2006 Peugeot 307 1.6L Petrol Clutch Replacement

07376369067
www.williamsmobileclutch.co.uk
Support the Channel Donate:
www.paypal.com/donate?hosted_...

[@Naudir505]

Hey man, you coming or what? "Yes, give me an hour, just gonna replace the clutch". Good job! :-)

[@WMCS]

Raido 😂😁... thanks for visiting the channel.... and for the feedback

[@herbertlumsden3730]

Great video !!! Finally someone shows the get in and get out of the clutch replacement. Good stuff.

[@WMCS]

Herbert Lumsden thanks for the feedback...

[@davidyaniz8935]

Genio. Un aplauso maestro. Espero hagas la traducción. Jaja. Saludos desde Argentina.

[@corradon]

Sei un grande. Senza il tuo video non ci avrei mai provato, e invece ci sono riuscito!! Grazie mille!!!

[@diegomanutencaoautomotiva.]

Excelente trabalho.. Abraço aqui do Brasil. Já vi quase todos seus vídeos..

[@golden695]

This is what I call this guy - AN EXPERT! AMAZING WORKS DUDE..

[@WMCS]

Thanks man. Really appreciate the feedback

[@MechaNick_]

I can see this is not your first time haha... Nice tutorial man! Appreciate it and your way of working!!

[@WMCS]

Niko thanks for the feedback

[@sergpinto1]

You're good, this is a pretty heavy job. good work. The bearing of my clutch also makes noise. I didn't know that so many things had to be taken apart. Congratulations.

[@WMCS]

Pinto S yes they use a thrust bearing. Sometimes they spin. So you may require a guide tube as well.

[@zoyeer1981]

Muchas gracias bro me ayudó bastante

[@skinnyTheCat]

Wonderful to see a mechanic this good! :) Can you do this in a day? My clutch bearing broke today, so i am going to order a kit, and try to do what you did so elegantly! Thank you so much for helping other with this video! i know nothing comes free man! Best! David, Sweden.

[@WMCS]

David Minicz thanks for the feedback mate. This repair took me 4 hours. All the best in your repair

[@damiann4734]

Ifnyou never done this before it will take you 16 hours haha

[@skinnyTheCat]

​@@damiann4734 took me about 8 hours, but that included that I had to quickly mfr a wood cradle for the gearbox (on a jack), due to my back problems, so say 7 hrs. :)

[@damiann4734]

@@skinnyTheCat good stuff. Did you do it all in one day?

[@skinnyTheCat]

👍

[@marels9000]

Excellent video! Thank You very much! 👍👍👍

[@WMCS]

Martti Elsilä Thank you.

[@losawanes3557]

Really great experience

[@Leeho1969]

Good job!

[@alinpatrascu]

I'm impressed! real mechanic

[@WMCS]

Thanks for the review..

[@damiann4734]

You are very quick.

[@julito380]

Genio !!! Saludos desde argentina!

[@WMCS]

Julio Chiappella Saludos.. and thank you. 🙏🏽

[@dotnetdevni]

Its never about how fast a fit is done its about the quality of the job

[@frv6610]

Are you doing this hard work everyday, jeez

[@ofnotandi]

So, it's more or less to break the car into it's atomic elements and reassemble with new clutch. Got it. Appreciate you.

[@WMCS]

That’s it. Breathing new life into it.

[@martymartin2894]

I didn't think it was such a big job take car to pieces.

[@christophermyers4422]

very impressed put a lot - garages to shame.

[@user-ox4eu3xi3s]

@kevin-albert williams - just helped a mate change his clutch in a 207 1.6 hdi, now it seems when tying to go through the gears that 5th will go into it but because nearly imposible to come out of, can wiggle it about and get it back to netural, any ideas?

[@emadalhelfi9082]

Great video. One question. Did you you open the exhaust? Cheers

[@WMCS]

emad alhelfi no. Did not touch the exhaust

[@fatihkskn9375]

It is nice you are master

[@mercar525]

Super. Top. 👍👍👍👍👍

[@heavoc9793]

Nice work man !! You're strong to put back this gearbox in solo At 15:52, why putting grease in the bolt holes of the gearbox please ?

[@bachiryaichi351]

Good ninja

[@pifandrei5743]

Mine slips a bit and biting point went up . Higher revs in high gears. You recon it will hold to drive 7 miles to my mechanic? I've came from town the other day, managed to go home with it .

