2018 CAN AM MAVERICK X3 XRC 800 MILE REVIEW !!!

2018 CAN AM MAVERICK X3 XRC 800 MILE REVIEW !!!
MY TOOL KIT
Mens Large 22" Inch ACU Navy Digital Camo Duffel
amzn.to/2DSFzRz
Milwaukee Electric Tools Hex Impact Driver
amzn.to/2KCdW3E
Battery for Milwaukee M12 Milwaukee
amzn.to/2Eg3V5B
Oasser Air Compressor Portable Mini Air Inflator
amzn.to/2Z87moK
GOOLOO 1000A Peak 20800mAh Jump Starter
amzn.to/2ULSuxk
Gorilla 6035180 Black Tape
amzn.to/2EiPMES
Electrical Tape with Single Roll, Black
amzn.to/2GqUmBB
Cable Zip Ties Heavy Duty 12 Inch, Ultra Strong
amzn.to/2EgAMHr
Neiko 00239A Flexible Extension Bar Set
amzn.to/2EfZjw8
Titan Tools 21092 19mm 1/2
amzn.to/2DRdw4V
Irwin Tools 1840320 16-Piece Impact Series
amzn.to/2GqkWL2
2", 20' Tow Strap with Reinforced Loops 10,000 Pound Capacity
amzn.to/2DGIn0X
First Aid Kit
amzn.to/2Gq36rA
Rose Kuli 7" Portable Multipurpose MultiTools
amzn.to/2Fo1eyi
Bahco 396-LAP Laplander Folding Saw
amzn.to/2BzdHgh
Gerber Gorge Folding Shovel
amzn.to/2DI3Rua
Tooluxe 50002L Universal Tire Repair Kit
amzn.to/2DGIOZ9
Can Am Maverick X3 High Performance Drive V Belt
amzn.to/2DFSmDG
Kobalt 86759 Metric Mechanic's Tool Set with Case, 19-Piece
amzn.to/2Gq60wg
Morakniv Companion Fixed Blade Outdoor Knife
amzn.to/2E6kxPq
KFI Products ATV-SB Snatch Block
amzn.to/2EtGdTy
Rhino USA Tree Saver Winch Strap 3" x 8
amzn.to/2DkiIgv
Ultra Bright Handheld LED Flashlight
amzn.to/2FzrjKB
TORX T30
amzn.to/2Gz354N
Wire Stripper
amzn.to/2E545Ps
Hilitchi 100pcs 16-14 Gauge Butt Insulated Splice Terminals
amzn.to/2FxhQDE
ENJOY/LIKE/SUBSCRIBE
SUBSCRIBE / subscription_c. .
OUR FACEBOOK
/ performancemotorslindon
WEBSITE
www.pmutah.com/index.php
ROKBLOKS MUD FLAPS
rokblokz.com/index.html
UTAH VALLEY POWERSPORTS
utahvalleypowersports.com

[@bradyzegers807]

That thing is SICK! My buddy just got the exact 2019 model.

[@maverickx3838]

I have the exact 2019. Same color and love it. Great solid machine

[@pmutah]

For sure it's a great rig😎👍

[@528118389]

I had a real problem with my bead locks after going from a 30" Tensor tire to a 32" tensor. In two weeks the tire pressure would go from 15LB to 0LB. So I went back to my MTB racing days and found a product called Tireject Sealant. In my mountain biking days I used a similar product in my tires. After taking the wheel off the UTV and removing the valve stem I add the Tireject Sealant. Put the valve stem back in pumped up the tire to 25LB and moved the tire around and up and down to get the sealant over to the bead lock area. Mounted the wheel back up and drove around the block. The next day aired down to 15LB and in one month I lost 1/2LB of air from the tire. Plus it will seal any punture 3/8" in size on you tire.

[@John-hw3ds]

Thanks for that review! Good stuff and sweet machine you got there.

