2011-2014 Ford F-150 Side View Mirror Replacement: Easy Removal & Installation | ReveMoto

[@ReveMoto]

Thank you for watching our video, we are here to help! Get your F150 mirror below. 2011-2014 Ford F150 Side View Mirror Replacement If you need any other high quality painted auto part or need to chat with us : www.revemoto.com

[@michaellavalle8270]

Thank you! Turned what I thought was a pain in the ass thing into something easy and simple.

[@ReveMoto]

Appreciate it! Subscribe to us as we're always adding more videos to help you DIY.

[@douglaskay7523]

That was by far the best instructional video I’ve ever used. Next time talk about the socket sizes you’re using. I faintly heard her mention them. Great vid. Top shelf

[@ReveMoto]

Appreciate it! Subscribe to us as we're always adding more videos to help you DIY!

[@megancomar]

Just replaced the same driver side mirror on my 2012 f150. You called the sizes for the bolts I needed to remove and showed where they were. Did it in a half hour. Awesome video! Thanks a bunch!

[@ReveMoto]

Glad to hear it. Thank you!

[@jackcoddington5524]

Perfect! Others had me taking out the window and door controls. I was finished in 20 minutes. Thanks

[@ReveMoto]

Glad it helped!

[@AndrewPeifer-kt5qj]

Just did this right now, about 30ish minutes start to finish, no problems at all. Video was immensely helpful and well done, thank you.

[@ReveMoto]

Glad it helped!

[@jeffa8504]

Excellent instruction. I knocked this out in 20 minutes this morning after watching this video. Thank you.

[@ReveMoto]

Glad it helped! Thank you for watching.

[@markanthonythompson3181]

Thanks replacing mine today !

[@ReveMoto]

Nice! Let me know how it goes!

[@SouthernFamilyandFirearms]

Just used this to replace my son's mirror - thanks

[@ReveMoto]

Appreciate it! Check out more of our videos for more helpful DIY content.

[@miltoncounciljr4195]

Thank you had to replace my driver side mirror on my 2013 Ford F-150. After watching your video it wound up working out just the way you showed it. Thank you.

[@ReveMoto]

We're glad to hear it! Please subscribe, it helps us a lot. 😀

[@travissmith2042]

I loved this. I watched the video a couple of times and did exactly what was shown in the video. My new mirror is on and working perfectly.

[@ReveMoto]

Awesome, we love to hear it! Please subscribe, it helps out a ton 😀

[@mikeaboussie1288]

Thx so much, Ford wants $390 ,for mirror, Found on Amazon $125 same as mine, your video was on cue 😀 Appreciate the help

[@ReveMoto]

Excellent! We're glad we could help. Please subscribe, it helps out a lot 😀

[@mrbumblehill4596]

Thanks, made it a no brainer. Helps as you get older.

[@ReveMoto]

Haha true that old age comes with knowledge! Thank you for watching go to www.ReveMoto.com. If you need any car parts

[@reelcs]

DIY - this video was concise and comprehensive. I replace passenger side mirror on F150/2014 within 20 mins max. Thanks to your video! Keep up good work!

[@ReveMoto]

You're welcome!

[@peacefullife7520]

Thanks. I saved a lot of money

[@cyllakjaw]

Thank you. I will be doing this in a few days. This will save me so much downtime and money.

[@ReveMoto]

That's why we make these videos. Thank you for watching!

[@armandomolina2451]

I just went to your website for painted body parts, will be using in the future.

[@ReveMoto]

Armando thank you so much for the support. We literally just did a website make over to make it more user friendly. Give us any feedback to help us improve

[@EagerMeek]

Thank you. I called my local dealership and they quoted me close to $700 for this job. It took me 45 minutes, and paid a little less than $100 bucks for a pair of after-market mirrors. They don’t call em stealerships for no reason.

[@ReveMoto]

That's part of the reason we make these videos. A mirror install is probably one of the simplest jobs you can do. We're glad over video helped you!

[@caterinaplatt9811]

I'm relieved to know these vehicles use real bolts and not those plastic nasties found in lesser vehicles.

[@ReveMoto]

Oh man so you have seen those ridiculous plastic ones!! I feel you on that. If you need parts for your car go to www.ReveMoto.com

[@worksmarter6418]

Thanks a lot. Took me about an hour, but I had a lot of trouble getting the door panel back on. one of the 11mm nuts was also stripped so I had to use an adjustable wrench.

