2014-2019 Lexus GX460 FACE LIFT to 2020 model

Decided to do a facelift by removing the front grill off my 2017 Lexus GX460 and installing a 2020 front grill. For the most part, its plug and play. No major modifications involved except for the Lexus logo emblem (some plastic trimming involved).
New Update: Your 2020 new grille is see-thru. If you have a white crossbeam behind your grille as i do, i would paint it black.
Cost of everything to do the facelift.
Top Grille #5310160G30 = $542.38,
Bottom Grille #5311260340 = $139.93.
YOU NEED BOTH GRILLES TOP AND BOTTOM.
Lexus Emblem = Use your old one from 2016 with my other video.
I bought both top and bottom grille at Bell Lexus in Scottsdale, Arizona because of No Tax and Free Shipping promotion going on till the end of August 2020. I did not purchase an emblem because the cost was upwards of $300 for an OEM 2020 Lexus (which is ridiculous).

[@johncyboron591]

First, Thanks Bob. I completed the "facelift" on my 2015 GX this weekend. Couple notes for people who have front parking sensors and headlight washers. For the headlight washers, there is a main line in passenger side wheel well that splits to each headlight washer. Just clamp off the mainline and detach the connector before the split. The connector is easy to clip off and reattach. Worst case if you don't clamp off the line, all your fluid will pour out so not a huge deal. The parking sensors pose a problem however, the pre-2020 sensors will not fit into the newer grill "perfectly. So I had to "modify" mine and zip tie them in place on the new grill (purely cosmetic and cannot be seen once the grill is reinstalled). Just wanted to give you folks with parking sensors a heads-up that the new grill will not be 100% "plug and play" and will take a little jerry-rigging. That said, my project took me 3 hours from start to finish and that includes the time to dremel out the plastic for the old emblem to fit into the new grill.

[@GXBOB]

Excellent ! Thanks for sharing. I was wondering when someone would provide some input for this the sensors. Again, thanks!

[@kraigschenewerk4430]

Thx for sharing. do you have any pictures of the sensor fitment issues and customizations you made?

[@GXBOB]

@@kraigschenewerk4430 i had no issues since my model didn’t have front sensors. Read some of the comments , some folks had to do some customizations

[@miltondejesus2076]

I just completed mine last night- took advantage of Lexus Bellsouth Labor Day sale and no sales tax! I figured out the trick for the parking sensors- if you cut the tops of the heat glued bracket it will come off and you can use your old bracket to hold on the parking sensors. The front camera however was a pain and took the greatest amount of time to fit. For my 2018 gx, there is a support bracket that is left exposed, so I either have to paint that black or cut off the locking plate from my old grill and use it on the support bracket to cover the bar ( mine is white). Now that I know how to remove the grill, it will be easy to go back and fix…. Then there is the license- I hate covering any part of the grill… maybe I will attach it to the lower bumper 🤷🏽‍♂️

[@GXBOB]

@@miltondejesus2076 nice! Did you take a look at my license plate installation mod video?

[@gipstetz6720]

The best Gx460 channel yet. Thanks for posting.

[@GXBOB]

Thanks Gipstetz!

[@tntfortunes]

Thanks Bob! I replaced the grille on my 2014 after seeing your video. The truck looks like a different truck! Your tutorial was very helpful, thanks for sharing!

[@GXBOB]

Anytime tntfortunes!

[@herodtrt5576]

Thanks Bob! I just finished mine. Mine is 2018 premium with headlight washer and sensors. It was challenging but below comments were very helpful! Thanks again.

[@GXBOB]

Thanks for the input! 😎👍

[@olivel9080]

Great video. I ordered an aftermarket gloss black one piece grill. It went it easily in a few hours and even accommodated the 2018 grill emblem with no mods. Thank Bob

[@stevenbayless210]

You got a link for the one you went with?

[@mweidner311]

Bob you're the man! Even posted the Lexus part numbers, thank you! I'd rather buy genuine Lexus parts as well after looking at all the aftermarket selection.

[@GXBOB]

Bare in mind, your model may have sensors you'll have to take off and customize onto your new grille. Best of luck to ya.

[@crassmf1745]

Appreciate the video. Exactly what I was looking for. Got 15 6 month ago and happy with the purchase so far. Exited to give gx a new look of 2020. Got new sub

[@GXBOB]

becareful as there are several versions of these headlamps that give error codes. Make sure you buy one that state "error free". Or else you are in a world of headaches.

[@crassmf1745]

@@GXBOB appreciate heads up. Cheers

[@threesetstofailure9941]

Looking at each of your videos I think I will do the emblem before the grill install to make access easier. Thanks for posting this info

[@GXBOB]

That's a great idea!

[@md8744]

Wow wow 👍

[@colinrogers954]

Bob, you're a God! I had been wondering for awhile if this conversion was possible, all I had to do was google it and find you. I ordered by parts from Bell Lexus even though I live in South Florida and will be installing them next weekend. I am looking forward to the new look.

[@GXBOB]

Sweeet! If your truck came with parking sensors or headlight washers, common sense and some mechanical aptitude will get you thru it. I also have a video on how to install your old lexus emblem onto your new grille. kzbin.info/www/bejne/p3y8oIl3Zbqrj9E

[@art2lyd12]

Well pulled the trigger on a new grill assembly. Good deals from Bell Lexus in Scottsdale, AZ. So, I will be following this video when it gets here.

