building the YZ85 shifter kart part 3

check out go power sports for all your go kart needs
bit.ly/2sC3WLT
parts I use in this video:
front slick tires
bit.ly/2Jv50sb
rear slick tires
bit.ly/2LBbAhm
seat
bit.ly/2xYsJzy
1 1/4 axle
bit.ly/2HvGaqc
1 1/4 axle bearings
bit.ly/2LxScSe
rear wheel hubs
bit.ly/2xYt4SQ
front wheel hubs
bit.ly/2JEzlaQ
MCP brake caliper
bit.ly/2sIHKQN
master cylinder
bit.ly/2sRKN8B
6" brake disk
bit.ly/2LAiJ1m
1 1/4 brake hub
bit.ly/2JCkhdN
spindles
bit.ly/2sH0396
spindle brackets
bit.ly/2kZFKQc
engine plates
bit.ly/2JrgE7f
Tie rods
bit.ly/2uh76Fq
tie rod ends
bit.ly/2MWc6Y0
steering wheel
bit.ly/2KJF68v
gas pedals
bit.ly/2u3rAlU
Music:
Tobu - Amplified
/ tobuofficial

[@neutraldown6271]

Finally a go kart channel making a decent go kart

[@stevenjohann5435]

Enjoy your videos...actually, I like your honesty, you tend to show more of your thought/fabrication process, and include some mistakes and the fix after...keep it up, great builds

[@MrMedicAdnan]

3:43 is the smile of success... good job!

[@VasilyBuilds]

I suggest painting your projects as insurance. Just a thin layer of clear or flat black to keep rust away. Surface Rust is easy enough to remove with a wire wheel, but it will still take time to remove. My 2 cents Shifter kart looks good!!

[@wheeln24-79]

Yeah I'd go ahead and put something on them as soon as I was done welding the frame. Watching the last video of him finishing the offroad cart I wondered why he didn't go ahead and spray it then instead of having to take it all apart another time and do all that. They makes black primer if that's not the color he wants it to be. I don't see how they're not totally rusted when he gets around to painting them

[@PhillTheVwGuru]

Rust adds patina. And that's cool haha. Rust isnt going to make the cart's stop working sure it'll look pretty but, it's not needed.

[@jerretn99]

Lance Shank he uses galvanized steel so it doesn’t necessarily need paint

[@jarnosaarinen4583]

$100 and it's powder coated, way better than paint!

[@martinvaldovinos5271]

@@jerretn99 You still need to paint the welds

[@plankhill]

Tap a line to your exhaust chamber, 1/4 ish line two or 3 coils, and feed it into your fuel canister if you want to put it down low at the steering wheel. needs to be pressure sealed..I learned this from RC 2 stroke racing days. It builds pressure in the lines, forcing the fuel up like a fuel pump. Called the chicken feeder method... works like a champ... all the racers use it...

[@hewholifts5745]

Ooooh I will be using this!

[@strokerace306]

Looks awesome and fun!! That smile on your face when it stared was priceless!!😎

[@basspro373]

U killing that clutch home boy

[@Kris57277]

9:50 What i have done is making a very small gas tank just above the carb with 3 nippels (in, out and return), and have it constantly being filt up by an electric fuel pump. then you can place a big tank where ever you want. Good luck

[@stirch9]

This is exactly what I was going to suggest. Put the tank and pump on however you want and just feed it to the small tank on top.

[@martinvaldovinos5271]

He just need a T joint as a return line, just install the pump and let the carburator take the amount of fuell that needs and the rest goes back to the tank. that´s how I install that pump in my 1976 datsun 160J

[@ianvaughan9198]

Keep doing what you doing!I like it when you test up the road.Doesnt bore me,so keep it coming and have fun

[@jadonkirk5930]

best build yet since the street bike go cart

[@ellisberry8747]

I love the hand kick start

[@chaselukin4961]

Hello bud

[@ellisberry8747]

Chase Lukin lol hi XD

[@WhiteBoy000]

I really want that shifter cart, I will work on it all the time. I'm going to automotive class in high school

[@ellisberry8747]

Lawrence White what?

