2014 Explorer Sunshade Initialization or Reset

How to re-initialize, program, or reset the power sunroof shade on a 2014 Ford Explorer. Should work on other year models with this same switch setup
Here's how to replace the sunroof motor. This works for the shade motor as well, it's just on the right side instead of the left, it's an identical process:
• 2011 Up Ford Explorer ...
How to clear the sunroof drains that cause a water leak and the motor to fail:
• 2011 Up Explorer Sunro...

[@Jeffangable]

The standard all KZbin mechanics should aspire to. A problem that’s been plaguing my friend for a month solved by a 4 minute KZbin video where the solution was EXACTLY what needed to be done with clear instructions. 10/10 would watch next time something breaks but isn’t really broken.

[@beatrizsambolin7551]

I must thank you so damn much for this step by step video ❤😅 I’ve been having my sunroof shade stocked for MONTHS now & I wasn’t able to figure it out 😊😅 thank you again and please keep making this content ❤❤

[@jareed505]

Are you kidding me?? Been driving my 16' like that since I bought it 6 mo ago and that beating sun's been driving me nuts these hot summer months..Your a blessing brother. Thank you!

[@Hi-Dee111]

WOW!! I'm so happy right now. It worked for my 2015 Explorer!! I was so frustrated for months and months and with heading into summer I needed it closed. Thank you so so much for taking the time to publish this video.

[@gatorgirl917]

THANK YOU!!! I had this happen to me yesterday morning and didn't know what to do. I came across your video and IT WORKED!!! Thank you so much🥰

[@robertrice2811]

Worked on our 2011, be patient when waiting for the slide to go back, it will. Took us 2 trys 🤟

[@Stonedmafiaco]

Fck YEAHH !!! Man U just fixed my problem right now 03/01/2024 @ 9:01 pm. Was about to pay someone big money , also replaced the motor before this

[@anawt1]

THANK YOU!!!! I just bought a 2019 & the dealer replaced the battery prior to me picking it up & my darn sunshade would pop open every time I tried to close it! This worked like a charm!

[@jacksonh.7]

Thank you so much man been driving without the sun visor in the front forever

[@whatapane1]

It worked!! My sun shade was stuck half open and now it's fully closed. Thank you!

[@SealofPerfection]

Awesome! Glad it helped

[@officialholyxcaramel9416]

How you did it exactly?

[@thisguyrighthere142]

Thank you!!!!!!!!!!!! The last pull it's all the way closed I'm sooooooo happy you made my day

[@SealofPerfection]

Put some tape over the switch so nobody opens it again. It probably needs a motor due to water intrusion.

[@1000yearz]

Dude!!! Thank you sooooo much!! Life-saver man. Truly

[@jefftowell]

Thank you, it worked for a 2016.

[@JD704.]

Dude,THANK YOU!!!! I tried everything. Hit the subscribe button and notifications.

[@CEOADVENTUREZ]

Thank god this works 🤞🏽

[@adamhg985]

Thanks this is what I needed!

[@capiberra4118]

Very helpful video, thanks!

[@josecustodio8348]

Thank you very much it worked on mine🙏

[@VanessaMartinez-mc2jx]

You're great , thank you for your help.

[@timothyjernigan6774]

Man you the best thanks bro 👍🏾👍🏾👍🏾👍🏾👍🏾

[@curtcoughlin1928]

Perfect……thank you!

[@ricsuyman]

Big help! Thanks

[@AZULJP27]

thank you it helped me

[@SealofPerfection]

Glad to hear it

[@magege2756]

Thanks a lot it working

[@SealofPerfection]

Great news!

[@kajuanliggins6522]

Thank you ❤

[@davidretro2218]

I have a question I have recently purchased a 2016 explorer with dual moon roofs just like this one in the video and I’m wondering is the rear (back moon roof) suppose to open like the glass slide and be fully open ???

[@SealofPerfection]

No the back glass is fixed and does not move

[@richardgarcia8633]

Gracias 😁 funciona

[@fogit4668]

Thank you.

[@markymark34]

Hopefully you are still around to help here…I have a 2013 Explorer sunroof motor that burned out. Replaced the motor and tried calibrating. Wasn’t working then noticed the guide rails were uneven making the sunroof crooked. I removed the glass to take a closer look but seems like I need the motor to spin the opposite way to even then out…if that makes sense. Any ideas to try?

[@SealofPerfection]

Did they get that way when you had the motor loose? If so, do this: Drop the motor a bit so the gear is disengaged from the cables. Then line up the guides. They will move independently when the gear isn't in place. Tighten the motor, and perform the initialization again. Hopefully the track itself isn't broken.