[@GXBOB]

That’s awesome! Hope you did the free shipping code. Here’s a good link to read before you start your install. www.clublexus.com/forums/gx-2nd-gen-2010-present/937611-2020-gx-front-grill-on-2014-2019-a-22.html

[@art2lyd12]

@@GXBOB Thanks for the like. My 2018 is the luxury level and has two front sensors. The link provided good info with pictures on how to install the sensors from a 2018 to the new 2020 grill.

[@DjEricP11]

Thanks Bob, made the installation easy AF! I almost forgot the hood seal until I saw your other video. LOL There's not trimming needed for the emblem if you buy an aftermarket grille. Also I painted the cross piece black so you don't see it through the grille.

[@GXBOB]

Lots of lessons learned for sure. 👍

[@mikelawson8012]

Got this one done today on my 2015 using OEM 2020 grill from Lexus dealer. The grill itself fits good into the bumper surround. The parking sensors took the most time to alter and fit using super glue to ensure they didn't move. I recommend cutting out the emblem slot and attaching the emblem onto the grill prior to reattaching the bumper to the GX460 (its just easier). Took me about 2 hours to complete mostly due to the alterations I had to make on the sensors. but it came out great.

[@jonathantuchez6376]

Hey! I’m doing this to my 15’ Gx next week. I have parking sensors. What all did you have to alter/mod with the sensors? What did you do with the headlight washers?

[@Kiss__Kiss]

Man!!! You weren't kidding!! Way to go BOB!!!!

[@GXBOB]

Thanks Kiss Kiss! Next up on the list of things to do are led interior/exterior lights. Not sure what else i could do this car that I haven't already done on the previous rides....)=

[@rutgershouses]

I love all your videos bob! There is no way anyone can mess up any installations the way you explain it, out of all your videos the only thing I purchased for my Gx so for was the secondary air filter but I haven’t install it yet

[@GXBOB]

What are you waiting for!!! The fun part is the installation

[@rutgershouses]

@@GXBOB I know but I only had the vehicle for 2 months you think I should do it so soon? It’s a 2022 GX 460

[@rutgershouses]

@@GXBOB oh I also ordered and returned the weathertech rain guard I should have listened to you and shouldn’t have order it the driver side window wouldn’t close it went up and went back down again and I had to hold the button and wiggle the guard for it to close stressing out the motor, so I returned it

[@rutgershouses]

@@GXBOB I only see 2 no name brand stick on rain guards out there I like the one you installed on your GX but when I added it to the cart on Amazon it states it doesn’t fit the GX 2022 so I still don’t have rain guards on my Gx 460

[@GXBOB]

@@rutgershouses That's too bad. Well i can confirm that a lot of products on Amazon will state it won't fit the 2022 because the mfg or supplier did not update their websites fitment charts and thats why it states that on Amazon. You also have to understand a lot of these distributors know nothing about our vehicles. I would go ahead and order it on Amazon and do the physical fit up yourself. Its plastic and can be dremeled very easily. The bonus part is that Amazon's return policy is second to none. Go for it.

[@LOLAtheDESTROYER]

Almost ordered from Dubai! Going to check my dealer first. Thanks for the detailed video!

[@GXBOB]

Any time man ! Bell Lexus in Arizona was doing some special with free shipping with a discount code. Other viewers mentioned a lower price after i bought mine so check around. I just know that Bell has been selling on amazon for cheaper than other Lexus dealers.

[@gohenrygomez]

How much was it?

[@RD-vv6kk]

I have a 2021 with a damaged lower grille section. Used this video to replace the part. Thanks.

[@GXBOB]

Thank you for watching RD. 💪

[@art2lyd12]

Mr. GX$Bob, well finally did the grill change from my 2018. Came out excellent. Only issue I had was modify the from sensor installation. Little Dremel, little silicone glue and a black wire tie. Looks great. I also noticed that I have water noses running to an area that is blanked off which is for the headlight washer that come some versions. I had to pinch off the main line in. No biggie. Since I save about $100 from Bell Lexus, I went ahead and purchased to newer Lexus emblem. Planning on selling the old grill and emblem to recoup some monies. If i had your email I would send you a before and after picture. By the way, I have told a few folks about your videos especially about the face lift one. Thanks again. Next mod is blinker LEDs and running boards LED’s. Keep it up.

[@GXBOB]

Hey Art, great going! All of this stuff only looks intimidating till u start tearing it apart. The led's are probably the easiest of all the mods.

[@art2lyd12]

@@GXBOB, interior LEDs, piece of cake. Installed those LED blinker lights, K&N filters. Next mod, that has pedal mod. Moving right along.

[@HaiLe-zl2xd]

Thanks for video & I already done & install fog lights & LED light at grille & switch turn on/off for LED light

[@GXBOB]

Nice!!!

[@gous5649]

Wow! Great video. Thanks for sharing. The GX is looking awesome 👌

[@GXBOB]

thanks Dave. This is a fairly old video. A lot of lessons learned needs to be updated. i will most likely do another one when i pick up another GX some time in the future.

[@gous5649]

@@GXBOB thanks; looking forward to it. I just found your channel now through that video. New subscriber here, now. I'm waiting for the 2022's to become available here in Canada. I'm either going to keep saving for that or if I can, attempt to hold out for the re-design. (2023?)