[@WhiteBoy000]

Ellis Berry what

[@dirtyhandsu_u1463]

feels like ive bin waiting for years for this vid

[@northernredneck.9187]

This is probably my favorite of you builds and would love to see a small suspension setup on it and some off-road use with it

[@sandylancaster5901]

that cart looks sweeeeeeeeet. great job can't wait to see it finished

[@billdenis7932]

Yes you can use a pulspump. Early 2 cycle personal watercraft had them. Good luck and keep up the good work!

[@Motoman714.]

Damn turn the idle down my guy

[@akdsjgalksdfjg]

haha exactly what i was thinking

[@addicted2fuel245]

Awesome build

[@vnqshZA]

Awesome videos and this kart is just so friggen sick. After I decided to wreck my yz 80, I think this may just be a good way to salvage a perfectly good motor, so thanks for the great build idea, and looking forward to your next vid.

[@T12ZLE]

Awesome series bro 🤙🏾 I wish I was able to do this, living in London really takes away some freedom 😩

[@Lonewolf3165]

Some wheel alignment tips for you and your viewers: If your wheel (top) is leaning inward toward the centerline of the chassis you have negative Camber. If it leans outward it’s Positive Camber. Negative Camber will cause the tire to wear on the inside of the tread area. Positive Camber will cause outside wear. So you may have excessive Negative Camber on the one side. However the pull to the Left is probably caused by something else. Your CASTER angles may be off. Caster won’t cause tire wear but will cause a pull. So here’s how it works: A vehicle will pull to the side with the most Positive CAMBER. It will also pull to the side with the more Negative CASTER. So you could have excessive Negative CAMBER on the left side and either mot enough Positive CASTER on the Left side or too much + CASTER on the Right side. Toe in or out will NOT cause a pull. Just tire wear & erratic steering.

[@es47]

Yes paulse pumps were on snowmobiles and worked great with the mikuni carbs nice work

[@watsonlow22]

Love this i always wanted one might build 1 soon

[@jordenlee1405]

you make it look so easy to built it i hope i will do it in the future

[@aidenyaekel1463]

Your engine is in better shape than my yz 86 all together

[@jakep004]

Great editing and music on this video

[@patrickbuildsalot5348]

Interesting video , just got a my self a 2stoke kart to play with

[@bwdeaton6524]

I've run pulse pumps on two strokes before, only once on a dirt bike motor, but it was fine. used them often on two stroke flathead motors.

[@spicydeath82]

you can add a pulse pump to a two stroke, it's how my old ez go golf cart's two cycle engine's fuel pump works. so it will work, you'll need to tap into the crank case to make it work though. it's where mine is tapped in at.

[@Rossi46Moore]

Most chainsaws and brushcutters work on the pulse pump concept aswell

[@G31mR]

@@Rossi46Moore ...as well as all the old 2-stroke outboard engines.

[@viimmppiii]

most old snowmobiles have pulse pump my polaris indy 400 1988 have one. you only need to make a crank case nippel to feed the pump. =)

[@markyd601]

When they have the tank under the steering wheel they gotta have some type of way to pressurize the system , pulse pump should work , if not a you could use a small fuel pump and some sort of pressure regulator

[@MiguelAngelMG]

a simply hand gear shift next to the steringwheel will help to drive it. Simply as you have to pull or push, like sequential gear changes in rally cars

[@GiffordCalenda-q9j]

Excellent video -- best ever on the "Just Do It Scale" a 10+ out of 10 -- Do you have a source for the tub stock you are using? Please

[@draggonhedd]

Hey I have a little tip for driving with a motorcycle sequential gearbox: Learn to power-shift! Shifting Without the clutch. Pull lightly on the shifter for the next gear, and then just snap off the gas and back on it again, and the shifter should select the next gear with minimal effort. If you are unsure, LOok up some youtube videos for clutchless shifting on youtube. Also do yourself another favor and make the shift lever taller, so its closer to the steering wheel. Also, You can add a pulse pump to a 2 stroke. You get your pulse from the crank case

[@evanhord3038]

I see a new welder!!!

[@KleChii]

what is the name of the welding machine he's using

[@yatesar17]

KleChi His name is Mr. Sparky

[@falconator3419]

Would have loved to have you as a friend when I was much younger lol

[@Gräsklipparmarodören]

Hello, came over from quadricers. you got yourself another sub.

