200cc Off Road Shifter Kart Ep 3

[@theobrown1309]

I really love seeing you guys here at rbg and cars and cameras. There are plenty of other tinkerers on youtube but your channels are closer to the reality that most of your viewers are going to experience. You put up serious time and effort to make your projects and videos and I bet lots of people learn as much from you guys as their 12 years of "education"

[@ghetinknotabush8602]

Awesome channel. AWESOME shop/skills you have! THANKS for parts link & discount code! I am in the middle of armchair engineering a 3rd makeover and perhaps final upgrade to a Twister kart frame that has grown over the years with my daughter. It is morphing into a cross-kart. Keep up the work you do!

[@M.TTT.]

Dang, really wanted to see how this thing ran

[@MrGOTJOE]

I love your videos, you and a fellow channel have really got me into these gokarts. I'll be purchasing an offroad gokart hopefully before the end of summer. I'm in Alaska where our summers are only 3 months long. So I'll have all winter to build a sweet gokart. I'll be watching your upgrade engine videos a bunch to help my build. Thanks again guys for all your videos. They're great.

[@MrGOTJOE]

I agree. I work on a hay farm so we don't do hardly anything during the winter months so I'll have endless time to customize the gokart. Then I'll be able to cruise around just about anywhere since our snow levels have been so low over the past 10 years. I'm looking forward to starting the project. Down side to all of it is the FACT that Alaska doesn't have many options for parts gokarts ect. due to shipping. Most companies won't ship to Alaska. So I'm sure I'll have to fabricate most of my parts from scratch. But I'm prepared for it.

[@quietclarence7998]

Tip on installing a chain. Use a ziptie to hold the links together while you put in the master link. Works very well

[@jimrunels8025]

your fabrication is second to none. pretty funny too. I hope you are going to make the go-kart purdy with some paint and what not.

[@RedBeardsGarage]

We will, it looks like death right now lol

[@g-man8008]

The cart is looking great! Keep up the good work Reds! Eventually with enough beating it might break. But don't worry you'll fix it again and it'll still be a kick-ass off-road cart!

[@motobangru3129]

Salute Red Beards Garage With the great performance work Y’all do on your channel

[@michaelangelod5008]

I really like this build I think you're videos are better than carsandcameras and others you deserve way more views and subscribers

[@RedBeardsGarage]

Well we appreciate it man. Thanks for watching and supporting us. We wouldn't be here without the supporters

[@justjackfromsc]

It looks like a good project. Throw a turbo on it. Thanks for the video RB.

[@tahoetom9932]

All I want to do is watch you ride this and man it’s video after video

[@dabbgk]

I’m curious as to why y’all abandoned this build? I’m using the same engine in a go kart and wondering what issues y’all ran into.

[@briansegarra9312]

How well does it run ? Did you needed the jackshaft ? I have that same go kart and plan to install that same engine

[@dustinsmith1806]

when is a continuation video for this I really wanna see the end of the build for something im doing quite similar with close to the same motor

[@tslater1989]

Your chain is hitting the retainer and bolts on the engine side sprocket. I'd recommend a larger sprocket there a much larger one on the jackshaft input side. Keep the one on the output side of the jackshaft and smaller on the axle. More ground clearance, more better. For example, 16-32-16-32

[@RedBeardsGarage]

We will play with the gearing once she is all up and running. I didn't even think about it for ground clearance but that will work perfect. Thanks for looking out man

[@tslater1989]

Red Beard's Garage No problem boss. We have a small fleet of karts in my barn. Starting a dingo XL build soon. Just gotta get the parts around. Might go this route myself. Oh and btw, I have seen it done, but also mounting the brakes on the jackshaft. Which seems iffy to me, but might be worth trying for a vid. Thanks for acknowledging your viewers!

[@musseb_2020]

That straight man the bar

[@mingusbreeze]

Looks like a fun kart. If you don't break it your not having enough fun.

[@tacko834]

That much chain tension on the engine side will cause premature countershaft seal wear. Cool build!

[@bobrider7198]

Sweet build man

[@douglasdailey5998]

Looking pretty good.

[@addicted2fuel]

Looking good can't wait to see it done

[@bcstar4497]

It never gets done🙁

[@kenforehand9667]

I'm pretty sure you're gonna break it.... LoL But that's OK because you've got a welder and can put it together again!

[@mr.braapalicious]

Thinking of using that engine on a kart build too. Was it a yay! Or was it eh nay....? Curious minds wanna know. Thank you!

