2016 Thermoking APU evolution

[@Jackyl82334]

Thank you for making this video, most of the settings are pretty straight forward but verification of terminology is awesome, well done, great video.

[@alexandrustanciu1989]

Thank you so much for mentioning in your video you’re using win7 because i was trying for so long to connect it with my windows 10 and no luck! Now with win7 I am able to change that voltage setting! Thanks again for your video

[@clintonkirker5154]

You are very welcome. I’m glad I could help.

[@thelab59]

My apu go to standby mode every time i open the dome light or open the doors,any idea?

[@youngxu401]

Hi man thxful just lit Q where I can download the diagnostic tools

[@wbgarywp]

Where is this USB port?

[@lawrencechesshire9410]

Man I know this 5 years ago but ty. Only one I can find to walk me through. Problem I’m having is when inverter is on apu won’t kick on when it drop below 12.5. It drops to 11.5 then it kicks on kicks my inverter off and getting E05 error. Hopefully changing settings will fix it

[@clintonkirker5154]

11.5 is a normal voltage cutoff for inverters. Definitely have your batteries tested individually, check your ground and possibly replace the battery cables going from the battery to the inverter with larger gauge cables. Also make sure the positive and negative cables are not connected to the same battery. For a 3000 watt inverter I would recommend no less than 0/1 awg cables.

[@franknavarro9507]

We need a softwere to do this ? Or just plug in on my laptop ? I just want to turn down the min temp from 60 to 50

[@clintonkirker5154]

I honestly do not know. When I made this video I was using windows 7. All you had to do was plug in the usb cord and open it like a thumb drive. I was never able to access the program on windows 10. I no longer have the unit. Just a fair warning, the unit isn’t designed to cool much below 72°, especially on extremely hot days. If you don’t get the desired result, I would suggest a second unit that can run off battery. I paid $800 for my unit and when it can’t keep up my carrier unit will start up and bring the temperature down. It’s been a godsend, since I have a menopausal woman on the truck with me.

[@franknavarro9507]

@@clintonkirker5154 where can i find the USB cable , ? Thermo king dealer sale it ? I saw the plug connector on the fuel box isnot a regular standar usb ☹️

[@freedomfighter9046]

My tripac evolution 2017 it runs great all over the country except, Wyoming, part of Colorado, it smoke and engine popping with white smoke smells like unburnt diesel. Any ideas on what might be wrong with it thst will be so appreciated. Thx in advance

[@clintonkirker5154]

Check your glow plugs. It’s easy to do. All you need to do is remove them and connect them to a 12 volt source. If it doesn’t turn orange, it is defective.And since both areas mentioned are in the higher elevations, you may need to have your fuel adjusted.

[@freedomfighter9046]

@@clintonkirker5154 thank you for writing me back, i did change the glow plugs and the fuel pump and filter and the screen filter as well. I even toke it to thermo king for updating the software and no luck , tje crazy part is ,i be parked next to others in WYOMING and their ApU runs perfect. Its so crazy . You mentioned that i need to adjust the fuel how we do that is that something through the computer software?

[@clintonkirker5154]

@@freedomfighter9046 The best thing to do would be to find a Thermo King in the areas that you’re having trouble with the APU. That way they can duplicate the issue. Adjusting the fuel is not something that I would recommend unless you were certified/qualified to do it. When you are in higher elevations the APU requires less fuel, because there’s less oxygen.

[@freedomfighter9046]

@@clintonkirker5154 10.4 i think that will be the best idea thank you and stay safe out there.

[@alr9170]

Do you have to download something the get to the settings? I just huck it to my laptop it doesn't do nothing. And do you have to have internet?

[@clintonkirker5154]

You can try going to my computer and looking for a Drive E,F or G. If you go through all the comments there may be a program that you have to download, thanks to windows 10 and above. It worked fine on Windows 7. Unfortunately I never was able to get it to work on windows 10.

[@alr9170]

How do you get this program? I just got a laptop, I plugged the USB cord i got a screen, it's asking me for password.

[@clintonkirker5154]

Try 4444 that is the default password that thermoking installs.

[@alr9170]

@@clintonkirker5154it doesn't work. Whomever owns it before me probably change the password.

[@clintonkirker5154]

@@alr9170 you can try the link on doing a cold start below or take it to the dealer. Or you would need to contact the original owner. www.thermoking.com/content/dam/thermoking/documents/products/SB685-EVOLUTION%20Service-Tool%20R2.pdf

[@togrulletifzade]

What if I don't know my password for apu?

[@clintonkirker5154]

www.thermoking.com/content/dam/thermoking/documents/products/SB685-EVOLUTION%20Service-Tool%20R2.pdf

[@1ode2joy]

Awesome video sir, thanks for sharing. I only have an old Macbook laptop. Do you or does anyone know if it will work on Mac? I'm going to try it today but just curious. Thanks

[@clintonkirker5154]

1ode2joy I’m sorry, I just saw this message. I do not know if this program will work on a Mac.

[@Long.term.survival]

where did you get the software?

[@clintonkirker5154]

robert ethridge you just plug the usb cable into your computer open the correct drive and click on start.dat

[@frankgutierrez5460]

Where can I get the software or what is the name of software to troubleshoot apu units

[@clintonkirker5154]

frank Gutierrez you should have a usb cable coming out of the control box under the sleeper. If you are using windows 7.x or below, just plug the usb cable into your computer open the correct drive and click on start.dat

[@frankgutierrez5460]

Oh ok so once you connect the usb cable it opens the program directly ?