[@fergusonhr]

You are a fabrication GENEOUS

[@skandev6257]

hi, in Russia we have a saying about these" Golden hands" Attaboy! keep it up! like!

[@yousuf86]

awesome mate... Feels like I've succeeded😀😀😀, just watching your first test run.... Cheers....

[@jonathangottschalk7795]

you got a new welder!

[@elesjuan]

I was just thinking to myself in one of his last videos.. As a hobby welder, I'm personally pretty impressed with what Chris has managed to do with his flux core welder and that if he got a slightly nicer welder and some C25, his results would be simply amazing!

[@joshuamorehead6124]

Already saw Quadricers video its a really nice kart

[@msw3456]

I think a fuel pump on a 2-stroke is possible if you do the elecrics in a way so the pump works only if there's no more fuel in the carb. Then the pump refills the carb and if it is full, it shuts off...

[@teamrebuilt5407]

Older 2 stroke jetskis have pulse pumps, might want to check into getting one of those

[@mattymccolgan9453]

And I'll give a tip mate that us riders don't share very much.. use clutch for take off and stopping all other 'UP' shifts can be clutchless as long as you let off the throttle, you can do clutchless down shifts but there is some technique involved.

[@lilhojo123]

You need a larger rear sprocket. Yz 85's have no bottom end and do great with lower gearing. Stock yz85 gearing is 14/47 and that's good for 60 mph. Not sure why you'd choose top speed over acceleration but whatever its your build.

[@chaselukin4961]

Bills BuildAll exactly

[@lilhojo123]

Bills BuildAll but a 20t,22t,24t seems way too small. Not sure what kind of speed he was getting since he never said but problems with acceleration is not ideal.

[@petertrom4397]

This is a great point, but remember the rear wheels he's using are much smaller than a stock YZ85. You lose some gear ratio with larger wheels/tires. I'm very curious to see what his top speed is though.

[@slight_bikelife]

Bills BuildAll as u can see he does need a bigger rear cuz its stalling out alot (in its the clutch too) but as soon as he let out the clutch it stalls

[@abdurrahaman2435]

Brother I like your bike very much

[@nestortapia7094]

good car, thanks for the videos

[@WyattJohnson-h4m]

I’m trying to build one how did you do the wires like the spark and all of it

[@jberry1982]

Yep that motor needs a top end build for certain you kick started by hand is a sign your compression ratio is low and the fact it dies under any load

[@prancstaman]

Every 2 stroke chainsaw and weed wacker has a pulse pump built into the carburetor. I think yours will work, LOL.

[@jordiroca648]

Hi, I want to build a go-kart, but I have a hard time making the plan. Could you tell me which one you used?

[@robertomoers8261]

You have the skills !!!!!!!!

[@davidphillipsjr4264]

How did you do the shift handle and yes you can put a pulse pump on a 2 stroke engine

[@george8966]

I was wondering the same thing haha

[@kosmossanya]

5:33 мазда Трибьют как у меня) Прикольный карт получился

[@michaudboby2260]

Good job !

[@jesse9705]

Where did u get the rad tubbing? Wanting to put a yz80 motor on a 110 quad and need some help

[@chadcole7221]

You can add an impulse pump but you need to tap the crank case ,, check out a snowmobile motor . Dirt bikes fuel systems are gravity fed because the tank is above the carb but most other 2 strokes have a pump or even an impulse carb

[@dirtredemption7608]

Hey what size is the piping

[@villiers1]

Brilliant video, been watching your videos on and off for the last two years. Do you reckon you could do a video on how to make a basic mini bike? Like the Coleman brand ones. We don’t have them over here in the UK and I’d love to make one Cheers - villiers1

[@kaspereskildsen25]

You Can ADD a pulsepump, connect the pulse hose to the connector between the carb and engine :-)

[@ChristianGarcia-in6qj]

do you have the frame draw plans?

[@dirtredemption7608]

I’m trying to build my what size is the tubing

[@mxrider2strokebraaap54]

Amazing build and video! :D

[@jessechase2497]

Where did you get the sprocket on the rear axle?

[@초식-d4q]

Where do you buy racing wheels? Please give me a quick answer!!