[@enriquejmayes8923]

Thanks Bob, keep up the good videos. I’m planning to buy a 2016 base model and do the face lift on it. 👍🏻

[@GXBOB]

Facelift on the base model is a piece of cake. Remember to keep your old emblem if you want to save money. I have another video to show you how to install the older emblem

[@mrd82161505]

@@GXBOB what model GX truck do you have?

[@FF-xl7yw]

Hands down.. your are the best GX genius! Awesome.work. now I need to see the emblem video. 👍👍👏👏👏👏👏👏

[@GXBOB]

Does FF stand for friendly fire? Just asking just in case we go get sent to the same platoon together when Russia attacks.

[@FF-xl7yw]

@GX*BOB hahahhhha!!! It's short for my name! Keep doing great things with the GX. I am waiting delivery of my 2022. Kind of torn between a white (my current was white) and atomic silver.

[@GXBOB]

@@FF-xl7yw you can’t go wrong with either color. Both are nice.

[@javigarciayt]

Thank you for this I did this to my 2016!!! It looks bad ass

[@GXBOB]

Money well spent, right???

[@saggarwal01]

Very helpful thank you!

[@SwtGemBabe]

I'm excited 😁 just ordered the 2 parts. I have a 2016 Base + a handy husband 😄

[@GXBOB]

Hi Joyce. Im glad you have the base. I have quite a few GX base model tutorials on this channel. Our next project is the 2021 headlamp conversion in which I'll be doing very soon. Welcome to the channel Joyce!

[@br1242]

Hi Joyce what was the cost for the 2 parts? I’m getting ready to purchase them and I think the price has gone up on them. Just like everything going up in price 🙄

[@SwtGemBabe]

@@br1242 QuantityProductStock NumberPrice EA1Grille5310160G30$542.191Grille (Lower)5311260340$139.87 * Items marked are not eligible for discounted pricing, but do contribute to reaching the discount thresholds Your order summary:2 products , 2 items$ 682.06Est. Shipping & Handling to 11xxx $ 54.99 Total $ 737.05

[@kuchichichi]

@@SwtGemBabe did you buy from a dealer?

[@hayourmykunb.r3610]

Thanks for the info guys . I actually just ordered both the upper and lower grills at Bell Lexus North Scottsdale AZ for $682 with free shipping. The code will be provided to you on orders over $100.

[@spencermarrow6365]

Appreciate you, GXBob!

[@GXBOB]

Thanks for watching!

[@ellocovg]

I just picked up a new to me 2014 Premium with 46K and I have to say you are a bad influence! I’ve been addicted to your videos for the last week and already have a point of attack! I’m going to order parts on Monday after work hopefully to do the grille mod. On the GX forum a member mentioned that you would also need 52719-60040 which is a $150 molding. Obviously if I don’t need it I rather use that money for other items that I’m going to blame on Mr. GX Bobs peer pressure!! Love the content you are very informative but also Uber entertaining.

[@GXBOB]

Statistically, my channel have caused 11% of the divorces out there.

[@dukesapini5553]

Thanks Bob

[@abdulrahmansaleh9546]

Looks great!

[@GXBOB]

Thanks, hope you attempt the facelift. Any questions, just let me know!

[@doctorwgca]

Please keep up the great videos 2014-2019 GX 460!!! I put on the led under lights and door lights. Used a different technique on the led reverse lights! How about wiper replacement? Same as your 2010-2013 video? Awesome!!! Thank you!!!

[@GXBOB]

All the wiper replacements are universal on the Lexus. All the generation GX has the same type of clip adaptor that comes with every wiper package. Super easy.

[@EvolutionofselfwithNathanSabir]

Just did. Mines man it was hard with the camera. I got the dermal and had to take my time cut out the hole for the camera. The one it comes with is too small. It took a min but I got it. It looks amazing. Remember if you have the front camera you want grille part number Part No.: 53101-60G40. Good luck. Thanks man you help me a lot. Switching out inside lights next.

[@GXBOB]

The best part is doing it yourself. Great feeling after the last screw is installed and you step back to take a look at your work.

[@familygromscarsfun3896]

Awesome video, thanks bud!

[@GXBOB]

No problem!

[@jerrygibbs1831]

Bob, your causing me to bust my budget $$$$$$ but love it.

[@GXBOB]

Jerry, my intent is not to go broke by myself. If I'm going down, everyone is going down.

[@gilbertrios5283]

@@GXBOB Bob you're too much Haahaa!

[@christophercolby2202]

Thanks for the make it easy video.

[@GXBOB]

You're welcome Christopher!

[@Dshzzzt]

Neat project, thanks for sharing. Too bad you can’t do this with the 2020’s triple beam headlights... THAT’S what I would want for my 2019.

[@GXBOB]

i realized quite a few people asked about that. Sounds like an expensive project.

[@Dshzzzt]

@@GXBOB yeah... it's b/c those trip beam lights only really "work" (auto-adjust) when connected to the Safety Sense camera/sensors that only come on the 2020-newer GX.

[@user-uo4yv2or5q]

Great video. You just gain another subscriber !

[@GXBOB]

Hey, thanks a lot. Not sure if your profile name is in Thailand but I'm just guessing. Welcome aboard.

[@user-uo4yv2or5q]

@@GXBOB Cambodia. Yes, we all looks the same 😀

[@austinw7028]

Awesome Bob! Now can you show us the overseas prado front clip swap please and thank you!

