2014 HONDA RANCHER PLASTI DIPPED

[@brentwithers4584]

That black paint turned out nice asf I love how it came out

[@kylejohnson21]

After time how it’s the plasti dip holding up

[@cc103itsme5]

Not to be an ass..The bike looks good and its a great video BUT you may want to put your little girl in a different room so she's not breathing in the nasty chemicals...

[@TomBryan]

I was thinking the same thing.

[@keemccall6084]

cc103 itsme I was thinking the same thing

[@fourbyfourer]

I was thinking the exact same thing.

[@scottthoman7721]

we were al thinking the same thing

[@mikechambers1117]

Little brother please get your baby out of the plastic dip cloud!

[@miguelquiroz77]

Badass video man, glad you were the someone to make a video up dip on a 4 wheeler, there needs to be more people like you at there.

[@jdoyle843]

The first coat should never cover it. Your putting it on way too heavy

[@leeohfn2172]

went on just fine it may peel later but it be ight

[@danos9622]

Sorry never noticed the comments. It holds up fairly well unless u rub it against a tree. But u can touch it up and never notice the part that was messed up. It does get dirty easy and require washing it by hand to clean it but i use sc1 on it and that helps ALOT.

[@jakethequadrunnersnake642]

Never really seen an all black quad that's cool man hope it holds up

[@leighwheeler6892]

What color was the plasti dip

[@Yvessil]

How easily will this come off?

[@ChuckBeefOG]

You have to do lots of coats, 3 good thick ones for sure and try to peel and redo every year, year and a half. Especially in abusive environments like snowmobiles or quads.

[@obspowerstroke1864]

How long did the plasti dip last without peeling ? And did mud stain it any tricks to remove mud off plasti dip ? Did it peel easy

[@AddieB15]

Great taste in music 👍🏼

[@treydaniel9832]

looks awesome man, been thinking about dipping mine but i trail and mud a lot and dont want to waste my time if it doesnt hold up. how is yours so far?

[@Thelegend-gt5lb]

How many cans did you need to do it

[@TheFlatlander440]

It looks pretty good. But I always found that light repetitive coats work best. It's really hard to get an even spray pattern with a rattle can, an air compressor with a spray gun works a lot better. Additionally, you should have been wearing a respirator and your child should not have been anywhere near where you were spraying. You have to realize these are very toxic chemicals you're dealing with. Just say'in man.

[@MrHONDABOY350]

How does it hold up as far as trails, mud, etc??

[@willcarlile1743]

How can I get ahold of u to talk I need some tips on plasti dipping my 2010 Honda rancher

[@danos9622]

What u wanna know

[@mudmafia3158]

How is it holding up

[@monetmalisham5341]

Will the plastic dip hold up

[@danos9622]

Gregory Malisham yes. Sometimes u have to touch it up. When i pulled it off a year and a half later the plastic looked brand new. Made it worth it

[@hardr7194]

Hey man just a tip if you take the sticker off spray what ever color you want the sticker to be then you put the sticker back on and spray the plastics then take the sticker off then you will have a permanent emblem

[@danos9622]

Don vito that's how i would do my rc's

[@hardr7194]

Jason Danos did your can spray like shit like splatter

[@brandont9916]

You had a bad first coat because you went too heavy on that coat. Coat one provides a grip for second coat.

[@Broknex]

That's cool! I would like to try that on SOME of my wheeler. Does it rub off on your legs at all while riding?

[@danos9622]

It dosen't rub off on your legs but u will rub through it with your legs.

[@ryansanderson3867]

I wanted to do it to my bike but that shit here in Canada is 25 bucks a can

[@Matthew002262]

hey Jason just seen your video and I plan to use plastidip to protect the stock plastics on my atv my question is how well did the plastidip hold up to scratches is it durable or did it wear off quite quickly also will a pressure washer cause it to peel? thanks in advance

[@danos9622]

tree rubs would peel it but could be touched up. close direct spray from pressure washer will take it off

[@larryfournier4403]

You have to scuff that first, paint isn't going to stick to it good

[@xX-Durock-Xx]

not sure if you still the bike but how did it hold up?

[@danos9622]

it held up good unless i would rub a tree or something like that. but could touch up very easily

[@revo3423]

how's it holdin up??

[@mortonuhv]

Hey jason, how is the plasti dip holding up....?

[@singlepistonproductions3232]

Looks great! I have a green 420 but it’s a 2017 and I want it to be black so bad

[@mata168]

Nice vid! Is that a gloss black that you used?

[@danos9622]

It's the flat plasti dip

[@mata168]

+Jason Danos thanks

[@creativeexperience1171]

Awesome video

[@Darianlipscomb]

I have the same one except it's red

[@revo3423]

sorry just read ur past comments. thanx

[@alancall5113]

Why would you put that on your quad the first tree you brush up against it's all going to peel off weird

[@danos9622]

it would peel on trees but was easy to touch up

[@jdoyle843]

Your spraying way too much at once. You have to do very light coats and let each coat dry for 5 to 10 min. That's why it did that because you just painted it way too heavy. Dust the coats on lightly and do about 6 coats and it will look perfect

[@scottypetty9117]

Next time use a can gun..im currently redoing a atv myself

[@danos9622]

I think i used 3 cans

[@Mudlife11]

I know I'm late but was that for all plastics I want to do mine

[@sudzautodetailing2621]

Honda doesn’t make SC1 Maxima does

[@clarenceedgar6088]

u need to clear coat it

[@danos9622]

I seen that if u clear it then it makes it extremely difficult to peel off

[@wtftkd7348]

Who else herd if drinking don't kill me

[@danos9622]

wtftkd always jammin george

[@caseysimon6357]

...herd...? 🤦‍♂️

[@wtftkd7348]

@@caseysimon6357 I apologize. I was like 14 at the time. Can you forgive me?

[@mikeh3838]

It was better brow u mas it up

[@Thelegend-gt5lb]



[@Gamebit450]

WAY 2 much for first coat DANG!!!! WAY WRONG VIDEO TO WATCH FOR HOW 2!

[@singlepistonproductions3232]

How is it holding up?