√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*
@codymyers94802 жыл бұрын
I started working on this project the other day and was absolutely struggling (lack of videos for this make and model). You're video absolutely saved me from giving up! I couldn't fit the ball joint press on, and your recommendation to cut the thread off allowed me to complete the job. Super grateful, and the timing of the upload is impeccable. You rock!
@TRQ2 жыл бұрын
+Cody Myers Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
@shiloh51998 ай бұрын
This was a good demonstration of how to remove the LBJ's on a Jeep Liberty KJ.
@greenbaywacky Жыл бұрын
You filled in the technical things like torque specs for me and procedure. I watched a do it still attached video and my ball joint remover kit wouldnt work and actually tried that way ended up putting back together temporarily. I was thinking on trying again and remove the whole knuckel for the space and cut the threaded part off so i could use the tool and here it is a video that confirmed the way I was thinking. thanks so much for this video i hate to send out and spend my money for things i can do.
@joeydube4202 ай бұрын
considering the tools I did the job with on jack stands I've got some skills. I'm definitely a useful, resourceful human being.
@GJM866 Жыл бұрын
Excellent mechanic and great explanations/camera work! Thank you!!
@thomasshannon96624 ай бұрын
I love this. None of this hardly applies if your working on the ground like most of us. I've also watched videos that don't require taking the knuckle off.
@greenbaywacky Жыл бұрын
Mission done thanks again for the video just saved hundreds doing myself. One thing I would add. the ball joint tool end was kinda slipping off the cut ball joint, could just have been cut slightly angled. I put a small radiator hose clamp around the tool end tightened about half way on the end, made like a small edge and it kept the cut ball joint in place to push the old ball joint out. if that tip helps anyone.
@TRQ Жыл бұрын
+greenbaywacky Thanks for the tip! 1aau.to/m/Shop-TRQ
@stephenoshaughnessy2279 Жыл бұрын
Very good video. Mentioning the foot-pounds is very useful. I'll be repairing my ball joints with TRQ parts.
@tarekmatar78812 ай бұрын
Thank you very very much for this very useful video, i own Jeep liberty 2003 and suffering from this problem actually but am driving slowly until i solve this problem
@andrewps849 ай бұрын
I did everything so far in the removal process but the upper ball joint is spinning to where I can’t get the bolt loose the rest of the way, so I’m going to cut it off carefully. Having an impact wrench is helpful too…not sure I’d want to do this job without it. Also you have the benefit of a lift; I’m working in a muddy, cold yard. P.S. my lower ball joint broke completely off the car.
@desalines27 күн бұрын
My mechanic takes the ball joint to a machine shop to get pressed in. No idea you could do this at home
@wayneellzey Жыл бұрын
Hey man me and my bud are having hell rn. Can only afford to replace ball joint. But front lower on 07 compass has a ring of some sort
@cornellbarnes14655 ай бұрын
Trq,always good info
@ronmcdermott12707 ай бұрын
Very helpful , thank you so much!
@jasb2835 Жыл бұрын
2006 Jeep Liberty has a taper on the axle side that will not allow any thing flat to take it out. Took 4 hours to remove it how the video shows and had to modify tools in order to do it.
@colinandpattyhowie28872 жыл бұрын
Great video. Thank you.
@thesetruths1404 Жыл бұрын
If ya don't want to remove the whole knuckle, how do you do this same procedure?
@justinbalneaves Жыл бұрын
Very useful video thank you 👍
@marianotolentino40902 жыл бұрын
Good video 👍
@therealestrarebreed2 жыл бұрын
And on average what should the labor cost be if I purchase control arm kits myself?
@ctbig75taylor642 ай бұрын
Is a grease gun required?
@desertrat9554 Жыл бұрын
What ball joint press parts are used? there is not 1A Auto parts link to them. Thanks
@petevan7752 Жыл бұрын
what size is the nut on the ball joint?
@jagercowmaster Жыл бұрын
Can you remove lower control arm bushing conected to shock
@elicha123 ай бұрын
can these ball joints be greased when they start to make noise ?
@TRQ3 ай бұрын
+@elicha12 Our ball joints are pre-greased and sealed for a long life and do not require the extra maintenance typically required by greaseable versions.
@luisrivasadorno6734Ай бұрын
I love itttttttt
@johnb69232 жыл бұрын
It doesn't mention taking off the rubber boot from the new ball joint before pressing it in. That should be pointed out, if you look close it's obvious but I ruined the rubber boot pushing it through. Do u sell just the rubber boot?
@g..._anthony272 жыл бұрын
No. You don't take off the rubber.
@joelafleur64232 жыл бұрын
I pressed my thru. It didn't hurt the boot. Maybe yours was on an angle a part during the pressing portion of the job
@prlongdistance Жыл бұрын
Gracia por el video saludos
@davidvenstra50562 жыл бұрын
Wow... That was easy. Now do the driver side with ABS🤣
@gregdodd88949 ай бұрын
Great video hes almost as goo as me
@JoshuaFigueroa90 Жыл бұрын
The castle nut and cotter pin was actually taken off of the tie rod not the ball joint. He put the wrong nut on the tie-rod BUT who cares…. It still works right!? Lol they’ll never know the difference anyway… as long as it’s tight and safe. Lol
@joeydube4202 ай бұрын
why cant anyone ever show us with basic tools on jack stands?
@matthewotis35942 жыл бұрын
Why take the whole thing apart.
@tonystubbs9189 Жыл бұрын
Same reason he bungeed the tie rod out of the way. It make the job easier.
@HaywoodCoBowfishing5 ай бұрын
I think i would of changed that tie rod end it looks like ass