[@GXBOB]

Not sure how to without having an overseas prado in possession.

[@anthonyjohnican5455]

Thanks for posting this! I was thinking to do the same thing. Please do a walk around video after installed. Do you have a IG page with grilled installed?

[@GXBOB]

Here you go. I have quite a few videos if you want to look thru the library. I will be doing the 2021 headlamp conversion next, so stay tuned. kzbin.info/www/bejne/fXm5aWaJZcSNZ7M

[@amilasenadheera]

❤ Good stuff Bob

[@GXBOB]

Nah, i've seen better.

[@jica7262]

Hey Bob, you might make a video of installing Tesla style info unit. It should be a very interesting one. Regards, as always excellent videos.

[@GXBOB]

Way ahead of you. I'm trying to capture sponsorship but a couple of them didn't like my unprofessionalism in some prior video and kindly denied me. Its a little expensive for me to buy on my own since i'm going to sell my car and get another GX to start over again with better updates.

[@eketony]

Lucky you have the base / premium trim so no need to worry about the front logo camera + RCC sensors . Possibly they might + recalibration 😬

[@GXBOB]

There's a lot of things missing on this base model that i wished i had. I didn't realize it till i started looking around my car. )=

[@doctorwgca]

@@GXBOB I'm glad that I have 2014 Base - I like simple and easy. I did the logo hole first - Doing the install in the morning! OH YEAH!

[@jwee576]

Hi Bob, May you make a video on how to remove the door sill plate to add a door sill plate with an LED lexus sign.

[@GXBOB]

hey jonathan. I looked it up because it seemed like a good task to tackle until I saw the price. Its upwards of $200 plus.

[@tomsoir]

Thank you, Bob, so much for this video. I swapped my grill successfully and really love a new look of my car. One very odd question:))). When you changed the grill to a new one, did you notice that, (and it bothers me now) the bumper middle horizontal part is white, and you can easily see it behind the grill? I’m thinking to paint this part now (the cheapest solution), but I wonder how it looks on 2020 model (rhetoric question I guess:)))

[@GXBOB]

Yes i mentioned this a couple times on my other videos. I used wide black tape instead of paint and it looks fine now. Not noticeable.

[@tomsoir]

Oh yeah, even better! Thank you!

[@kirbloc5625]

Hey bob can you make a video of removing the chrome trim on the grill please

[@hungvuishare9706]

i like it , i have the 2017 GX460 you make me thinking

[@GXBOB]

Stop thinking and just do it. I'm here to help if u run into problems.

[@hungvuishare9706]

@@GXBOB thanks pro , I just did my 2022 Tundra kzbin.info/www/bejne/fqfKlohvjJaabZo

[@0923pramos]

Great video! Thank you for the info! Can you provide part #’s for the top and bottom grill you need to order.

[@GXBOB]

All the parts and part numbers are below the video. Click on the title. 😃

[@md8744]

Hi Bob. How to put license plate in front!! Thank you Sir. Happy new year 2021

[@GXBOB]

I chose not to put a license plate holder because it's ugly. I"ve had the car for awhile and have passed by many many highway patrol officers. Not once have i gotten pulled over for it. If u decide to go that route, you would have to buy a license plate holder from the dealer.

[@yuman231]

Great video! I have a 2017 GX460 and I am going to change the grill. Do you know if it affects any warranties?

[@GXBOB]

If your grill has sensors attached, it might void warranty as you have to custom install them back into the 2020 grille. As far as powertrain and mechanical warranties, I doubt it.

[@graysonatlas]

Hi Bob, I’m thinking of getting a steel bumper for my GX. My only concern was if I might mess with a crash airbag sensor. I’m not sure if it has one so I was wondering if you noticed anything that resembled it? I know the GX also has a crumple zone but I’m curious if I would affect any airbag by getting an aftermarket bumper

[@azamatnagaev7147]

Bob can u pls share Where we can get it front grill and headlights 2020-2021 I have same lexus gx 460 2017 Want to make new body like u U channel is the best

[@GXBOB]

all the information is in the body of my description with the prices.

[@gherzberger]

Great video! I’m getting ready to do the conversion on my 2019 Luxury. I have the sonar behind my emblem. Will the new grille accommodate that feature? Is the emblem in the new grille in the exact same location as my current grille? I just want to make sure there no interference with the new grille. Thanks!

[@GXBOB]

Hi Grant! If you go thru some of the comments below, you’ll also find some people mentioned additional modifications that my base model didn’t have to do. I have no way of answering your sonar question but i also found clublexus forums full of valuable help when people started attacking this upgrade.

[@polkmammoth1]

Love your videos man!!! You don’t happen to know the part number for the emblem do you?

[@GXBOB]

I used my old emblem from my 2017. Save money.

[@polkmammoth1]

Yeah I know but I like the look of the new emblem.

[@GXBOB]

@@polkmammoth1 I did look into the new one but when i window shopped around for one during that time, they were super expensive unlike the $50 ones you find on eBay for older models. The good thing about the older ones is you can spend the money you saved by plastic dipping it in black or have a body shop paint it metallic black. I eventually want to do black emblems and keeping the old emblem was the way to go.

[@vincentdemarco6374]

Bob, this is great! I was literally just thinking about doing this project. Perfect timing! Hard to see it, but does your top grill (5310160G30) have the spot for mounting the front camera under the Lexus emblem? I have a 2019 Luxury and it has the front camera.