[@ReveMoto]

You're welcome! Thanks for watching and telling us about the issue you had. We'll definitely keep this in mind to see how we can show getting the door panel back on easier next time. Have a Happy New Year!

[@tahoe24x7]

Excellent - just replaced my mirror in under an hour. Thanks very much!

[@ReveMoto]

Thank you! We're glad that our videos are helping folks out there.

[@oby-1607]

My mirror hardly heats anymore when it fogs up and some of the leds don't work when turning so this video helps.

[@ReveMoto]

We're glad our video is helpful. Thanks for watching!

[@alaninnh]

About to do this on my truck. This video is a big help.

[@ReveMoto]

Awesome, glad we can help! It's a pretty straightforward DIY job.

[@thejourney9502]

awesome video, i know its a few years old but so is my truck. Thanks!!!

[@ReveMoto]

Glad it helped. This is a solid truck, so hopefully it last for many more years.

[@stevehenry9053]

Thank you!!!

[@ReveMoto]

For sure! Thanks for checking out our video. If you need any prepainted mirrors, please keep us in mind! 👍

[@royjimenez6789]

Thank you to show people how to change a mirror it did help me a lot i did change mine today from passanger side 👍👍👍👍👍👍👍😎

[@ReveMoto]

Glad it helped! Thank you for watching.

[@royjimenez6789]

@@ReveMoto You're welcome 👍👍👍👍😎

[@atilathesonofdanubius4277]

Great video, exactly what I was looking for.

[@ReveMoto]

We love to hear it. Thank you for watching!

[@johnsullivan8712]

I must do this and am not a gear head, I am not patient enough for it. This helps a million. Thanks.

[@ReveMoto]

Thank you for the reply. This is why we make these videos. We're glad it is helpful.

[@donnacoulter3858]

Thank you SO MUCH for the help! You guys (& gal:) made the video so easy to follow! I love being able to work on my own truck when i can & the mirror was a first for me - thanks again!!

[@ReveMoto]

You are so welcome!

[@matthewjohnson2495]

I’m pretty sure I would have broke something trying to get it apart but after watching this I had the exact tool sizes needed and within 20 minutes I was done 👍🏼

[@ReveMoto]

Thank you for the comment, we're glad we could help!

[@bartswarm869]

Thank you for the video! Very helpful.

[@ReveMoto]

You're welcome!

[@reelcs]

Hds up - the threaded insert that holds the screw behind the interior door handle can slip off and fall into door panel … if it does pull window up and reach in bottom of door panel carefully and feel around bottom of door find insert pull it out.

[@ReveMoto]

Great tip because I think this happened to us twice!

[@petermilburn2427]

Excellent Video My only suggestion is to check functionality prior to putting the panel back on. Easier to fix

[@ReveMoto]

Thank you for watching and that is a great tip!

[@johnwalker7196]

Excellent video.

[@ReveMoto]

Thank you very much!

[@ADarkKnight1]

This really helped me! Thanks!

[@ReveMoto]

Glad it helped!

[@bryanremillard6207]

Awesome video. Thanks. Just saved me some dough

[@ReveMoto]

Great to hear!

[@jgrigsby201183]

This worked perfectly! Thank you!

[@ReveMoto]

Glad it helped!

[@armandomolina2451]

Thanks you're great help.

[@ReveMoto]

You're very welcome!!

[@darrinschlangen4119]

Thank you for the helpful video! I just did this job!

[@ReveMoto]

Glad it helped!

[@derrikhassemer5365]

Love the sound track

[@ReveMoto]

Thanks! You have the best ears to hear it.

[@SCRooster9]

Great Help, Thanks

[@ReveMoto]

You're welcome and thank you for watching!

[@apoloniofalcon1629]

Tanks! Good advice!

[@ReveMoto]

Glad it was helpful!

[@chriscromwell1682]

Nice. Thanks. Very helpful, clear and we'll done.

[@ReveMoto]

We're glad we can help, thank you!

[@1richtrump]

Your process video was quick, short, to the point and... Spot. On. Thanks much!

[@ReveMoto]

Thank you! We're glad that we could be of help.

[@BR-cb4yd]

Awesome video!!

[@VtooSmooth]

Is this the same if you have power folding mirrors ? My mirrors look exactly the same as the one replaced except passenger side doesnt have the smaller squared off section on the mirror

[@xj4m35x2]

Thanks

[@ReveMoto]

No problem, thank you for watching!