[@troycrowder9942]

sweet i have been waiting to see this i have had 2 of those motors they rock good for China

[@benamblod2952]

That Hercules reference 😂

[@stephensloan7063]

Still waiting for the continuation of this build. 🤘

[@RedBeardsGarage]

Coming soon. We just get frustrated with some builds and take a break from them lol

[@MrStealth654321]

@@RedBeardsGarage WE ALL WAITING.....

[@lasuzzoeagle1]

@@RedBeardsGarage still waiting. :(

[@Lumbeelegend]

@@MrStealth654321 lol, demanding? I have a Murry Explorer and was wondering what type of motor to use. I was looking at something with a transmission, like a Yamaha R3, Lifan 200cc, yfz450, ect.

[@elesjuan]

Of course yer gonna break it! Thats what happens when you just SEND IT!!!! I'm curious on the gearing of this with the pizza plate sprocket. Bet it'll be fun! Also Friggin WOOT! on the 81k subs! It wasn't *too* long ago when I commented "I can't believe you only have like 4k!" :D

[@lloydpowell8923]

Looks bad ass !!!

[@olthuggie]

"you gonna use a lock washer or somethnin" lol

[@maxxproductions7749]

Need to finish!

[@Alex-cu6uw]

First YES ITS ALMOST READY FOR ANYTHING

[@dallasdelano9147]

Yep

[@NSXTACY420]

Red Beard bros Rule!

[@409streetscene5]

Love the build

[@tylermiller3005]

Dang bro really needed to see how he wired everything😂 sad days

[@SheepHunter9780]

funny..... im in the middle of a build right now, using this exact same engine, in a custom, stick shift, golf cart im building... same idea these guys had, just a different vessel. ID LOVE to see their finished product, but i cant seem to find the next/final video of this build.

[@M.TTT.]

how did yours go?

[@hiyo9144]

0:41 kinda cool how perfect it is

[@jimrunels8025]

I really like the God bless at the end! God is good! We may be in the bible belt here in Tennessee and some think we are back woods and clueless but everyone will bow and confess that Jesus is Lord one day and we will be the smartest people on earth that day! God bless you brother.

[@carlandrews3475]

I would like to see the finishing of this but I cannot find it

[@braddellorin9742]

Where's the continuation of this video? I've been waiting for the next part

[@brianreed9847]

I'm wanting to see it too!!!

[@olivedsc]

Me too!!

[@brianrichman5169]

Just watched the first 3 but no number 4 video.

[@atvabuse5738]

Bradd Ellorin right? Where is the next video. It started when there was a huge gap between the off road go kart and this now in 2020 still no finished go kart?

[@ericksontibayan5084]

Same here..

[@PhilipStrong-ry2bq]

Did you ever finish the bluid

[@RobertPerrigoOkiechopper]

I think it will do the job, after breaking in, it might need a chain tensioner ( spring loaded )

[@danekataylor262]

Kc here good sh#$ that 200cc four stroke on that go-kart

[@junkpile4106]

I think you’re gonna bend that swing arm. They bend on the front side of the axle mount brackets.

[@BigRig003]

You guys should build a rat rod lawn tractor with an old school 2 cylinder flathead. Just an idea

[@Ttchente]

theoutbackbandit hey I did build a rat kart, old yerf dog with engine and tranny, and front suspension of a old 1996 Polaris 425magnum its a monster now I called ratlaris

[@joshgill7072]

Was this ever finished

[@colinpenman8470]

When you going to release episode 4.

[@PunkCoverMoose]

I was looking for like 10 mins!

[@ryderczarnecki7491]

Is that the engine with reverse? And did you guys make a final vid of it ?

[@M.TTT.]

yea has reverse, I wanted to see them run it also - he said they got rid of it

[@M.TTT.]

"carsncameras" did a build with one, "200cc Shifter Kart FIRST RIDE"

[@MrStealth654321]

Where o where is the next clip We all been waiting here so long ..... WHAT HAPPEND YOU ALL GAVE UP ON THIS ONE????????

[@RumbleGarage]

Where's episode 4?

[@garryoliver7105]

Good bro

[@glendoherty-ri8zg]

Sorry if i missed it in the video but what is the gear ratio you went with? Building a 250cc right now and just trying to get a ball park in what to go with

[@arizonajames6131]

Should I save this episode till it was all done. When are you starting 2-stroke Tuesdays?

[@colbytyree2592]

Are you ever going to finish this build I can’t find another video

[@sergiolara2190]

For your next project build a rock crawler go kart

[@baldo6116]

Wat did u guys use to make the mount for engine to go on go kart? Like for the chain and stuff I’m trying to do something like that for my set up also looks clean!