[@pmutah]

+John G John thanks for watching my review I really appreciate it👍

[@jayhammer4578]

I have a new 2018 X3 900ho that is great on the Michigan trails. The one thing I don't like is the way the front tires fling mud straight up and into the cab. Which wheel well extenstions work best? The Can Am Fender flares appear to be on the small side.

[@omafriedrichs2187]

hey branden if you look at the seat it does have a lower setting im big also and changed setting to the lower in my 2019 as soon as i got it spacer goes on top on the back bolts

[@charliex9er]

Thanks for the great review and especially the parts list.

[@pmutah]

charliex9er your welcome man. thanks for watching my videos👍

[@FloridaKeysPirate]

Great review ! Even though I watched your vid on cleaning the machine , I can’t get over how clean you’re able to keep it ! Looks brand new ! You should try removing the seat risers that are under the back half of the seat. They look to be close to two inches tall , and their removal may give you the extra room you’re looking for. Can’t believe it doesn’t have floor drains. I’ll probably make my own using something like a rod holder or through-hull for a boat. Would just have to figure a way to cap it off while riding. Only 3 more hours before I start my 11 hour drive from FL. to KY. to pick up my own XRC Turbo R ! Like I mentioned before , your videos have kept me occupied while waiting for my own X3 to get delivered , so Thank you ! And please keep the great content coming !

[@pmutah]

+Hank Slaght Hank that's awesome I'm super excited for you to get your new xrc you will absolutely love it. I've had no regrets nothing but fun. it's been some of the best times of my life over the last 5 months. On a side note I'm coming to Florida for 2 weeks in like 10 days and I really want to ride. what part of Florida do you live in and is there a place I could rent a machine and come riding with you. I was going to make a video about riding with you guys this year I want to ride other places in the United States.

[@FloridaKeysPirate]

Brandon Pierce That’d be awesome ! I’m pretty much right in the middle of the state , small town called Inverness. There’s an off road park about an hour north of me in Ocala called Hard Rock Off Road Park that’s supposed to be pretty good for around here. It’s open every day. There might be a place around there that rents them , but I haven’t looked online yet. What part of FL. will you be in ?

[@John-hw3ds]

Brandon Pierce, Ask here, they might help you out! facebook.com/groups/tampabayutvandatvriders/

[@pmutah]

Hank Slaght hank that would be awesome I'm going to be in Fort Lauderdale for one week and Cape Coral one week. but I'm not against driving to meet up and ride.👍

[@pmutah]

John G thanks John I'll do it

[@markursich3305]

I just installed the Rokbloks last night to include the V3 trailing arm flaps. It looks sick. Can't wait to get out again!

[@pmutah]

+Mark Ursich you're going to like him they do a good job of keeping all the mud and dirt off your machine👍

[@karzilla810]

I’m looking to get a side by side good video 👍

[@NoRegretsLifestyle]

Love your video's keep up the good work if you ever get to St George look me up lots of riding around here

[@pmutah]

+paul bates I'm glad you like the video. and I appreciate the support on the KZbin channel. I actually own some land in hurricane and plan on building a home down there in the next couple years. I plan on riding at least a couple times down there this year and I will look you up for sure.👍

[@dreamersridge729]

how does this unit do in the faster high speed and jumping scenarios. Is the suspension tuned for rock crawling or will it work on tracks and faster trails as well?

[@danpmatz]

Wow who would have thought shoveling snow could be soooo much fun lol awsome

[@pmutah]

+Daniel Matzendacher that's how I justify buying it. it can also plow my dealership keep the wife happy lol😄

[@matt2much]

Awesome montage! What music is playing during the montage?

[@angelferrari134]

I know this is a late question for the Light it’s basically a Baja design one like size wise on the Baja Designs one do the mounts go on the outside or inside the cage and also since you use the mirror holes for the mounts of the lights can you still have the mirrors?

[@56hueycobra]

Brandon: Thank You For a GREAT REVIEW On Your MAVERICK X3 XRC!!!

[@pmutah]

Bennie Mabe you're welcome man thanks for all the support on my channel. I really appreciate it👍

[@jeddaaah]

is there something close to the sandrails? i like this machine but i dont think the power is crazy enough for the dunes..