[@GXBOB]

I do not see any cameras mounts under my emblem. I only see 2 holes on my bottom grille. I think they're for parking sensors. I would call Belle Lexus parts dept and ask to be sure. They're really nice and helpful people.

[@oscarnieto3502]

Did you guys get this part number?

[@vincentdemarco6374]

@@oscarnieto3502 which part number are you referring to?

[@oscarnieto3502]

Vincent DeMarco the upper part, I have the front camera

[@vincentdemarco6374]

@@oscarnieto3502 For a model with the front camera, you will need Top Grill #5310160G40

[@MrJasonBehr]

Bob, you notice any issues with your bumper cover not fitting snug by the headlights? On the Clublexus forum a lot of individuals have issues with the bumper cover pulling away from the headlight and fender. Curios how those clips worked when you reassembled the cover to the vehicle. They are reporting to Lexus to see if a "fix" can be issued by Lexus, seems this is more than a "one off" issue with the bumper covers.

[@GXBOB]

I did get that with my 1st and 2nd generation GX's. Fortunately, i did not experience it with my first reinstall on my 2017. Clips were new and still tight as hell. It held up pretty well. But i do know what you're talking about.

[@kamranbasharat1936]

Thank you for a detailed video and your attention to details. I am thinking about upgrading my 2015 front grill to 2022 front grill. Lexus is running a promo where I can get top and bottom grill for $689 including taxes, shipping. But ebay have one for $450 including taxes and shipping, my question is how's everyone experience buying on Ebay and any knows issues or problems with discoloring etc yet?

[@GXBOB]

I avoid ebay at all cost. The costumer service is lacking. The return and exchange is nonexistent. I would pay the extra for peace of mind.

[@bobg6715]

And here I am wanting to chop up my 2020 bumper and grille just so can I install a bull bar, lol

[@GXBOB]

Noooooooooo. Those are friggin fugly

[@jcmcadams08able]

I’m wanting to do the exact same thing to mine. We have a 2018 gx460

[@GXBOB]

Don't let it scare you. Do it.

[@Legacyyyyyyyyyyyyyy]

I am looking forward to doing this soon. I have seen several comments saying that you can run into some issues with the parking sensors? Have you seen a guide anywhere highlighting how to work around this issue?

[@GXBOB]

Follow this thread: www.clublexus.com/forums/gx-2nd-gen-2010-present/937611-2020-gx-front-grill-on-2014-2019-a-11.html

[@Legacyyyyyyyyyyyyyy]

@@GXBOB ty!!

[@Legacyyyyyyyyyyyyyy]

Got it done. If I had to do it again though, I'd also spend the extra money on an emblem. Thanks for the video

[@seekfactsnotfiction9056]

@@Legacyyyyyyyyyyyyyy Was the old emblem headache to transfer onto the new grill?

[@seekfactsnotfiction9056]

@@GXBOB Bob I got the luxury trim and wondering if I should take it somewhere to be done, because of my hectic schudule and not being tech savvy, any shop you suggest to have it done...?

[@anirudh0000]

Thank you, does your car have Dynamic Radar Cruise Control and do you need to make any special adjustments for that?

[@GXBOB]

No. I have the base model.

[@joepogiest]

thank you!

[@GXBOB]

Any time Joe and good luck!

[@seekfactsnotfiction9056]

@@GXBOB so this new face can go into a 2014 GX460 as well?

[@GXBOB]

@@seekfactsnotfiction9056 yes!

[@GXBOB]

@@seekfactsnotfiction9056 2014 to 2019 will work because they all share the same hourglass fit.

[@seekfactsnotfiction9056]

@@GXBOB Thank you!

[@vorticity4]

I searched on your part numbers. They are for the old grill 14-20.

[@GXBOB]

If you click on the title, a drop down appears that lists all the part numbers. Those are the part numbers i got off the Lexus bill of sale for 2020 and up. Many people already confirmed they are the correct part numbers.

[@chuckkerber4735]

Nice video- I have an RX 450H, but have always wanted a GX. Could you have just bought an emblem for the front? What was the cost? Next time take a shot with the front grill assembled and complete!

[@GXBOB]

Top Grille #5310160G30 = $542.38, Bottom Grille #5311260340 = $139.93. Lexus Emblem = Use your old one from 2016 with my other video. I bought both top and bottom grille at Bell Lexus in Scottsdale, Arizona because of No Tax and Free Shipping promotion going on till the end of August 2020. I did not purchase an emblem because the cost was upwards of $300 for an OEM 2020 Lexus (which is ridiculous). Another commenter said he just recently made the purchase from Belle Lexus and the grille was on sale. Check the comments made by Andy Nguyen below (He spent about $300 when it went on sale) parts.belllexusnorthscottsdale.com/

[@jeftechirinos]

Hey bod i saw your video i thought it was hard to install but thank god it’s not. Do you know how to install the set of three chrome lower trims that goes at the front bumper. I’ve just got them but I don’t know how to install

[@GXBOB]

Sorry, I have never made an attempt to install the lips but I'm sure it's not too difficult. I would have some tap screws on hand with 3M double sided tape.

[@SamAtake]

Thank you BOB !!! How about mounting a license plate? how did you install it on your new grill?