[@elidasaucedo7557]

Where can I find that cable you use to connect to the motherboard

[@clintonkirker5154]

It should already be attached to the black box that controls your apu. It’s just a USB cable

[@elidasaucedo7557]

Clinton Kirker Thank you for your reply my box didn’t have one

[@clintonkirker5154]

Elida Saucedo Unless they have changed something since 2016 the following link is the USB cable you would need www.walmart.com/ip/Link-Depot-USB-2-0-Type-A-to-Mini-B-Cable-15/15779597

[@Cybertrucker1]

I've got a 2018 tripac with Windows 10 and can't change the settings help plz?

[@clintonkirker5154]

Albert Hutchings from what I was told by somebody else, the program is not compatible with windows 10. I’m running windows 7 and have not had any trouble.

[@Cybertrucker1]

Clinton Kirker ok thanks I figured it out converting my CPU back to win 7 thanks

[@Cybertrucker1]

There is a service tool on tripac website you can download for windows 10

[@clintonkirker5154]

Albert Hutchings thanks for letting me know.

[@mxpx148]

I hooked up the USB and can bring up the menu, but all it does is read loading values and crash the exe file. Did you run into this at all?

[@clintonkirker5154]

windows 10 doesn't seem to like thermo king or Vice versa. It occasionally crashes on windows 7, but I just start the program over.

[@aaronpeddicord2944]

We're do you hook the USB up can't find anywhere

[@MrLure03]

mine doesn't have start.dat all it has is emc_ws which says when opened up tripac II webserver starting up and does nothing. 2 start files one a batch file and the other html. autorun setupinformation file and script file. tryed changing compatibility on every one and nothing works....

[@MrLure03]

had go to a thermo king dealer to get the program needed to get into the settings...after a few phone calls they finally decided to give it to me. lol but yeah its great to beable to change the settings your self.

[@clintonkirker5154]

MrLure03 I do apologize, I just saw this question. I’m glad you figured it out though.

[@BiggenSFFS]

@@MrLure03 any way you could email that program to me?

[@MrLure03]

@@BiggenSFFS if the file isnt too big to send thru yahoo i dont mind. Dont get why they dont give to drivers who own the apu.

[@MrLure03]

I dont know if it will work with older tri paks their might be different versions to the program from newer to older but cant hurt to try. Just dont mess anything up and blame me. Lol

[@frankgutierrez8176]

Where can I get the tri-pac program?

[@clintonkirker5154]

All I had to do was plug the USB cord into my computer. But I was using Windows 7. If you read the other comments, I believe you get it from Thermo King I have no idea if they charged or not.

[@clintonkirker5154]

@@Benni711 I made this video in 2017 you are not the first one to tell me this since then. At the time I purchased my apu from tk they were not forth coming with that information.

[@clintonkirker5154]

@@Benni711 That makes sense. I purchased my TK in April 2016. You would’ve thought as a customer they would’ve sent me an email or a snail mail letter informing me of this. It’s all good. I no longer have a TK APU. The truck that unit was installed on was destroyed in February 2019. My new truck has a carrier APU and other than the heating I am actually happier with this unit. It cools better in the summer and I have less issues with it freezing up.I do miss having their service net work, because carrier is nowhere near as large.

[@clintonkirker5154]

@@Benni711 So far it hasn’t been a problem. The only non-maintenance issue I have had with this unit was the generator. For some reason the mounts broke on it, but it was still under warranty. I Maintain a 1300 hour service interval for oil and filters plus an oil bypass filter. The oil still gets dark, but unlike most Diesel engine oil, it wipes right off leaving almost no soot on your hands. The reason for 1300 hours is because I change the oil every six months and that’s pretty much what I have on the engine at that time. I’m coming up on 6000 hours now. So the next service interval will be around late February or early March.

[@bmarionm]

Do the setting only work on windows and not Mac

[@donald1792]

anyone know if the 4444 password is still being used on new modals today?

[@clintonkirker5154]

It comes from the factory with that password. However if somebody else had access to it they could have changed it.

[@nonaxariis661]

Password is not working for me 4444 do you know another password thanks

[@supertrucker1356]

What happens when i delete all those files because I was trying to up date the news files?

[@clintonkirker5154]

I wouldn’t attempt to delete the files. But if you did they should be in your trashcan folder on your laptop. If you do delete the files I would assume that the APUWould still run, however you wouldn’t be able to adjust any of the settings. I’m just speculating.

[@supertrucker1356]

@@clintonkirker5154 i went one step further and confirmed permanent delete. I thought thats what I had to do to get the new software to upload from my computer to the apu.

[@clintonkirker5154]

I’m sorry, but your issue is beyond my knowledge. It would probably be best to contact Thermoking and find out what you need to do.

[@hkhtruckinginc8070]

Thank you for your video and you need to fix the RPM Engine RPM is too low You should set the Engine RPM to 2400

[@clintonkirker5154]

HKH TRUCKING INC I no longer have a thermo king apu. Thermo king states that the engine idle speed is to be around 1900 rpms. It’s not like a carrier apu, they idle at a much higher rpm.

[@mxpx148]

Ugh, guess I'm SOL with windows 11