[@omriwahabi423]

hey Brandon how are you bud? I need your opinion. I just sold my rzr 900s and I wanna buy maverick base model with 120hp with the 172 kit option. my options were pro xp or the x3. I know both machines are awesome but I don't want to regret afterwards. I live in Israel so my rides are trail's and rock climbing, the position seating in the x3 is really good. my question is when you were climbing it was hard for you to see because of the seating position? and in general to a guy how comes from rzr I will be satisfied? thanks

[@Travel_fulltime]

What about horsepower and torque and ground clearance and inches of suspension and GPS and price? That would be good to mention

[@klr10410]

How did you get the half windshield to mount up with the intrusion bar?

[@eschenn1]

Polaris actually has a rear view camera and front facing camera for rock crawling, part of their Ride Command screen. They are very nice to use 👍🏽 and I honestly can't imagine driving a machine without DYNAMIX, I've been loving my turbo, corners and jumping are so much better, and the slow speed comfort for trail riding is untouchable, smoothest ride in the market right now. Thanks for the review by the way Brandon, keep the content coming 🤘🏽

[@pmutah]

+Evan Schendel Evan thanks for the comment. the cameras on the RZR sound awesome. something like that would be great on the Can-Am. and the Dynamics is really cool they did an awesome job on that. and I do not disagree with you I bet that machine has an awesome ride better than the Can-Am at least at low speed. I really like the RZR I guess I'm just a little disappointed because I like Polaris and I just wanted more from them. it's not like there's anything wrong with that machine I think it's a badass I just think I had higher expectations that's all. Thanks for the support on the channel I appreciate👍

[@danpmatz]

I just bought a Yxz about a month ago mostly because price and no belt but damn this is a great looking car. I think I will probably get one of these in the future man these are cool machines.

[@pmutah]

Daniel Matzendacher if you get an X3 you will not be disappointed. I love the yxz especially for the money it's a good machine. it's not quite as capable as an X3 but for the price you can get one for I think they're fun and very engaging to Drive👍

[@danpmatz]

Brandon Pierce i got an ss for just under 16 out the door i couldnt beat that price. But I agree with you everyone is going to be playing catch-up to this Can-Am and it should cause some great competition the future for side-by-sides is going to be very exciting!!!

[@pmutah]

Daniel Matzendacher yes I think canam is on top right now. but you can't beat that Yamaha for 16 Grand it's such a fun engaging machine definitely the best side-by-side for that price👍

[@DUNEATV]

I agree! I love my 2017 YXZ!

[@gvethunts5399]

Where did you get those blue flares?

[@eddieaguirre2845]

What light bar is that?

[@1gr8oil]

Great Video Brandon! How do you get it so clean after you ride? It looks AWESOME!

[@pmutah]

+wayne owen I do have a full detail shop at my disposal it's kind of not fair. but I like it to keep it clean and gassed up and ready for the next ride.👍

[@Chriskacin]

You mentioned a larger fuel tank. I was wondering without always putting the pedal to the floor how many miles do you typically get per tank?

[@pmutah]

Chris Kacin that's a good question I had to figure this out when I went to Baja Mexico for the 1000 the machine gets about 12 miles to gallon and you can get close to a hundred thirty miles to a tank

[@philipsoanes6894]

You can lower the seat when you open your door I saw was in the higher setting

[@pmutah]

+Philip Soanes thanks Phil yeah I realized this morning that I can lower the seat.👍

[@kellywhitman2867]

Nice video. Thanks

[@pmutah]

+Kelly Whitman you're welcome👍

[@NoRegretsLifestyle]

why have you removed your front rock guards. I notice them off in this video.

[@pmutah]

+paul bates I had to take off the front guards to use the plow they got in the way of the mounting bracket. I plan on putting them back on in the springtime.

[@martinalencastro9885]

How did you make that wimdshield work

[@collincuming9845]

Nice review! So in your opinion what machine is more bang for your buck the new ‘18 xrs or the ‘18xrc? Is there that big of a difference?