[@citlallyrv4783]

Siempre me funciona 🎉

[@lukefennacy6755]

This playlist was perfect in helping me replace my motors and stop the problem from happening again (snip the drain line exit). I bought the A-Premium off amazon, and although it fits and works for the slide, it won't tilt and therefore and it won't program. I think I recall the creator, or other, mentioning that MotorCraft (OEM: MM-1038) is a better motor that IS PROGRAMABLE. Any other brands you know of that can be used AND programmed? Thanks in advance

[@SealofPerfection]

Someone commented here and claimed that they bought a motor from AutoZone I think it was, and even though it was supposedly an aftermarket motor it had the OEM sticker on it

[@jake9962]

Thank You for this video… I have replaced both sunshade and window motors, fuse, and just now, the switch. Still nothing. Any idea what this could be? I appreciate your videos.

[@SealofPerfection]

That's strange. Did you use Ford motors or aftermarket? I've heard of quite a few aftermarket motors that would not initialize. What was the initial reason that you replaced all of that?

[@kevinpadgett2563]

Is it necessary to have both motors working in order for either to work. Swapped shade motor with roof motor. Ran the initialization and went as shown in other video. The roof motor was burned up. After initialization the sunroof still doesn’t work but I only have the sun roof motor installed.

[@SealofPerfection]

@@kevinpadgett2563 they both have to be hooked up, they don't necessarily have to operate. Generally the way I diagnose whether the sunroof motor is bad is if the shade works but the sunroof will not work at all. But both need to be plugged in

[@Mattea68]

how do you slide the shade before opening the sunroof? there are 3 overhead buttons on the upper console

[@SealofPerfection]

There are two separate buttons, one for the shade and one for the sunroof. Usually the shade still works and the sunroof doesn't

[@EnriqueHernandez-et9le]

Buen vidio lo logre

[@grandpanero7284]

Thanks. Pls what if it won't move at all?? Initially it was moving and always stopped half way but after removing the switch it doesn't longer moving

[@SealofPerfection]

The motor is probably bad due to a water leak from the sunroof drains

[@grandpanero7284]

@@SealofPerfection thanks. I tested the motor with ground wire and it was moving fully back and half way as It was initially working or, is there another motor to move it from the half way to the full?? On the diagram showing only 2 motor. One for the glass and one motor works for the shade. The glass did not open at all but I don't care about that tho. Still need more settings???

[@SealofPerfection]

@@grandpanero7284 If the shade motor works, but the glass doesn't then the glass motor is bad, and it's almost always due to the water leak caused by the sunroof drains. I have videos for both fixing the leak and replacing the motor.

[@foster88888]

Hey man. Mine fully cycles after resetting it, but the moment I open it half way and try to close it, the issue repeats itself. Any idea on the issue? It’s a pain to have to reset it every single time I open the moonroof.

[@SealofPerfection]

Motor might be bad. All the circuitry is inside the motor if it will not stay programmed that is probably the issue

[@corywekerle6862]

Does this work if the glass part is stuck open?

[@SealofPerfection]

It might, but a lot of the times on these if that's the case the motor has gone bad due to a water leak. I have a video on how to fix the water leak and how to replace the motor

[@SealofPerfection]

See description for the reset/programming for the sunroof itself, and how to replace the sunroof motor.

[@antoineaustin9063]

Please forgive me if this is a dumb question, but is the motor that controls this the same motor that controls the tilt of the sunroof? I asked because my sunroof is stuck Open and I can't close it no matter how many times I push the tilt button. But the shade can be programmed and it works fine. Is that common? Is there a way to reprogram the tilt functioning of the sunroof? Thanks!

[@SealofPerfection]

It is the same motor. Most likely your motor is bad due to a water leak and water got in the motor and killed it.

[@Aaron_Davis]

Mine got stuck half way open, and stayed that way for several months before I finally looked up this video. I got it to close, and it performed exactly as described in the video all the way up until the very end. Can’t get it to fully function. It just goes back to being half open. I haven’t opened the glass since this problem began around a year ago. Because it was warm today I attempted to open it, and that isn’t opening either. So I think I have a much bigger problem

[@SealofPerfection]

Motor might be bad. The sunroof drains get blocked and the water spills into the motor. It has to be replaced to fix it totally, assuming that's what is wrong.

[@Aaron_Davis]

@@SealofPerfection thanks

[@IR8PIR8]

This is a great video. I am hearing a clicking from either side of the same overhead console. Do you think a reset like this would work or are they shot?

[@SealofPerfection]

It is possible. However, water intrusion does kill the sunroof motor quite frequently on these. Does the shade still work?

[@IR8PIR8]

@@SealofPerfection Last time I tried both went back but none came forward till I shut engine off then back on. Have not tried it since bc I have no garage to keep it under.

[@codyarchambault2323]

After completing the initialization/reset, my shade fully opened and fully closed after reset. When I open it again after the reset, I can still only get it to close half way and my glass will not open or tilt. Anybody have any ideas?