[@gilankpradana3200]

Is the best👍👍👍👍👍👍👍👍👍👍👍

[@SINIS0RSA]

How long and wide is this awesome kart?

[@strikerbu]

hi, i was wondering what kind of metal did you use, for the frame

[@DD-rj6fv]

hi!!Im new to this kart hobby!!For a beginner like me, where should i start, mainly with the engine and breaking systems!?

[@Phil2stroke]

Ya you can snow mobiles do have a puls pump ? But if you want to put one on this youl need to dril a hole in the block ☹️ for a fiting and that is skechy! best spot is on the reed cage part of the cylinder after the reeds or it won’t work you can remove the reeds stick a rag in there and drill carefuly! tap it npt and vola!!

[@ThomasKuhn-vm4ri]

Where did you get the clutch cable

[@danieleaster975]

What welder did you use? Flux core?

[@williamdillingham1706]

Yes you can run a pulse pump on a two stroke. I remember a couple of years ago that another man was running one and that day the pump just quit and he or no one else had a pump at the track

[@ELMCEVER]

Todo excelente carnal! Pero no vi a cómo es que instalaste el freno

[@Bowtie41]

Do you know of a good source for specs/recommendations on setting up the caster/camber/ackerman for you carts?

[@davidlux7388]

exhaust pipe pulse pump will work you just have to tweek the inlet size a bit

[@LeanBackTrev]

What are u doing with ur frame now for the 85?

[@No-limits-]

Are you using pipe or tube and what size

[@anthonyf8113]

A vac diaphragm pulse pump would be optimal. They run them on float carbbed 2 stroke snowmobiles so why not.

[@coltonwike8818]

gas tank above hot exhaust?

[@jessevaughan421]

You should take and make a actual shift lever that sticks straight up so you don’t have to keep reaching your hand down to the shifter you have

[@lindad.8412]

Hey I've seen people use pulse pumps with two stock shifter karts on KZbin so you can have the Gas tank mounted below The carburetor but I've also seen the day recommend running t split with the gas lines above the engine so the gas Enters the engine gravity fed still And they use the other part of the t for a return line to the gas tank. So you dont have problems with Flooding the engine

[@mikelid5162]

Good job

[@lucasleandro2718]

Felicidades ! seria muy lindo verlo andar en pista

[@juicy5836]

Wicked awesome 😛

[@amijan27]

you can try the make fuel pump like the rc car work. take a tube out of the exhaust in to fuel tank. and the pressure will push fuel into the engine.

[@asl_j0se]

How long have you done it?

[@ryanfarnay6878]

The engine sounds like it could be lean at least on the idle jet, the slow climb in rpm when it is started is what makes me think this is the case.

[@nyr2747]

How much your front and rear wheel size?

[@bradpaca]

1/8 toe in, if u haven't already. this is what we ran on all are racing karts.

[@jacobdecker3702]

yes you can add a pulse pump that's how it is on 2 stroke snowmobiles

[@russellcupples2170]

How much is your 2 speed transmissions ??

[@thejokerstudio5785]

Of course you can put a pump on a 2 stroke is something mandatory for a racing kart the fuel tank is under the steering usually

[@saidiscreativity2346]

Your follower from Egypt I love you A question, would you please reply to the name of the machine with which the iron was damaged? And how much does it cost? I love this work

[@shlokbhobe9758]

Which is good website to order go karts

[@gaspowerrules]

Vacuum pulse fuel pumps are on 2 stroke golf carts and snowmobiles so I'd say you can

[@hungdang5949]

Bánh xe anh lấy ở đâu vậy, tên gì vậy anh

[@wheeln24-79]

You might not need a fuel pump for that motor. As long as the feed for the carb is at the bottom of the tank these pressure of the fuel might feed it. I think that's how it works and it's the same on all shifter carts. You've got the tank you might as well try it.

[@jessiedixon8288]

Have you thought about putting a bottom on it

[@osamabinladen5936]

You should idle it down some

[@trevorclaar7122]

Osama Bin laden ya

[@2002ZRX1200R]

Sounds like the idle is from a lean condition. Needs carb work for sure.

[@fergusonhr]

Yes you can add a pulse pump...that is how most snowmobile engines feed fuel to there carb...your all good...a pulse pump actually works better on a two stroke