2007 Chevy Silverado 1500 - Replacing Front Brake Pads & Rotors

danthefixitman.org/2007-chevy-...
amzn.to/2L6obdd - Sil-Glyde
amzn.to/30xIrQK - Lisle 26610 T-30 Torx Bit Socket
amzn.to/3lXMuy6 - TEKTON 1/2 Inch Drive Click Torque Wrench (10-150 ft.-lb.) | 24335
Just a quick video showing how to replace the front brake pads and Rotors on a 2007 Chevy Silverado 1500. The pads weren't worn down too far, but there was a groove on one side of the brake rotor.
You will need:
Large Screwdriver/pry bar or a large C - Clamp
3/4" or 19mm socket and/or wrench
18mm socket and / or wrench
T-30 Torx bit
Breaker Bar
Sil Glyde brake grease
Torque the Main Caliper bracket bolts to the spindle to 129 ft. lbs
Torque the caliper installation bolts (that go into the slide pins) to 80 ft. lbs.
Thanks for watching!
Please Subscribe!
-Dan the Fix it Man
Music used by permission:
Black Walnut Productions
Produced & Arranged by: Sam Newbold
tortuga
we've made it this far
Track 15: Stressed
Track 14: Sunrise
samtortuga.bandcamp.com/album...
As an Amazon Associate I earn from qualifying purchases.

[@rudayy6541]

Great video! I love how everything worked out for you.

[@jayvogn2544]

Great video and explanation! Only thing is you should remove, clean and re lube caliper slide pins and also wipe off and wire brush hardware brake pad tabs seating area.

[@BenRockey]

Thanks for this post. Saved me so much time and energy.

[@peerez3146]

Nice video bro

[@israelacm88]

Awesome thanks

[@johnathanwatsonson6009]

I love your video. One thing i have to question. As we all know anywhere that you put grease will attract brake dust like a magnet. Putting it on the back of the pads is something i just do not do. I DO put a little bit around the ring on the actual caliper so the contact points are all the has the grease. everything else is great.

[@owa2533]

Nooo!... my torque wrench only goes to 150 ft pounds..

[@mikehagins1713]

still lots of pad and rotor left.

[@ripkobexnip3719]

Do u needa bleed the breaks for just changing the pads and rotors ?

[@ChrisC13695]

Is this for a classic or reg 1500?

[@DarkMice5529]

What do you mean by “clean up the new rotor with brake clean”? I’m gonna do my brakes for the first time & wanna make sure I do it right! Great vid btw!!

[@Dennis-sq2nm]

He means spray it down with brakleen. Rotors come with an anti rust coating on em u need to clean off

[@DarkMice5529]

That Guy thanks. Where the hell were you 2years ago?! 🤣

[@sterlingdotson3866]

The torque spec is two Ugga duggas

[@CALLtheMECHANICS43]

Where did you find the torque specs online.

[@DantheFixitMan]

I usually just google search and find a forum specific to the vehicle I'm working on. It's not always exact, but usually gets me a good idea of where it should be. Thanks for watching! -Dan the Fix it Man

[@mattheweustis9506]

Brother where is the antie sieze Lol

[@ricardoreyes9979]

⁶