2010 Honda Civic front Brake Pads Replacement

  Рет қаралды 14,456

NoneMechanic101

NoneMechanic101

Күн бұрын

Пікірлер: 63
@cpsullivan69
@cpsullivan69 2 жыл бұрын
Brilliant! Thanks for doing this video..AND doing it RIGHT. I've watched about 6 other videos before this one where people are hanging the calipers by the brake lines, don't (re)grease the sliding pins, etc. THANK YOU for showing the proper way to do this!
@NoneMechanic101
@NoneMechanic101 2 жыл бұрын
You're welcome!
@DIYVariety
@DIYVariety 2 жыл бұрын
Engine mounts suck on that year but got to love them. I see people all the time under a car with just the jack, crazy. A joy as always Hector,
@NoneMechanic101
@NoneMechanic101 2 жыл бұрын
Thank You👍
@OnlineAutoRepairVideos
@OnlineAutoRepairVideos 2 жыл бұрын
Thank goodness for people like you Hector! We just did front & back brakes on a Chevy, and the shop wanted to charge them $450 in just labor!
@NoneMechanic101
@NoneMechanic101 2 жыл бұрын
You won't believe how much I charged for this job. You probably would hit me across my head😀.
@OnlineAutoRepairVideos
@OnlineAutoRepairVideos 2 жыл бұрын
@@NoneMechanic101 LOLOL, how much did you charge Hector?
@NoneMechanic101
@NoneMechanic101 2 жыл бұрын
@@OnlineAutoRepairVideos For this one was 50.00 dollars
@OnlineAutoRepairVideos
@OnlineAutoRepairVideos 2 жыл бұрын
@@NoneMechanic101 That was a little cheap, but not bad at all. We charge $75 so we are very close in our prices.
@NoneMechanic101
@NoneMechanic101 2 жыл бұрын
@@OnlineAutoRepairVideos A lot of people are having a hard time so I do my best to charged a reasonable price.
@john-bl9cm
@john-bl9cm Жыл бұрын
Is it okay to push the fluid back up into the master cylinder
@NoneMechanic101
@NoneMechanic101 Жыл бұрын
When the caliper pistons are pushed in the fluid in the line goes up.
@john-bl9cm
@john-bl9cm Жыл бұрын
yes will that fluid then hurt the master cylinder?
@johnnyboysky2274
@johnnyboysky2274 Жыл бұрын
Do you do all of the brakes first before you do the compression or can you do that same process for every one?
@NoneMechanic101
@NoneMechanic101 Жыл бұрын
I myself do both ways. I do the front brakes and the compressed them. Then I do the rear brakes and then compressed them
@johnnyboysky2274
@johnnyboysky2274 Жыл бұрын
Ty And thanks for replying so quickly i'm in the middle of a job right now thank you
@NoneMechanic101
@NoneMechanic101 Жыл бұрын
@@johnnyboysky2274 👍🏼
@john-bl9cm
@john-bl9cm Жыл бұрын
Great video my man I'm trying to do this for the first time one thing I'm wondering is should I bleed my brake lines?
@NoneMechanic101
@NoneMechanic101 Жыл бұрын
If it was me I would bleed the brake lines.
@AeromaticAero
@AeromaticAero Жыл бұрын
Excellent video my guy. You made it look easy, nothing complex about it!
@NoneMechanic101
@NoneMechanic101 Жыл бұрын
Appreciate it!
@jjmoet1643
@jjmoet1643 2 ай бұрын
My brake bad fell off this morning be cause it was ran down to the bare metal do I need need brake pads or roaters and brake pads
@NoneMechanic101
@NoneMechanic101 2 ай бұрын
@@jjmoet1643 In this situation a would change the brakes and rotors
@Iseekoutthetruth
@Iseekoutthetruth 2 жыл бұрын
I love Honda's, They are easy cars to work on.
@NoneMechanic101
@NoneMechanic101 2 жыл бұрын
Yes they are easy cars to work on. I love working on them
@jheneaduvernay9205
@jheneaduvernay9205 Жыл бұрын
might be a dumb question but at the end when you say you’re gonna press it to make it feel right are you pressing on the brake pedal inside the car?
@jheneaduvernay9205
@jheneaduvernay9205 Жыл бұрын
and do you do that when you’re down with one side or do you do both sides and then do it? First time doing this later tonight and just wondering
@NoneMechanic101
@NoneMechanic101 Жыл бұрын
I myself do it when both brake pads are done.
@pauljosse
@pauljosse 2 жыл бұрын
Some spring clip things came out when I pulled the old pads out? Wtf are these are they important
@NoneMechanic101
@NoneMechanic101 2 жыл бұрын