[@saabkingentertainments.k.e]

Why the jackshaft tho why not flip the axle around put the brakes on the other side and run the engine straight to the axle ? Just curious

[@josho134]

Hey, have y'all ever replaced the clutch on this engine? I have the same one brand new but it won't shift into first unless I'm giving it high rpms or am already rolling forward. Would replacing the clutch fix this or is there a different issue that you may know of? It's 6 columns and 7 plates.

[@joshsSidequest]

Part 4 ?? Or did you guys give up

[@metal.mover23]

I want to build a shifter kart after I get done with this mini bike soooo bad…😢😢 how much $$$ y’all gonna have in this one??? Out the door???

[@recklessdiy4501]

Where is ep 4?

[@brutallyhonestmf5578]

Wheres part 4???

[@autumnrogue3675]

Nice

[@jamesburton4795]

Any update on this build ?

[@maxxproductions7749]

No part 4?

[@JuryRigged77]

Do you put chain tighteners on the engine plate to control the slide and angle of the engine?.... just curious

[@cynzhero62]

short but funny!

[@mrmadness8882]

Has your Coleman ct200u giving you any trouble

[@seanbinyamin]

what about the custom revers gear box??

[@eddyle6105]

Next part??? Plis #RedBeardsGarage

[@mu9900]

4:30 shouldnt the lock chain away from engine or it doesnt matter ? ... P.s: as always nice video 😊

[@RedBeardsGarage]

Probably should have lol

[@ferrnanimal]

Wheres ep 4. This is exactly what im doing

[@TheGreatBooger]

do you think that Lifan 200cc would fit on the GoPowerSports frame they offer?

[@sandmanbub]

Whoop!

[@dondehne5370]

I’m no professional but why not eliminate the jack shaft and go directly to the axle? That looks like a horse power robbing design.

[@300zxdriver]

Why run a jack shaft at all ?

[@tracyworthington7540]

Any new videos yet needing help with a rear axle on a little kids go kart

[@justinabts9569]

Hey do you still have that engine plate? I am still trying to finish my build and my plates aren’t working, I’m not good at fabricating yet

[@andbecause5636]

what kind of chain is it off the motor

[@bradr4728]

Check that sproket on the motor some of them bikes are 420p and some are 428p

[@dominickstellato4076]

Brad R the pitch is the same the 428 just has thicker plates

[@briansouth9325]

Needs better music but a great video as always

[@mg.8144]

Where is the final episode of the build

[@Ttchente]

Hey red beard, I need some advices, I did build a rat kart out of a yerf dog, and a 1996Polaris magnum425, have engine, tranny, axle, and front suspension of it, but I do want a wider axel, any suggestions?

[@Baatzn2]

Same

[@nolensimmons]

Awsome

[@motobangru3129]

Y’all needed central air in that garage

[@RedBeardsGarage]

We wish we could afford it but this unit from New Air actually works great in here

[@motobangru3129]

Red Beard's Garage I was juss wondering. That... it’s a good air freshener with the heat,smoke, and the gas odor lol y’all accumulate from working hard on y’alls project . and after y’all rides

[@kingavegarage8722]

Wheres the rest of it???

[@joshuapitts3754]

Making all electric go cart or pocket bike

[@reecebittrick9604]

How did you come up with the name red beard garage

[@richardllaine8267]

U need to dock ur help a days pay lol

[@holtpage8226]

Do we think y’all will break it? If you don’t break it you aren’t riding it right.

[@jimmymcfarland4184]

Danny random question about my Coleman ex. It’s just slower than the other 3 Coleman ct200u. Is the torque converter worth it?

[@kxlucifer]

Jimmy McFarland night and day compare to a clutch.

[@RobertPerrigoOkiechopper]

Is that a #40 chain?

[@RedBeardsGarage]

420

[@BunkerBlog]

You plan on making another video on this kart? I wanted to build something similar.

[@RedBeardsGarage]

Yeah very soon. Some projects I'm not super pumped about so it's hard to start back up on them

[@FordMustangGTRocks]

Why never finish this one?

[@twofortyrida]

What happened with this build?

[@davideuliano]

💪

[@suhardisultan400]

keren brow

[@reecehoyt2621]

Any way you would sell the single seater cart that the 200cc motor was on?

[@RedBeardsGarage]

We are building it for someone at my church very soon. Trading it for a car

[@mealex303]

Nice 1 Rerd berd lol

[@projectinmotion2425]

Wipe that oil off before you ride and expect those brakes to work...

[@calebramsey3796]

I have a problem with my predator 212cc the plastic piece behind the pull start is grinding on the black cover how to fix plz help...