[@floydguel4238]

Cool thanks man!!

[@ReveMoto]

😀 We're glad we can be of help!

[@thomasparker5944]

Thank you

[@ReveMoto]

You're welcome & thanks for watching!

[@reubenvanbeek1226]

Is this the same installation as the dual arm mirrors for the same model?

[@ReveMoto]

I am not 100% sure but it should be very similar.

[@noxjester890]

Since you're a BMW owner there is a lever on the left hand side of the steering wheel that if you move it the vehicle will indicate to other drivers if you are intending to change lanes

[@ReveMoto]

Hello! We're a little confused but yes, using the turn signal is best for everyone. Also, there are no BMW owners here. Take care!

[@joe1071]

When I did mine, instead of hanging the door panel by the wires, just keep the bottom clips in so the door rests on those, and there is still enough room up top to take the mirror out

[@ReveMoto]

Great suggestion! Thank you for watching.

[@waynequick2229]

Installation of passenger side mirror

[@ReveMoto]

We haven't done the passenger-side mirror but it should be the same process as the left-side. Thank you for watching!

[@isaacyoung1868]

appreciate the video.. did you disconnect the battery before doing this work or did you feel safe that nothing bad would happen electrically?

[@ReveMoto]

Hello Isaac and thank you for watching! We did not disconnect the battery but that is the safest thing to do. All the mechanics and electrical components are run through one plug, so we felt that nothing would happen. Cheers!

[@Liftmaster-sw2zy]

I have a question. I have a 2012 Ford F-150 XLT. My question is, can I replace my side mirror with ones with the turn signal in them, if my current ones don’t have the turn signal lights. Mine are powered, I’m just wondering if that’s possible or not. Thanks

[@ReveMoto]

Hello! Yes and no. We recommend that you stick with the correct mirror with correct features. There are electric pins set aside fore each feature and if you install a mirror with or without the correct feature may effect the function of your mirror. Good luck!

[@metaltera86]

Let me know what you did/do. I have a 2011 xlt without the bulbs but power adjusting and was wondering if I could swap it out one just like the video.

[@michaelcadigan7797]

Looking to do this for my 2011 f150. I ordered new sequential turn signals and wanted to install them. Is this OEM size? Do you think they will fit?

[@ReveMoto]

Hello and that sounds cool! We're not able to see the lights but we're sure they'll fit. Make sure to test it all out before you completely install it. Take care!

[@ReachLaylo]

Hello, I swapped my mirror due to mine being hit off. It’s in on and fine, I just now seem to have some kind of air leakage while I driver at a higher rate of speed. Any recommendations? Thanks in advance

[@ReveMoto]

Hello. Our side view mirrors and all mirrors will come with a rubber or foam insulation. Your old OEM mirror would also have it on the base of the mirror. You can buy it at the dealership if you don't have one. It can cover the entire base or just cover the edges. Good luck!

[@Vonbechtle]

What was the bolt size at bottom I wanna buy new ones

[@ReveMoto]

Hello. It's been so long I honestly do not remember. I want to say they were 8mm but American cars have funny sizes, could of been 7-9mm bolt. It should be a couple bucks at the dealer. Good luck.

[@futuretv8686]

Was that a 22 pin or an 8 pin. I’m trying to figure what mine is. I have a 2013 f150 Lariat.

[@ReveMoto]

It was the higher end mirror with memory and turn signal. The best thing to do is call the dealership and ask them using your VIN. They will tell you they can't sometimes but its a lie, they can give you the part number for the mirror and with that you can google the mirror with the correct features. You can also call us if you need help to find a mirror, we sell them! Thank you for watching.

[@robbieeades1956]

What size sockets did you use?

[@ReveMoto]

Hi Robbie so if I remember correctly it’s a 8mm for the door panel to be removed and then the actually bolts on the side view mirror is 11mm. Let me know if you have any issues.

[@NeedsMoreToys]

Your website site has none of these year mirrors listed. Ugh.

[@ReveMoto]

Hello and sorry about that. Ford parts can be hard to find, especially if they are new. We do our best to update for newer parts. Please follow the link below and our sales staff can get you a quote. www.revemoto.com/pages/painted-parts-request

[@woodyandtwinkie]

I have a 2012, only power mirror (that i know of) no led lights, just power movement. would anyone know if i’d buy aftermarket mirrors if the leds would work?