Which clips. Can you send me a photo to my e mail. Nonemechanic101@Yahoo.com
@pauljosse
@pauljosse 2 жыл бұрын
@@NoneMechanic101 i found them, they go on the back of the pads, i couldnt see what you were doing on my phone screen and took the whole caliper off instead of in 2 bits
@NoneMechanic101
@NoneMechanic101 2 жыл бұрын
@@pauljosse Did you put them back?
@pauljosse
@pauljosse 2 жыл бұрын
@@NoneMechanic101 yeah figured it out
@dominiqueranieri4898
@dominiqueranieri4898 9 ай бұрын
What kind of pads do you recommend? I know ceramic.. but is there a certain brand?
@NoneMechanic101
@NoneMechanic101 9 ай бұрын
IT is a matter of preference. I myself like Akebono brake pads
@qwilliamson9117
@qwilliamson9117 Жыл бұрын
Tools used is always cool
@NoneMechanic101
@NoneMechanic101 Жыл бұрын
👍
@avidshirker8460
@avidshirker8460 2 жыл бұрын
This was a very informative video I appreciate you doing it the way you did
@NoneMechanic101
@NoneMechanic101 2 жыл бұрын
You're so very welcome
@samueladams2649
@samueladams2649 2 жыл бұрын
Now that was one Excellent brake job 👏 👏 👏
@NoneMechanic101
@NoneMechanic101 2 жыл бұрын
Thank you. I appreciate it👍🔧
@johnhynesproductionslimite7522
@johnhynesproductionslimite7522 Жыл бұрын
Calliper went back in kinda tight….bitch of time lining up the bolts on…all went well after
@NoneMechanic101
@NoneMechanic101 Жыл бұрын
👍
@johnhynesproductionslimite7522
@johnhynesproductionslimite7522 Жыл бұрын
Thanks for the video it really helped me out
@NoneMechanic101
@NoneMechanic101 Жыл бұрын
@@johnhynesproductionslimite7522 You’re so very welcome 🙏
@j.salcidog.5027
@j.salcidog.5027 2 жыл бұрын
Very good instructional video.
@NoneMechanic101
@NoneMechanic101 2 жыл бұрын
Thank You👍🔧
@Bob_Chimpman
@Bob_Chimpman 2 жыл бұрын
You can compress the caliper completely with a screwdriver. Just need a large flathead and a little elbow grease. Saves you a step.
@NoneMechanic101
@NoneMechanic101 2 жыл бұрын
Thank you
@iamx-trm6135
@iamx-trm6135 2 жыл бұрын
Helped a lot thank you!!
@NoneMechanic101
@NoneMechanic101 2 жыл бұрын
You're welcome!
@iamjoehill
@iamjoehill 5 ай бұрын
My slide pins just keep rotating!
@NoneMechanic101
@NoneMechanic101 5 ай бұрын
@@iamjoehill It may have a nut that you may have to put a open wrench
@djuni24
@djuni24 4 ай бұрын
@@NoneMechanic101 it should have a nut, its the only part i was missing in your video, verry informative did it before and soon its time again thanks.
@NoneMechanic101
@NoneMechanic101 4 ай бұрын
@@djuni24 👍
@mikemiller859
@mikemiller859 Жыл бұрын
Great job.
@NoneMechanic101
@NoneMechanic101 Жыл бұрын
Thank you. I appreciate it🔧
@cantstopwalkingbutlovemowing
@cantstopwalkingbutlovemowing 2 жыл бұрын
New sub big sons sent me 😄
@NoneMechanic101
@NoneMechanic101 2 жыл бұрын
Thanks for subbing!
@919Babyjoco
@919Babyjoco 5 ай бұрын
💪🏾
@NoneMechanic101
@NoneMechanic101 5 ай бұрын
👍👍
How to Replace Front Brakes 2006-2011 Honda Civic
16:41
How to Replace Brake Pads and Rotors (COMPLETE Guide)
14:21
ChrisFix
Рет қаралды 9 МЛН
UFC 310 : Рахмонов VS Мачадо Гэрри
05:00
Setanta Sports UFC
Рет қаралды 1,2 МЛН
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 4,7 МЛН
Chain Game Strong ⛓️
00:21
Anwar Jibawi
Рет қаралды 41 МЛН
2011 HONDA CIVIC - HOW TO REPLACE FRONT BRAKE PADS - DIY
9:51
Dan the Fix it Man
Рет қаралды 19 М.
2012-2015 Honda Civic Front Brake Pad Replacement DIY
8:49
MrRangerZr1
Рет қаралды 431 М.
How to replace front Brakes and Rotors on 2010 Honda Civic
12:10
RB The Mechanic
Рет қаралды 7 М.
How to Replace Rear Drum Brakes 2006-2011 Honda Civic
15:32
Most Common Brake Installation Mistakes!
13:29
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 4,7 МЛН
How to replace Front brake pads on a 2016 - 2020 Honda Civic
7:10
How To Change Replace Brake Pads Easy Simple
9:55
StatUpBox
Рет қаралды 1,4 МЛН
2010 Honda Civic | P0303 Misfire | Bad Coil Diagnosis & Replacement
23:41
Jimmy's Auto Clinic
Рет қаралды 1,4 М.
How to Replace Front Brakes, Pads and Rotors
8:30
ChrisFix
Рет қаралды 3,3 МЛН