2015 Peugeot 308 Automatic headlamp adjustment fault fixed!

[@diydaly]

New Rear height sensor - search part number 9817443780 - ebay.us/5kUD03 New wiring harness / connector - search part number 9830361980 - ebay.us/5kUD03 Tools used: Budget EOBD scanner eBay - ebay.us/IHpAfK Advanced EOBD scanner eBay -ebay.us/odL6V7 Socket set - ebay.us/7tUKdM Automatic wire strippers - ebay.us/2QMPP6 Knipex fine wire snips - ebay.us/eri4k2 Mini gas Torch - ebay.us/9Mvh9a Ratchet Crimping tool - ebay.us/jGeArf 3/8 Milwaukee impact driver - ebay.us/gvxqC7 trim clip tool set - ebay.us/WlkNLA

[@robbutterworth9296]

Thanks so much for this video, the ball joint on my rear sensor had worked loose and come apart. Clipped it back together again and it fixed the issue, put a bit of electrical tape round it to sure it up. Peugeot wanted £144 just to diagnose it!

[@diydaly]

👍👍 nice one glad to hear it

[@rhysdavies3944]

How do you adjust the full led headlights Mine seems too low especially on country roads can you help me with this thank you

[@diydaly]

There should be adjustment on the actual headlamp itself

[@yasminzaher7715]

I got this message, can you help me please ( Check the dipped beam headlamps?? 3008 GT line (2019+) after last front accident. my 2019 3008 1.6 Turbo - Whenever my lights come on, I get a "Ch eck the dipped beam headlamps" message a fault icon spanner appears, and a map on screen for the nearest dealers. On visual inspection, the lights all look fine - working, operational etc. Any ideas what...)

[@davidjenkins1877]

Hi. I've just had my lower axle arms done both sides front. I got the service light and headlight adjustment fault. Looking at you video I turned the steering full lock and had a look where the sensor is, it's been snapped and when going back to the garage they said we forgot to tell you before we did the work it was already broken which is bollox as I've never had the fault before and I comes on straight after they did the work. I'm now looking to buy one and get someone to fit it. Does it haft to been programmed with Peugeot or just fit it a go ? Thanks David

[@diydaly]

arr noo thats not good! you should be able to just fit it.. it might need the fault codes clearing thats all

[@samanthadobbins525]

I’ve got the same car mine says check front direction indicators do I just need to replace the bulbs

[@diydaly]

It thinks you’ve got a bulb out , presume you haven’t ?

[@andrewcandet]

Hi! In my case, a peugeot 2008 2020, i also get an error about indicator lights and they blink fast. In diagbox i get no communication from headlight adjustment ecu. Could be the same issue?

[@peterarries7879]

Nice 1 nobody knows everything, sharing is brilliant 👏

[@diydaly]

thanks for the comment 👍👍

[@lmr9512]

How much is it for this service

[@vRSPagey]

Hi, I haven't got access to a ramp. Can this be done by jacking up the car and taking the wheel off? Also, I followed your link to the part, but it just takes me to an eBay page with multiple Peugeot parts.

[@diydaly]

Hi , yes it an be done without a ramp.. im sorry about the links.. its because there wasn't any of the items available at the time but if you check the description ive listed the part numbers so you can search them

[@gopalakrishnanperiasamy6407]

Hi I have the same error in my car Peugeot 308-2015 model can you send send any garage to repair this problem near in Liverpool please

[@diydaly]

im not sure any any garages in Liverpool but most independents will be capable of dealing with it

[@MrRGM10]

Is this the same 2014 508

[@diydaly]

Yeah it should be pretty much the same mate

[@kayozniwki]

Thank you so much for this information. Save me time and money. Cheers 🍻

[@diydaly]

No problem 👍

[@jaketaylor6504]

i have had my front one changed and my lights are pointing very high do you know how to change that the warning light has now gone off

[@diydaly]

They may still need setting up correctly

[@castrolgtx5064]

Nice one 👏

[@diydaly]

👌👍

[@brentnearhood8874]

Thanks!

[@diydaly]

Thanks for the comment 👍

[@valsoobilic7444]

👍👍👍💪

[@diydaly]

👍👌

[@valsoobilic7444]

Thanks for this video, it vas really helpful

[@diydaly]

@@valsoobilic7444 glad to help, thanks for the comment