[@pmutah]

The new black and red XRS has the Smart Lock system so there's not too much of a difference between the XRS and the xrc. it's basically just the extra guards and the winch and the aluminum roof at that point. I'd be happy with both of them👍

[@jt40sti]

My question Brandon is your choice of tires, you seem to stick to one tire for all the season or do you have other tires that you use...

[@pmutah]

+JT 40STI_at_Johnny-IDPA I do have another set of big horns. but I ride so many different types of terrain year-round that I need an all-around tire and I like the Maxxis Liberty👍

[@BrettCrowther]

How many miles can you expect to get out of this?

[@MrCarpediempilot]

I am pretty sure you can lower the seat. You just move it to the lower holes. Thank for the video.

[@pmutah]

Carpe Diem Flyer yes somebody else has mentioned that to you I will look that the morning and see if I can get it lower. thanks for watching the video👍

[@jaridking5948]

Brandon, I’m love the RC but my GoPro is catching a lot of vibration. Where can I find your camera setup? From mounts to your recording settings?

[@pmutah]

Jarid King you can't use the stock GoPro cases you can order a good case off of Amazon it'll make it a lot better👍

[@markursich3305]

Greeeeat review Brandon! Hey when you get a moment, could you post up a link for your windshield that you went with. I'm looking to put one on (with the mods like you did). Thanks!

[@pmutah]

+Mark Ursich here you go Mark thanks again for all the support and watching my videos👍

[@pmutah]

+Mark Ursich amzn.to/2E4tZj2

[@GABRIELM29]

Good review Brandon one qtn how good is the smart lok I'm getting the 2018 x3 max but can't find anything on it how dose it help on the different trails

[@pmutah]

+gabriel montiel thanks for the comment the Smart Lock is amazing it does significantly better than the old visco-lok system. you will love it there's tons of different settings you can do full lock ,Rock, Trail it does a great job👍

[@davidpaulin]

while you were talking about seat height i just noticed that your seats are in the high position .. you can lower them!

[@pmutah]

+davidpaulin yes I noticed that too. I am going to lower them👍

[@glamisfuntopia]

Cool video and I watched the whole thing. It a awesome machine and yes can am seat is better than rzr.

[@pmutah]

+Funtopia Videos thanks man I really appreciate it. I'm glad you liked it. I love the xrc it's been really fun machine can't wait to go out and ride again👍

[@deathdealer608]

Hey brandon, did you use the rokblokz light bar mounts and did you have to cut the roof at all? Great videos! Keep it up!

[@pmutah]

jimmy cerullo I did use the Rokblokz light bar mounts and I did not have to cut anything.👍

[@deathdealer608]

Brandon Pierce, awesome! Thanks brandon!

[@pmutah]

jimmy cerullo no problem buddy😎

[@gustavocancel]

Brandon, just blew a front sway bar link. Have you had or heard of people having issues with these? I’m at 540 miles currently. Just curious.

[@pmutah]

Joel Cancel yeah man I have. what usually happens is there not tightened from the factory and people don't realize it. and then you end up breaking them. make sure when you get your new one that you check all your sway bar links😎👍

[@pyalong]

Great Review...as I'm awaiting delivery of my RC it's good to know what to expect and it sounds like good times.. Just wondering if your screen is a genuine Can am as I thought they could not be fitted with the intrusion bar on. Keep up the good work !

[@pmutah]

+pyalong thanks for the comment and I appreciate the support on the channel. it is the factory Can-Am windshield and all I did was zip tie the two side mounts to the roll cage check out my Tire and Wheel video it answers this question👍

[@pyalong]

Sweet.....Brandon do you know if your RS also has that Junction box underneath the centre console or is it new on the RC ? Keep up the good work mate and I look forward to your next post.....