[@GXBOB]

I chose to leave the ugly license plate off. Who knows, I might get a ticket and resort to installing one in the near future

[@SamAtake]

@@GXBOB Are there any side mount for the license plate you know off? I tried to order parts from my local dealer in SF, which was pretty expensive - then I called the dealership you mentioned in AR, and it was a great deal! - just like it says in the description under your video. Plus, free shipping. Thank you, Bob, for the instructions! Installed and it looks fantastic, but unfortunately got a FIX ticket and I do have to install a license plate - I'm thinking about a side mount, but I couldn't find anything that fits my SUV.

[@GXBOB]

@@SamAtake Your best best is doing a custom bracket. The minute i get a fix it ticket, i will consider making a bracket. But until then, i'm gonna ride without one.

[@azamatnagaev7147]

Сэм Ата я русскоговорящий Где вы купили решетку для лексуса и фары новые ? У меня gx 2017 хотел решетку и фары от 2020 gx .

[@azamatnagaev7147]

@Сэм Ата если вы тоже заменили Дайте консультацию пожалуйста

[@herodtrt5576]

Hi bob, can i use the part- 5310160M10 instead of 5310160G30. Its a grey finish top grille instead of crome, and use the bottom for 53112-60340.

[@GXBOB]

It looks like it’s compatible. As long as the fitment is for the 2020+ GX460, you should be good. Just keep in mind that they’ll be extra steps you’ll have to figure out if u have cameras or parking sensors. Read other comments below and it should guide u in the right direction. Good luck

[@md8744]

Hi Bob could you check new grill install, what about 2 front sensors on grill. They still work or no more. Thank you Sir

[@GXBOB]

My base model does not have parking sensors.

[@tablinanower1278]

Hi Bob I was about to order but when I order the exact 2 parts with the parts number you provided, website is saying it fits model 2019 to 2022, but I am assuming it fit your 2017 model so it should fit in my 2015 model too ?

[@GXBOB]

It will fit 2014 and up. Just bare in mind if you have parking sensors, you’ll have to do additional modifications. Not that difficult, there’s a few posts on that subject to guide you.

[@moneersharifi3211]

So helpful thanks … Does it fit in 2010 GX

[@GXBOB]

2014 and up

[@byang404]

Omfg is happening to me now

[@gleblanc8523]

Hi Bob, bought an AFTERMARKET 2020 grill from CA for about $420 on eBay. I am worried about moving the Parking Sensors to the new grille. Any thoughts or advice since you did not talk to this in your video? Thanks in advance.

[@GXBOB]

Yes someone did an awesome write up on that. Read thru this thread. www.clublexus.com/forums/gx-2nd-gen-2010-present/937611-2020-gx-front-grill-on-2014-2019-a-11.html Also go thru the comments below you, people also discuss it.

[@ChiChi-dj9mo]

Let’s update front and rear lip kit of gx460 2020, waiting for you sir, LIKE 🤤🤤

[@GXBOB]

hmmm.........let me do some research.....

[@ChiChi-dj9mo]

BOB do you buy the grille OEM or after market mr Bob ? I want one too. If you have a part number please give it for me. Thank you

[@GXBOB]

​@@ChiChi-dj9mo Hey Chi Chi, I listed all the part numbers and where I bought it in the body of the title. They are original OEM 2020 Lexus GX460 top and bottom grille from Belle Lexus of Scottsdale, Arizona. They were the cheapest online because They provided free shipping and NO tax. If you look at the comments below, someone was able to purchase the grille on sale at Belle Lexus at the fraction of what i bought it for. For more details, look at the replies i made to "Andy Nguyen" in the comments below. Thanks Chi chi !

[@rajr3500]

Do you need any special tool to remove the entire front bumper?

[@GXBOB]

10mm socket and flathead

[@mervinblack1]

Question regarding sensors on the new 2020 grille? I recently bought the upgraded grille for my 2016 GX460. My 2016 sensor clips are not matching up with the new 2020 clips..My mechanic says he might have to cut and use epoxy to get it to work.. Wondering if you have any ideas or insight on adapter clips that match up? To avoid any type of cutting ? :( You seem to only have the Base model w/o sensors... @GX*BOB

[@GXBOB]

Follow the link below. They discuss the sensor mod for this grill upgrade. Hope it helps. www.clublexus.com/forums/gx-2nd-gen-2010-present/937611-2020-gx-front-grill-on-2014-2019-a-17.html

[@MR-06]

Hi do you know if the exterior door moldings on the earlier GX460 models can be removed to look like the 2021+ doors? I’ve read they’re either held by adhesive or clips with holes, thought you may know. Thanks

[@GXBOB]

Hi MR. I actually don’t know but interested in why you would consider that. Is it merely aesthetics?

[@MR-06]

@@GXBOB yes purely aesthetics going for the black line look: kzbin.info/www/bejne/mZacZXWrg96HsNU

[@GXBOB]

@@MR-06 Gotcha. I've done quite a lot of mix and matches between years but have never considered the black trim exchanges. I would rather try to do the plastidip or hyperdip route than to spend the Lexus OEM parts costs to do the upgrade. I did consider it. To answer your question...i do not know nor have i ever crossmatched them.

[@DouglasMiller911]

Why did you remove the bumper? I can access it all the screws from the top except for the two bottom corner screws which can be reached from below.

[@GXBOB]

There are many many approaches to doing this but this way makes for a better tutorial angle instead of routing a camera with one hand and removing screws with the other hand, all in a dark confined space.