[@ReveMoto]

The Led may not work as the wire harness is different if you don’t already have led on your mirrors. You may have to get an electrician to figure out how to change it out. If you need parts for your car go to www.ReveMoto.com

[@papakibs]

Thanks for the video, but you didn’t show how to replace skull cap.

[@ReveMoto]

Hello Kevin. That is correct. We sell the full assembly aftermarket and rarely any caps. The caps are usually OEM but to replace that you would need a thin panel clip remover to pop off the cap. It may or may not have screws on the back. We just haven't replaced the cap on this before. Thanks for watching and good luck!

[@rhdk9]

just ordered on amazon should be ok …..09 fx4

[@ReveMoto]

Hello and yeah, you should be good. Just make sure the feature work before you secure the door panel. Thank for watching!

[@jamiephillips3947]

I did the same thing forgot about the tabs at the bottom had to unbolt and put them in

[@ReveMoto]

Hard lessons are the best ones. We had a good laugh at the expense of our installer.

[@412psekustomzllc7]

Am I crazy, I thought you would have showed how to remove & replace the broken "mirror"?

[@ReveMoto]

You're not crazy, the broken mirror is referred to as "glass" in the parts world. But you can just pop the glass off with panel clip removal tools. The glass is only held on by plastic clips but be careful not to pull the glass too much, there may be wires from the motor to the glass for heat features. Good luck!

[@northofseven4233]

Wrong mirror went back on but whatever as long as the owner is happy

[@ReveMoto]

The customer did not want the correct mirror because the price was much higher. He opted for the less expensive mirror without a feature he needed. I don't recall the feature, it was a while ago.

[@IAW888]

How to replace just the mirror? Not the plastic.

[@ReveMoto]

You can pull the glass off gently. It's only held on by plastic clips. Don't pull to hard because there may be electrical connection to the glass.

[@IAW888]

@@ReveMoto I did it. Thanks!

[@ReveMoto]

@@IAW888 Nice 😀

[@wwebtime]

Why do I still see guys fooling around with a ratchet on this type of thing. I have a screw gun/cordless drill with sockets and extensions and zap that stuff a part in seconds, then shoot it back together the same way.... must just be me I reckon.

[@ReveMoto]

You're absolutely correct. We just use the most basic tools because that's what our guy prefers. We have used a drill for other videos and it's much easier and faster. Thanks for watching!

[@woolval52]

So the actual mirror can’t just pop off and be replaced? You must replace the entire mirror assembly? Man, that sucks!!

[@ReveMoto]

Aftermarket mirrors come as a full assembly. Most side view mirrors have replaceable glass (mirror) but they're only available from the dealer. There are some rare models that are sold together but you could probably get JUST the glass from Ford. Thanks for watching!

[@MarkLothson]

your video didn't actually tell us what size bolts were at the bottom, middle and top. Not very instructional compared to other videos showing the same thing.

[@BraandenRettie]

He did at the beginning 8mm

[@jean-guyduguay43]

en baissant ta vitre le travail est plus sure.

[@ReveMoto]

Oui, si la fenêtre était fermée, le travail aurait pu être un peu plus facile. I used Google Translate, J'espère que la traduction n'est pas trop mauvaise.

[@jean-guyduguay43]

oui la traduction est excellente comme votre video ,le travail est fait de facon professionnelle et rapide car vous n,avezl pas enlever le panneau au complet ni la poignée comme dans certaine video fait par des amateurs incompétents.Encore bravo!

[@ReveMoto]

@@jean-guyduguay43 Merci beaucoup

[@robnation2475]

eBay for F150 mirror parts 2009-2014, 2015-2020

[@ReveMoto]

Hi there, sorry not sure what you're asking here. We do sell the F150 mirrors on our site at www.revemoto.com, and we paint them in-house. Happy to answer any other questions you might have.

[@mortimerq-pencil2513]

Thanks for this video. It’s very helpful.

[@ReveMoto]

Glad to hear that! Please subscribe, it really helps us out to make more videos for folks!

[@langkhach237]

Great advice

[@ReveMoto]

Thank you for watching!

[@EagerMeek]

Thank you.

[@ReveMoto]

You are very welcome!

[@Tyler-gu8fd]

Thank you

[@ReveMoto]

You're welcome