[@pmutah]

pyalong yes it does have a junction box it's really nice for doing accessories. thanks again for all the support on my KZbin channel👍

[@tristanhipps604]

its interesting in your rock crawling video the first thing you said is that you cant see out of it and you had to get spotted on every little thing. thats not an issue for you? did you ever dig the front bumper in the dunes?

[@pmutah]

Tristan Hipps it is a little hard to place where the front tire is when you're rock crawling that was one of the first times I drove the machine. no the front end is awesome in the dunes that machine is a is amazing out there.

[@dmitrysurkov2012]

Hi Brandon. Would you please clarify if the intrusion bars are removable? Have you considered installing can am windshield with wiper? Will the bars or the stock xrc roof interfere when installing the original windshield? Your opinion will be appreciated. I ordered this model and I decided I want to install the windshield with wiper and upper door panels in case I run into mud at some point...

[@pmutah]

You can remove the intrusion bars and if you're doing a full windshield with a wiper you do need to change the roof also😎👍

[@dmitrysurkov2012]

Thank you. Yes, I want to do the full one. You sure the stock roof will have to go? A little unexpected:) Though it looks like this guy managed to leave his roof in place... m.kzbin.info/www/bejne/oJ2ceoGBjLmIZ5Y

[@charlesdanza7557]

Do you have a video for setting up suppenion, ride height, ect??? I have a X3 XRS and need some pointers... Thanks

[@pmutah]

Charles Danza search KZbin for Can-Am X3 Fox pro tune those are the settings that I use👍

[@charlesdanza7557]

Brandon Pierce thanks, I'll look it up. Also thanks for the RC review, I just ordered one....

[@ryankostolni9556]

Hi, I love that lightbar. Who makes it?

[@jeffex72]

Ryan Kostolni everyone makes it

[@Benno1508]

I am thinking about getting the X3 900 HO! I think it's cooler than the RZR.

[@pmutah]

The new X3 900 HO looks pretty awesome I'm going to try to get one of these two review here in a week or so. it seems like a great value👍

[@cabman8]

Brandon, I just came home from my 2nd ride in my RS and it is an AWESOME ride, but it is really squeaking and making noise with the slightest use of suspension. Have you experienced this? Forums talk about dry bushings and grommets that need some lubricant. Any feedback on this? Also, what tire pressure(s) are you using in the different terrains?

[@pmutah]

That's awesome I hope you enjoy your XRS. there's a few things that I would check. definitely Lube the mounting points from the shocks to the frame and the arms also make sure uou check your sway bar links I feel like all the new machines have loose sway bar links. I usually run 10 psi with the Maxxis Liberty tires the bighorns are going to have to be more careful and run higher pressure more like 15 to 18.😎👍

[@cabman8]

@@pmutah Thanks for the quick response! Appreciate your opinion on the tire PSI. I have carefully lubed all of the zerts and sprayed silicone on every bushing or pivot point I could find. Would you go so far as removing all pivoting mounting bolts and applying a thin layer of lithium grease on the inside before reconnecting? When I push down on the front bumper it squeaks like crazy which it didn't do prior to hitting it hard this weekend.

[@cabman8]

I checked all of my suspension and guess what...the driver's side sway bar was "flopping" loose, both connection points. Haven't driven it yet but I know this was making most of my racket. You were spot on, thanks!!

[@cabman8]

When you are using your video camera mounted on the car do you have it in a waterproof case to cut cut down on the wind noise? Or?

[@pierredelecto139]

Great video. Who makes the mount you are using for the front light bar?

[@pmutah]

yes here is the link rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338101947&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FMaverick-X3-X-RS-Light-Bar-Bracket-Light-Pods-LED-lightbar-mount-ROKBLOKZ%2F192131826709%3Fhash%3Ditem2cbbf30415%3Ag%3A6xkAAOSwopRYeV5y%26vxp%3Dmtr

[@sixsigma6838]

Brandon, are you certain this is the mount you are using. This works with the OEM X3 XRC Aluminum roof?

[@pmutah]

Waleed yes those are the mounts that I have in my machine so if you want it mounted in the same position that I have mine they will work

[@soredem]

does the junction box apply to the 120 hp model?