[@MrTeslaX]

I don't think facelift is complete without swapping the headlights as well. Did you have any pointer on affordable headlight upgrade?

[@GXBOB]

kzbin.info/www/bejne/r3ywoYGgoteKpbMsi=hK0sfyb6M6tH-mPn

[@gvinianidzegivi]

Cool, where did you buy it ?

[@GXBOB]

Click on the title and a drop down will give you everything you need to buy it.

[@ledzeppelin7554]

Hey bob do you think my logo will fit this grill I have a 2015 gs and the emblem is different than yours… it changed in 16…so you know the part number for the logo for the grill??? I’ll see if the dealer will match the low price… I like your emblem mine has the deep sides around the L

[@GXBOB]

i believe my 2017 front emblem comes in 2 parts from the dealer. 75311 is the emblem and 75312D is the base plate it sits on. parts.lexus.com/a/Lexus_2017_GX-460-Base/_65510_6719284/EMBLEM--NAME-PLATE/782410-7551.html

[@ledzeppelin7554]

I’m talking the part number that fits the 2020 grill…. Sorry about that I think u have it u said u checked a price before thanks

[@ledzeppelin7554]

Need the part number please for the 2020 emblem

[@freedomisnotfree3536]

Question for you Bob. Was there a reason you were not able to use an original chrome molding, which wraps around outboard corners of the original grille. I noticed when you purchased a 2020 grille, you also purchased a new molding as well..

[@GXBOB]

Nope. No new moldings were purchased. The original moldings stayed intact. Only the top and bottom grill were changed out

[@freedomisnotfree3536]

@@GXBOB I take your word for it. It just looks like in the video, when you removed the old grille from the bumper and you move it out of the way, the chrome outer molding stays on the old grille. Then, on the same take of the video, you begin to connect the bottom piece with the top piece of the grille. And I see other (chrome or nickel finish) outer molding preinstalled on the upper portion of the 2020 grille. From my previous lexus project experiences, I know that chrome piece is usually sold separately. And I am just curious will the original 2014-2019 chrome molding will fit 2020+ grille? And if it does, is there a reason you did not remove yours from the original grille and reinstalled it onto the 2020 grille? Thanks again.

[@GXBOB]

@@freedomisnotfree3536 ahhhhhhhh now i know what you’re talking about. I had to watch the video again to make sure. The old grille and original molding was replaced with a new 2020 grille and molding. When you order from the Lexus dealer, the new moldings come attached already. They don’t come separately or sold separately.

[@freedomisnotfree3536]

@@GXBOB Got it! I understand now. But otherwise the old chrome molding would be a direct fit? Correct?

[@GXBOB]

@@freedomisnotfree3536 direct fit.

[@Paata02]

please help! I have luxury model with parking sensors and sensor doesn't fit. will new 2020 model sensors work?

[@GXBOB]

Peter, i believe some other folks mentioned the same thing within the comments . They modified it to make it fit. I'm not able to attempt it as a tutorial since i don't have that issue. But i'm sure if you stare at it enough, you'll figure out how to remove it from your oem and attach it to your new bumper.

[@mervinblack1]

Can this be done the old style grill you removed from yours but with that New Spoiler fascia below..Along sensors and head light washer..

[@GXBOB]

Lucien, the bumper is identical. Changing out the grille doesn't affect the outline of the old/new bumper. So i'm sure you can still add the sports lip.

[@md8744]

Hello Bob. May I ask u this!! You said ordered these pieces from dealer charged 600$ something right don't know why I order they charge 1100$ for upper lower both?!! Thanks

[@GXBOB]

Mark, not all dealers give the same price. My local dealership charges more than if i ordered it from an out of state Lexus dealer. I've had really good luck with Belle Lexus in Arizona because they also sell their stuff on amazon. Plus, they were giving discounts during covid-19 for awhile. Not sure if that sale is still ongoing but during that time, shipping was free too.

[@maxqualityglass8947]

Will I have sensors in the grill if I have luxury package but don’t have the driver assist package? Thanks

[@GXBOB]

Only one way to find out Max......

[@PhilipViet]

Why you need all the works and money for facelift? Does it make the vehicle any better?

[@GXBOB]

You remind me of my father. Old Asian mentality. Really really old way of thinking. What you describe as work is considered a fun hobby to me. What you describe as waste of money is considered money well spent. That’s why i taught my children to not judge other people. Do what makes you happy. Spend what you can afford. In the end, you are the one that will stand back and be proud of what you accomplished in your quality of life. That’s why i would never question why you do what you do to your house or car or anything else. But if i have to answer your rhetorical question, the answer is yes, it made the truck better…. For me and that’s the only person that matters. I’m very glad i have been in America long enough not to resort back to the old way of saving money and being practical and i know my children will thank me for it. 😎

[@Kaizen2013v]

I've seen clips of 2010-2013 models changing thiers to the newer face. But it looked like they converted the whole bumper. I haven't seen any write ups or clear videos as most I've seen are crappy vids with no explanation. Anybody know of anyone here in North America that's actually done this?

[@GXBOB]

Hey Kaizen, i can't say that i have. I know of one person that have purchased my 2017 grilled to do a install on his 2010 generation but i don't think he did a tutorial on it.

[@Importeck]

Do you guys have the part numbers to order? I have a gx 2017 without front camera.