[@SealofPerfection]

The glass motor went bad. Most likely due to a water leak from the sunroof drains. And the shade won't close more than halfway because the glass is just shy of being fully closed

[@joshwezesa]

The panorama and sunroof shades in my explorer are stuck open. I have the same button console. No matter how long I hold the button down nothing happens. I can hear a click in the sunroof area when I press the shade button but that's it

[@SealofPerfection]

The shade doesn't even work?

[@ivanmendez7594]

Mi tela de quemacocos está colgada de la parte trasera que podría ser ??

[@SealofPerfection]

If the shade is hanging down, and you the the cloth power shade, then the shade itself is damage and likely will need to be replaced.

[@ClubJ-J]

Y para programar el de la ventanilla como es?

[@SealofPerfection]

kzbin.info/www/bejne/b3eWqomsbN-dY7s

[@nicos514]

Got the screen closed but the sunroof still does not function

[@juanpichardo303]

Same, replaced a blown fuse and only shade is half closing

[@nicos514]

@@juanpichardo303 does water leak in during rain?

[@SealofPerfection]

Generally if the shade moves but the glass doesn't, the motor is bad due to water intrusion from clogged sunroof drains. I have videos on how to repair all of that. And I'm sorry that KZbin didn't notify me of your comments or I would have responded faster. Only reason I see them now is I went to the video manually and saw them.

[@jwfabworks3141]

Just put two new motors in my 2013. The sunroof moved as well as the sunscreen. Now the sunroof doesn’t work again and the sunscreen only goes passed the moon roof about 6 inches and stops. The reset procedure doesn’t work.

[@SealofPerfection]

Factory motors or aftermarket?

[@jwfabworks3141]

@@SealofPerfection one is aftermarket the other is factory. I got the sunroof to tilt a couple times but only in the reset procedure. Does it once and then won’t do it again. Until I try the cycle over.

[@SealofPerfection]

@@jwfabworks3141 I've seen quite a few folks have trouble getting the aftermarket motors to initialize. Plus, factory and aftermarket is a bad combo as well. If you have the old factory motors, I'd put your new factory one in the sunroof glass spot, and the old one in for the shade, and see if the glass will initialize then. You don't even need to install the shade motor, just plug it in.

[@jwfabworks3141]

I’m going to pull it all back apart tomorrow and see what I can figure out. That sunscreen will close fully. Hit the button and it will stop half way. Hit it again and it slides about 6 inches passed the moonroof and stops. I may stop it there before I pull it apart then pull the motor out and try to manually open the screen all the way up.

[@RetNavyWife]

Mine wont work :( it rained and water went thru it😢

[@SealofPerfection]

That means your sunroof motor is probably bad. I have a linked video in the description of how to repair the leak. The sunroof drains get stopped up and the water spills into the motor and kills it. I also have a video on how to replace the motor

[@madellynbenitez4667]

my roof does not open and does not close it could be a ford explorer 2011

[@SealofPerfection]

If the shade works, then the sunroof motor is bad due to a water leak most likely

[@madellynbenitez4667]

@@SealofPerfection oh I understand thank you very much for explaining I appreciate it

[@SealofPerfection]

@@madellynbenitez4667 I have a video of in the description on how to replace the motor

[@fogit4668]

On my 5th time and it still will not work after I turn it off.

[@SealofPerfection]

Sounds like the motor is bad. All the circuitry and "module" stuff is inside the motor. If it won't retain that initialization, its "memory" might be bad.

[@fogit4668]

@@SealofPerfection On the 6th try it started to work.

[@SealofPerfection]

@@fogit4668 they are weird like that sometimes

[@user-rt2hc6gb2x]

Please....from MKX 2016....

[@SealofPerfection]

Same thing as an edge. I have a video for it.

[@user-rt2hc6gb2x]

Link to video, please.))))

[@SealofPerfection]

@@user-rt2hc6gb2x Depends on your switch setup. Look at these, and use the one that has the same buttons as yours does kzbin.info/www/bejne/anepqnx-rdyGd5o

[@SealofPerfection]

@@user-rt2hc6gb2x kzbin.info/www/bejne/jpylc6uJm9qDftk

[@fogit4668]

6th time I think it is working 🤔

[@SealofPerfection]

Have you replaced the motor? If not, you may need one

[@fogit4668]

@@SealofPerfection Yes. that is why I was resetting it. The old motor was filled with water. I took the new one and sprayed T-9 waterproofing along the edges. Once it dries it creates a wax seal.

[@SealofPerfection]

@@fogit4668 you need to clear the sunroof drains. That's where the water is coming from. And if it's an aftermarket motor, the programming is a little sketchy on those.

[@fogit4668]

@@SealofPerfection I purchased a Motorcraft motor. still trying to get the front drains to open the rear are flowing really well.

[@SealofPerfection]

@@fogit4668 I've never seen the rear stopped up but once. It's always the front