[@pmutah]

Sorry man I am not sure

[@SteveSmith-wl8yq]

Brandon, The seat is adjustable down/lower. This is a factory design...not a hack job...you only have to move the rear bolt spacer to above the seat rail mount (spacer and nut together..rail on bottom) and move the front bolt to the lower hole. I've already accomplished this adjustment on my 2018 X3. I'm pretty surprised you are not aware of this simple seat height adjustment/design. I hope this helps...

[@pmutah]

+Steve Smith thanks Steve maybe I was aware of that. I just didn't realize I didn't have mine in the lower setting. I'm going to work on this today and see if I like it better👍

[@SteveSmith-wl8yq]

I loved it...I think you will like it a lot better. Your vision is only slightly impacted, but I didn't find it an issue.

[@pmutah]

thanks steve👍

[@mosheyosef3496]

So which one you recommend me I'm in the market the xrc or xrs

[@pmutah]

I like them both. if you're getting an XRS just make sure it's the new one with the Smart Lock system. if you can afford the xrc it's a little more money but it comes pretty well equipped with a lot of nice accessories.👍

[@SVTsupercharged]

Can it rock climb or drive through thick mud?

[@pmutah]

SVTsupercharged yes that's what it's made for👍

[@randywilliams4325]

Another You tube video shows how to install a tablet into the center top of the dash with a Can Am factory tablet bracket kit.You could run a camera for rock crawling and run into the tablet via Bluetooth .There are also many navigation apps that can be loaded into the tablet .Most of them have a built in gps antenna.The rear brake line should have been routed through the swing arms.The x3 looks like a real race car and not a reworked Yamaha Rhino.Some of the smaller cars have cvt transmissions that use a metal belt in oil.The rubber belt should go away .I can’t afford 1 but I got to drive them at a Bombardier test drive event.An amazing piece of equipment as built.The Donaldson air filters are standard equipment on a lot of heavy construction equipment .If you change that please do oil analysis before and after .

[@pmutah]

+Randy Williams Randy thanks for the comment that's some good information I'm going to look into that tablet and tablet Mount and Camera. I will do an oil change video and do an analysis. thanks for watching the video I really appreciate it👍

[@jamespaolicelli2372]

Hey Brandon I have the tablet adapter. It works well plus it gives you an extra glove box. I also installed a rear view camera since it's impossible to see behind you.

[@pmutah]

James Paolicelli I have seen those James. maybe I'll have to get me one sounds like a good idea👍

[@ronmondgock9440]

Hey Brandon....Where do I get them blue mud flaps...thanks....Ron

[@pmutah]

here is the link ron. let me know if you need anything else rokblokz.com/products/can-am-maverick-x3-x-ds-x-rs-mud-flaps-fr?variant=6404163305515

[@angelferrari134]

One question I know this is late but how would you connect the lightbar and the mirrors

[@pmutah]

The bolts go through the mirrors and the light bar bracket at the same time

[@angelferrari134]

Brandon Pierce ok thanks

[@JauntJunkies]

Super nice rig. So much nicer than my Wildcat X. Someday...

[@pmutah]

Yeah the Can-Am Maverick X RC is badass😎👍

[@JauntJunkies]

Brandon Pierce would you recommend the the 120 hp. The budget does not allow for the 170hp.

[@berryharry1304]

where the landscape did you take a trip?

[@pmutah]

+berry harry the riding video is from several different places that I wrote over the last few months

[@DixieNormas]

What windshield is that and did you like it?

[@pmutah]

I used the Can-Am OEM windshield and yes I do like it. amzn.to/2NkJd7q

[@absconderie5588]

I got one of these brand new today. I let my brother in law drive it and he flipped it within 5 minutes. It only had 9 miles on it. I was freakin pissed.

[@stephen5665]

I have learned my lesson on letting people use or ride my toys. They will break and not care. So from now on when I have something expensive and people want to use it or ride it, I tell them to go buy their own. No one will care for YOUR things.

