axle are destroyed, and another 100$ says the plastic housing inside the new ball joint is shattered... Hammer it out, PRESS IT IN.
@rpeter465 жыл бұрын
@@anto427 how many times do you have to keep replacing the same ball joint, though???
@rpeter465 жыл бұрын
@@anto427 If it costs $50 for the press, but you have to keep replacing the ball joint repeatedly, is it worth saving the $50??
@johnembree4765 жыл бұрын
Anto I went back and edited it buddy.Good lookin out.God bless.
@markharris42604 жыл бұрын
Hammering on the threads on the end of the axle is a no no , put the nut back on the axle and don't beat it to death to knock it out , as a few taps with a 20 oz hammer should do it ! Also why beat the hell out of the ball joint putting it in ?? Buyt a press and do it right or grease the ball joint up and use a c-clamp and a deep well socket !
@stevepielacha61565 жыл бұрын
Does one need to be that precise in removal or can I use a bigger hammer?
@LeonardoCostaUSA3 жыл бұрын
Straight from a demolition company to that mechanic shop 😵💫
@RayTrent015 жыл бұрын
Damn, he beat the shit out of that bad boy! Went in like butter lol
@joelafleur64232 жыл бұрын
Just did my 06 liberty lowers, I'm in michigan I'm sure they're original factory. This method would never worked on mine. they needed to be pressed out. They were one with the rust to the knuckles.
@SundryTalesOfConstance79WESTY Жыл бұрын
WOW, when all else fails, brute force prevails...😎 STOC
@MacAutoDiag11 ай бұрын
"I know a guy that'll do it $20"
@jimmiejordan1 Жыл бұрын
Who else got a little squeamish when he hit the bare threads of that CV axle with that hammer?
@thurgogopro5338 Жыл бұрын
Whats the oem part number of that special jeep tool.
@stephenoshaughnessy227910 ай бұрын
One of those rare instances where to a man with a hammer, everything is a nail.
@CFITOMAHAWK22 жыл бұрын
That is the way mexicans install glass windshields too. Yiiihaaaa !!
@LeonardoCostaUSA4 жыл бұрын
This guy should work in a demolition company!!
@sergiosandoval8532 Жыл бұрын
El maestro del martillo
@LewisAraujo3 жыл бұрын
For every hit to the ball joint i felt a kind of hit in my balls! I'm pretty sure it's not a kj of it's own.
@SatanIceCream3 жыл бұрын
good lord.. the balljoint has a nylon socket in it's base... you just smashed it to pieces. Use a press
@tonnywest50254 жыл бұрын
Donde Compraste ese Martillo?
@LeonardoCostaUSA4 жыл бұрын
How to fast destroy all the suspension components and maybe the axle..
@ryanalexander9843 жыл бұрын
And stretch out the brake line and abs sensor with every hit of the hammer.
@Deadbuck733 жыл бұрын
What brand of hammer is that?
@CFITOMAHAWK22 жыл бұрын
Brutus...
@anthonyamaro17715 жыл бұрын
I cringed watching this! A Ball joint press is $50 on Amazon.
@bingskiddd5 жыл бұрын
But a brain is priceless brother...............
@bingskiddd4 жыл бұрын
Scary shit right here...............
@Deadbuck733 жыл бұрын
Isn’t that what it’s called? A hamm..balljoint press...
@dcsears17314 Жыл бұрын
Aren't ya supposed to use a press?
@Airmanmx14 жыл бұрын
That’s only allowed during combat situations like, an army mechanic needs to send a broken vehicle back to take back some grunts back to pew pew
@idessumang73935 жыл бұрын
There goes the thread on the axel😳
@tonisanders69225 жыл бұрын
So I dont have to take the caliper off just beat the spindle off the axel
@zacksanchez83305 жыл бұрын
Yes----but make sure you put axle nut just above flush of spindle so as to not damage it. Don't wanna mushroom it beating it.
@richiebledsoe10063 жыл бұрын
Michal Jackson would be proud
@LewisAraujo3 жыл бұрын
Lol why?
@colteng97215 жыл бұрын
Yeah it may be fast but if I ever saw a mechanic doing this shit to my vehicles I'd take the damn hammer away and throw it out the door. Not the right way to do this whatsoever. Complete hack job and no concern for the parts on the vehicle. Anything this guy touches will probably fail within a few months.
@Alientraveler0035 жыл бұрын
Awesome 👍
@aimembumba53295 жыл бұрын
Really I will never ever give you my car and fix it !!! Please,go back to school 😩
@CFITOMAHAWK22 жыл бұрын
@@aimembumba5329 School?? We need no stinking schools??
@Beeverock4 жыл бұрын
If you need to do this, please watch Chrisfix do it first. This guy had no idea what he’s doing!!!
@dannytrinh073 жыл бұрын
I think this will be his last job at the shop. Bye bye amigo. go home. I'll send you your check in mail. Ridiculous ball joint replacement!
@coachdebruyns2 жыл бұрын
Wtf... Lol 😂 How to break a new ball joint fast.
@unleavenedkaraiteplus34125 жыл бұрын
Hide the hammer from that guy. Really stupid to hit the threaded end of the CV shaft with that hammer.
@theauthentictacoshow4 жыл бұрын
Everything he does was just wrong. I’m sure that new ball joint lasted about a day, and the axle!
@VIOLENTSCHEME5 жыл бұрын
goddamn, bud
@robertjanowski7104 жыл бұрын
Hell now the upper ball joint is worn out.
@sergiosandoval8532 Жыл бұрын
Ya creó q estaba mejor la rotula q traía
@simonguerra39229 ай бұрын
Yo mi carro no lo llevo a ese taller no loco ,me lo devuelven destartalao
@jamesburgin1434 жыл бұрын
How NOT to do it.
@jorgeaguilar15711 ай бұрын
Ok
@-mike--m-96293 жыл бұрын
Shade tree mechanic 😂😆😆😆
@CFITOMAHAWK22 жыл бұрын
ASE Certificated. Automobile Sabotage Engineer.
@FranciscoMartinez-of3gr5 жыл бұрын
you got to be kidding!!!!!!!! hahahahahahaha!!!!!!!!!!!!!
@jorgeibarra83095 жыл бұрын
"fast ball joint replacement"? more like fucked up ball joint replacement,
@sergiosandoval85326 ай бұрын
Yo ahí no me paraba
@sergiosandoval85326 ай бұрын
El ING. Del Marro adelante ya no sirvió, así dejala.
@Papawforreal Жыл бұрын
Painful to watch
@Alientraveler0035 жыл бұрын
Well.. I never :!
@wonksone81153 жыл бұрын
Wtf worst mechanic ever
@robertoprieto-cisneros7413 жыл бұрын
Es una besta de mecanico
@ocampoc8773 жыл бұрын
Do people here expect everyone to do everything the same? Not everyone has tools and money for everything. Shit likes this could happen on the side of the road so y'all need improvise
@CFITOMAHAWK22 жыл бұрын
Dont be stupid. That is not on side of a road.
@ocampoc8772 жыл бұрын
@@CFITOMAHAWK2 wtf you talking about dummy?
@dcsears17314 Жыл бұрын
Side of the road is one thing... and if it is his car, none of our beeswax, right? A ball joint must remain circular and beating it with a hammer surely must cause some deformation.