[@yetrus]

Great job, a very good video, thanks a lot ! How much time it take this operation ?

[@WMCS]

About 4 hrs roughly

[@user-dm8ly7fu2c]

Hi, mine is 2007 Peugeot 307. I recently want to change its clutch. I wonder if this car has a pilot bearing? (Thanks a lot!)

[@songsteven3053]

Good job! Very professional, dude. And what brand of electric wrench? Looks very useful.

[@WMCS]

It’s a Milwaukee fuel ⛽️., 🍻✨✨

[@songsteven3053]

@@WMCS Thanks👍

[@screwsnutsandbolts]

Great job. What weight is that gearbox ?

[@WMCS]

This particular one I’d say is about 50kg.,,

[@screwsnutsandbolts]

@@WMCS You're a brave man ! 👍

[@jpbahmed9]

hi kevin your superb video we are impressed. replace the clutch on a 1.8i Citroën petrol engine disassembly is the same as on the 1.4 petrol peugeot ?

[@WMCS]

jp bahmed there’s a video on a Citroen 1.8 in the channel. Have a look and let me know.

[@jpbahmed9]

@@WMCS thank you Kevin on your channel there is Citroën essence 1.8i ? Kevin it is when you publish the video of the dismantling of the clutch 1.6 hdi for the screw of the box which is in front of the FAP you remember? we talked about that. you are the best really.

[@WMCS]

jp bahmed ahh yess... I remember.. I did one this week. But my go pro has packed up and waiting for a replacement... I have another one on Friday. If you send your email over I’ll take some pics and send it via email. [e-mail]

[@jpbahmed9]

@@WMCS thank you very much Kevin if you can show me in detail how to disassemble this screw which is in front of the FAP. Kevin I wanted to know that I do not find on your chain the disassembly of the clutch on a C4 Picasso 1.8 petrol. Is this the same work on another video in your channel? my mail [e-mail]. I am impressed and by all your videos continue your best

[@volpidav75]

much better than many words! great video. What's the red paste used? thanks

[@WMCS]

Hi Davide.,, it’s red rubber grease. Thanks for supporting the channel.

[@talat03]

👍👍👍👍

[@aaronstrawbridge3033]

What a mission.

[@WMCS]

Not that bad.

[@aaronstrawbridge3033]

I might be buying a 2011 207 so I might have to refer to this video ,great job 👍

[@ualias9906]

Nice video. When you start the engine at the end, there is an annoying whining noise. I have a 307 with the exact same issue - do you know what causes it? EDIT: Aux belt tensioner pulley was worn

[@tonischacher6520]

Got this noise on my 307 from 2003 as well, the pulley broke apart, look for OE 0515.R8, fixed it for me

[@ualias9906]

@@tonischacher6520 Mine turned out to be the aux. belt tensioner pulley

[@bernard6413]

Next time maybe you could show it on my car for your next video!😆😆😆

[@WMCS]

Bernard for sure. 😊

[@canaldoectomorfobarrigudo]

If you pay him kkkk.

[@WMCS]

Canal do Carffonso 😁😂

[@playnotplay1]

Can a gearbox of a 307 2003 car 16v petrol fit without issues on a 307 2006 car 16 petrol please? Thanks a lot and nice vid!

[@WMCS]

Hi Ryan. As long as the gear ratio matches you should be fine.

[@fakyrcmd]

Good job, but doing it alone is a bit tricky. I already did it ...

[@WMCS]

Primeiro Último Good effort mate.

[@kaffebullen]

right shaft may be the problem. Solution: use a wedge and hammer it straight up near by the supportiing bearing.

[@ivanrely1158]

👍👍 !!

[@WMCS]

Ivan Rely thanks. 🥳💫

[@Misbah007]

How much would job like that cost

[@twisted_sista_bmccleanmiss6048]

Hey, random question but would it be easy to tell if my clutch has really been replaced by looking? Is it easy to see? I feel my clutch is no different so I'm suspicious lol

[@WMCS]

The pedal should feel really really soft and smooth. Biting point should be roughly two inches off the floor. Otherwise pull out the slave cylinder and shine a light through the access and see that way if it’s new or not.

[@twisted_sista_bmccleanmiss6048]

@@WMCS ahhhh cheers Kevin m8, much appreciated 😎🙌🏻🙏🏼

[@martymartin2894]

@@WMCS I have same car recently bought the convertible 1.6 petrol. No problem with changing gears but I notice clutch is very easy press and doesn't engage untill pedal is almost fully up. Is it going to go soon do you think.