[@marnielarocque9412]

gullwing doors would probably be the best door never pop open unless rolled and never get bent if left open going ahead or backwards

[@pmutah]

Marnie Larocque thanks for the comment Goldwing doors would be pretty awesome👍

[@AltaEnterprisesInc]

What are you all paying for your RCs with the Turbo R?

[@pmutah]

AltaEnterprisesInc I think they're going pretty close to MSRP maybe 500 or a thousand bucks off they are still in pretty high demand.👍

[@stevenbooth9758]

pull your spacers from the back of the seats brackets.

[@pmutah]

+Steven Booth thanks Steve I just noticed I still have them in I'm going to pull them out and lower the seat I appreciate it👍

[@mudchamp2139]

the seats do go lower there are holes in the front of the seat so that you could drop the front mount 2 inches lower!!!!

[@mudchamp2139]

the seat frame itself where it mounts to the crossbar

[@pmutah]

+mud champ I think you are right I will work on it in the morning. I would like it a little lower thanks man👍

[@Owneddd1]

it defiantly drops 2 inchs

[@eddieespinoza3500]

Do you like the 14 inch wheel on 32 inch tire or 15 inch wheel on 32 inch tire

[@pmutah]

I would probably do a 15 inch wheel with a 32 inch tire it's the best overall setup😎👍

[@eddieespinoza3500]

Brandon do you know if the new Maverick is going to have a DCT transmission have you heard anything

[@eddieespinoza3500]

The 2020 Maverick I wonder if it's going to have the DCT transmission I'm trying to figure it out cuz I can get a good deal on a 18 right now and I'm wondering if I should just wait

[@URBANAMERICANTAC]

Man, I got to tell yah. I was all in on the can am but that new RS1 and it’s price have me thinking.

[@pmutah]

+URBAN AMERICAN TACTICOOL I agree with you man it's very intriguing 14000 bucks a 110-horse decent suspension it sounds pretty good👍

[@eschenn1]

The RS1 is awesome dude! Ronnie Anderson just won 1st place at WORCS in a stock RS1 this weekend vs turbo machines. Insane!

[@SVTsupercharged]

Rs1 is definitely the better bang for your buck.

[@pmutah]

SVTsupercharged the rs1 is half price and you would have a lot of fun with it but I couldn't give up my X3 XRC👍

[@SVTsupercharged]

Brandon Pierce I couldn’t justify spending more than 30 grand on a vehicle that gets driven more than a few times a year.

[@user-qh7hb3jr3f]

Where can I buy the mud tool?

[@pmutah]

Here's the link amzn.to/2L6IcyK

[@bassettfamily9530]

So what's the price on this with the way it sits?

[@pmutah]

Bassett Family there around 28000

[@bikeracr]

here in Canada they are $35,399 plus Tax before extra's and the X3 XRS 4 seater is the same price,lol

[@gmax876]

You have a snow plow for it! BAD ASS!

[@pmutah]

Yeah man it's cool how easy it is to put it on👍

[@JauntJunkies]

Didn’t realize you were located in Itah County. Hello from a fello Utah County you tuber.

[@pmutah]

It's surprising how many KZbinrs are in Utah. it looks like you're almost at a thousand Subs I'll give you one more😎👍

[@JauntJunkies]

Brandon Pierce thanks. Love your videos keep it up.

[@stevederbin9947]

Where did you get the windshield?

[@pmutah]

It's made by Canam should be able to get it at any Can-Am dealer

[@stevederbin9947]

@@pmutah Thanks. The dealer told me there was no windshield available due to the intrusion bars.

[@karlarivera9225]

How you put you windshield with intrusion bars

[@stevederbin3502]

@@karlarivera9225 I had to remove my intrusion bars to install a full windshield. Worth it!!