[@GXBOB]

Hi Importeck, the part numbers are in the body of the description provided by Bell Lexus of Arizona.

[@alinavolkova8934]

Hello BOB, My question is about the steering wheel, 2020 steering wheel can fixed in to 2017?

[@GXBOB]

I would love to attack this install myself since i have a base model and want the more modern look. I'll check it out one of these days for sure.

[@Sarahk944]

Hello Bob can I swap my 2014/15 GX front grill & heads light with new 2022 GX ? And if your answer is yes then best place to buy grill & lights? Dealership or online

[@GXBOB]

yes you can and i listed all the parts and part numbers below my video. Click on the title and a drop down should appear with the body of the description including my commentary. Bare in mind that there needs to be other minor modifications if you have parking sensors/ headlight washers, etc...but just scroll down the comments and you'll see a few people talk about it. Its fairly simple and straightforward.

[@jayf2717]

What is all needed to make a 17 or 18 GX look just like a 2020

[@GXBOB]

is this a trick question?

[@lincolnlibby2086]

I’m going to do this, do you have the part number for the license plate holder

[@GXBOB]

Don’t install the license plate holder. Its ugly.

[@forataysif8043]

Hi Bob, I have question for you my car is Gx2013 can I get the 2021 bumper? Thank you for your advice.

[@GXBOB]

yes you can. Alibaba sells the 2010-2013 conversion to 2020 kit. Not cheap but hey.....if you got the money go for it.

[@shafquatrasool4551]

Mr Bob can you please help me out I have a 2013 Lexus gx 460 I want to upgrade grill & headlights but don’t know from where I can buy these parts thank you

[@GXBOB]

carmarka.com/en/lexus-gx460-2013-genuine-conversion-face-lift-bodykit-2014-2019-look-cm-gx460res12fspr

[@ahsanjamil5887]

Hi bob did you change trunk emblem on your Lexus gx 460 ?

[@GXBOB]

No i have not changed it to the newer solid emblem.

[@ahsanjamil5887]

K thank you I install new lights and grill in my Lexus today your video help a lot thank you

[@DouglasMiller911]

Where did you place the original parking sensors? I am mid install and am considering placing them in a nearby slot.

[@GXBOB]

My model did not come with parking sensors. This is where you're going to have to depend on your own creativity.

[@DouglasMiller911]

@@GXBOB I found I was able to use one of the waffle openings adjacent the OEM ports that had the center support behind it to firmly place a sensor. I secured the sensors with small black zip ties to keep everything keep pointing true and straight. It is actually invisible to the eye and only took one adjustment to keep from experiencing a occasional phantom false reading. Please with the end product.

[@GXBOB]

@@DouglasMiller911 that's awesome Douglas. We always find a way

[@stevennguyen8855]

@@DouglasMiller911 can you take a picture of the placement ?

[@ayesharonaify9311]

Mr. Bob can you please tell me where can i find this after market grill & headlights thank you

[@GXBOB]

Hey, i have a video that is part 2 of this called "Chinese headlights from China from a Chinese person" that pretty generally explains why i won't promote my supplier. If you go on ClubLexus.com, you'll have more luck with a better supplier. Ask "ACRAD" to point you in the right direction.

[@ayesharonaify9311]

@@GXBOB thank you

[@danmira9727]

Will this work with a lexus gx 460 2011? If so which parts are needed?

[@GXBOB]

2011 doesn’t the hourglass cutout like the 2014 and up does. So it won’t be plug and play. Yours will require more extensive work and another bumper. People have done it but i haven’t yet

[@brigetteh3865]

Are all the 2020 grills 2 piece? I’m seeing some for sale that only show 1 piece and the whole thing

[@GXBOB]

Those are chinese aftermarket. 2 piece are from Lexus.

[@brigetteh3865]

@@GXBOB thank you, very helpful..

[@md8744]

How much cost for the grill 2020 Bob!??? Thks

[@GXBOB]

Cost of everything to do the facelift. Top Grille #5310160G30 = $542.38, Bottom Grille #5311260340 = $139.93. YOU NEED BOTH GRILLES TOP AND BOTTOM. Lexus Emblem = Use your old one from 2016 with my other video

[@MrBuivanthien]

All new front grill 2020 GX460👍

[@GXBOB]

Soooo....did you do it Bui?

[@MrBuivanthien]

@@GXBOB .. did what .?

[@GXBOB]

@@MrBuivanthien The 2020 front grille.

[@Ryan-Zhang]

When will a video update the tire pressure monitoring system

[@GXBOB]

Not sure what that has to do with the facelift mod Allan???

[@Ryan-Zhang]

@@GXBOB Thank you for your reply, I just want to know whether the GX460 tire pressure monitoring system can be changed to a digital monitoring system

[@GXBOB]

@@Ryan-Zhang To be honest, i haven't a clue. Never really looked into it and i don't believe my year GX even cares.

[@wms201]

You think this would work on 2017 RX ?

[@GXBOB]

From GX to RX? God No. From RX to RX.....that i have never attempted but it would be a great experiment to ask someone that owns an RX KZbin channel. I just don't have experience or that vehicle to answer your question. But....I would take a tape measure to your local dealership and start making measurements to get a feel .

[@dracula1980]

that hair cut was a choice

[@GXBOB]

It was free.

[@dracula1980]

@@GXBOB no it wasn't. You paid for it

[@dracula1980]

Paid for it dearly