[@sergpinto1]

Do you know how I can see if the box oil level is ok? Can't find the screw for this in my car?

[@WMCS]

Pinto S what vehicle is it mate.

[@sergpinto1]

@@WMCS hi, Peugeot 307SW 1.4 16V

[@WMCS]

Pinto S it should be on the end of the gearbox. A 24mm nut. Located on the end casing.

[@sergpinto1]

@@WMCS I will look better. My problem is that I don't know where this is to get the box level right. thanks

[@TheSpindelgris]

Do you know if its the same in the 2.0 petrol from 2007?

[@WMCS]

Emil Liden the 207 is a bit easier and more room.

[@alv.3561]

Muy duro estar en la calle

[@WMCS]

MIL Y UN CONSEJOS ok.

[@johnmayberry7669]

Why remove the brake callipers

[@ankidineattoumani7033]

bonjour on ne voit jamais comment vous installer les chandelles merci

[@SehzadeTugra]

Buddy, is this the same as citroen c3 2003 1.6i,

[@WMCS]

Yes ... pretty much down to the gear linkage which has a different attachment

[@SehzadeTugra]

Do you have a video from?

[@johnathancasey3485]

CAN U PLEASE TELL ME HOW TO REMOVE THE DRIVERS SIDE DRIVE SHAFT FROM THE GEARBOX.IM A BIT STUCK.ANY HELP WOULD BE GREAT PEOPLE.THANKS

[@askapenguininja]

Watch at the 3:30 mark, he shows 2 extra bolts that need to come out, I am literally on that part with my car now!!!

[@talat03]

Bonjour Kévin j'ai changé boîte de vitesse et voyant esp allumer qu'est-ce que je peux faire opel zafira b 2007 et merci pour ta réponse et avant d'oublier il faut que je dise ça j'ai dévisser crémaillère

[@WMCS]

talatos03 bonjour.. did you detach the steering column by any chance. Let me know.

[@tonoalcazarlopez6223]

La virgen, tardas menos que yo cambiando los parabrisas !! 😅

[@gregdelasavoie2105]

Nice clip... Peugeot is better than Renault...?!

[@WMCS]

gregos73 I think Peugeot has a better layout in terms of engine bay ... But in terms of wiring issues Renault comes out on top. In my opinion ... the newer Peugeot engine itself has improved a lot and it’s now been widely used from Land Rover, Ford, bmw mini, But so has Renault. A lot of Japanese cars now has Renault engines .. But both of them their downfall is the wiring in my opinion.

[@vinodbhoir7201]

Sir video see and, my 12 year after mechanical work indian car suzuki wagner clutch pleat replace one man( sir kevin great)

[@WMCS]

Vinod Bhoir thanks mate.

[@sams244]

Most of you doing front wheel drive clutch.iwant to see rear wheel propeller shaft connecting gear box

[@WMCS]

Look through the channel. There’s some BMW which might be of interest.

[@sams244]

@@WMCS see you soon.thanks keep it up.

[@adnansgarage]

But he is aggressive like he doesn't care about anything else. He can break anything that can get in his wah. He didnt use torque wrench anywhere. You dont put the lug nuts directly by impact wrench you might destroy the whole hub doing so but he doesn't care

[@MarkWright1963]

Repairmatic Unfortunately he is like 75% of the U.K. car trade. Cowboys.

[@andreipuia7024]

He already broke the pipe that connects into the air filter box. You can see at min 9:14 the pipe was in 1 piece kzbin.info/www/bejne/oZTNh3loapeYhZo and at the end of the video 25:01 it has orange tape :) kzbin.info/www/bejne/oZTNh3loapeYhZo

[@frv6610]

You mean also application of correct newtonmetres?

[@frv6610]

@@andreipuia7024 thats bad if its true

[@BillCarrIpswich]

@@andreipuia7024 I bet the pipe was already cracked.

[@cameroncooper4291]

got one on how to change an auto ....

[@WMCS]

Cameron Cooper only manual gearbox I do mate.

[@colinsteam]

Not as easy as I thought it might be....last one I did years ago was rear wheel drive...much easier.

[@WMCS]

Colin Pendlebury rear wheel drive are definitely more straightforward...a little bit more to take out on front wheel drive. Thanks for the feedback and hope you have a great new year.

[@belmab.3600]

you bent exhaust pipe.