[@d_ressu]

Take a shot everytime he says machine! Cool video tho :D

[@mbrown1519]

Most Everything you ask for is on Polaris S Tubo

[@trevin1691]

Come to King of Hammers in Johnson Valley for a different kind of challenge Not every beadlock looses air😎

[@douglowenthal1320]

Hey Brandon, I have this xrc Turbo R in the thing has a governor on it do you have any idea what that's all about. I know all about the sport keys to sport mode and all that other stuff because I have another Can-Am XDS right now my XDS will kick ass on the xrc the xrc only goes 42 miles an hour I called BRP and they said you need to go faster than 45 I couldn't believe it this is a representative for BRP. I'm going with razor next time can't stand the idiots in this industry.

[@pmutah]

Doug Sorry I don't quite understand your question. my xrc will do 85 miles an hour are you saying that you're xrc only does 42?

[@douglowenthal1320]

It acts like the learning key is all there is no Snappy acceleration I thought on this model maybe after 10 hours the ignition would reset. Called dealerships nobody knows. Thanks Brandon love you videos

[@wood2hoz4]

👍🏼

[@pmutah]

+Moto-B thanks buddy

[@justinkeraitis423]

Only downside in my opinion is how wide it is

[@pmutah]

Justin Keraitis thanks for the comment. I feel like 9 out of 10 times it's a pro not a con. I love how wide and stable it is

[@justin.rodgers]

They make a 64 and 72 wide x3

[@alvaromartinezagmilmoro8683]

I got 5300 miles in my 35 inches tire pure Baja riding

[@pmutah]

Alvaro Martinez nice man👍

[@jl644]

The door, the way it opens, is the only thing that i don't like.. I don't know why they did it that way.. When i have a chance to have one, I'll change it lol

[@pmutah]

Yes I wish the door open the other way. it's not a big deal just something on the wish list👍

[@rockinmranch6895]

The only thing I hate about it is that robin egg blue...... Im thinking like a desert tan!

[@pmutah]

Not me man I love the blue. thanks for watching my video😎👍

[@atlnative8222]

The blue is the best part of the machine it looks so nice

[@eddys.razorxp6445]

After the wish list you made me think the machine is lagging in some way. These are offroad machines man not sport cars. I was so sold on this now im so less sold on it. i have polaris razor xp 4 1000 and love it. Was thinking of adding this but not so sure now. Tires lose air?? My tires do not lose air never ever have to fill them, ever. I know you will say you r being picky but for 25k it sounds like the car does not satisfy you even though you say it does. You r review seems to point in other direction. You say you wish the steering had better modes of input, wish tires held air, you wish you could see tires when rock crawling need cameras, you wish the seating position was better, wishing could remove the seats easier, wish you didn't blow a belt,......etc.. doesn't sound like a good machine. Just my opinion after listening to this review.

[@owlgamer1780]

Only downside. I don’t own one

[@pmutah]

+owl gamer goals👍

[@vinmatrix76]

A couple things that I don’t like about these, which never gets mentioned in any video. All of the plastic body work is sharp as hell, you will cut yourself on this stuff. They really need to finish the edges on the plastic way better. Another thing that is really stupid and shouldn’t be an issue but is, the shifter almost touches the center console, to the point where it can grab your fingers and even pinch them if your not paying attention. This is an engineering issue and should have been fixed in the design phase. Yes the machine is very capable, but the fit and finish is just terrible. If you never have to touch or drive one, it’s looks great, but if you own one you really have to pay attention to certain things to keep from actually hurting yourself. It’s one thing to get hurt playing with these machines, but it’s a whole nother to get cut and pinched just trying to drive and maintain it.

[@freddyfrediere8275]

A-OY

[@pmutah]

+Freddy Frédière 👍

[@freddyfrediere8275]

A-WA-KA

[@pmutah]

+Freddy Frédière 👍

[@bobbiebigg3]

Loose the fuckin music

[@schumif1champ]

What light bar is that?

[@ryanmakurat3769]

How did you secure the front windshield with the intrusion bars?

[@pmutah]

Ryan Makurat do you use the factory clips that came with on the bottom part of the windshield and then to zip ties on each side let it rest against the intrusion bar it works great thanks