In this video I will show you how to tighten the chain on a 2018 Kawasaki H2 SX SE. the same procedure can be used for the 18 h2 sx ,19 and 20 h2 sx se or sx se plus
Пікірлер: 23
@adamstark62632 жыл бұрын
Got a real easy solution for you all. But a 1/2 inch drive wrench and 10mm allen socket to go with it, and an adjustable C spanner. Leave everything on the bike, but get the rear wheel off the floor. Undue the 2 Allen screws at the back of the swing arm and use the C spanner to tighten the chain. Then when happy, tighten the 2 screws back up. Procedure can be done within 5 mins. Cheers 👍
@rover51768 ай бұрын
Nice video Bud. I was curious as waiting for my H2 get ready for collection and saw in the manual that have no information about adjusting the chain, only says to take to a dealer - lol. It is exactly like a multistrada I had few years ago, an eccentric hub. A C spanner would do better bro, and it may not require to take everything off. Good video, appreciated your time.
@Steve_Solomon2 жыл бұрын
Thanks for showing a method for tightening the chain! I look forward to trying this out
@sracer39462 жыл бұрын
You're welcome and I hope it works out for you as it worked for me. Don't forget to check the end play of the rear bearings. Mine were shot at the last rear tire change. Awaiting warranty parts to come in and repair the bearing assembly. It had 2 inches of side to side play in it when I checked it.
@Steve_Solomon2 жыл бұрын
Did this today exactly as shown and it worked fantastic, great video bro!
@sracer39462 жыл бұрын
Thank you. I'm glad it helped
@hawkslayers110 ай бұрын
Thank you for the video
@Batmanmotorcyclerider Жыл бұрын
Thank you, I just bought a 2022 H2 SX SE and was looking to find the chain adjustment for future maintenance.
@wolfson93083 жыл бұрын
Hello, i never had to remove the wheel for that procedure. Just used a old tool from a Z750 that was for adjust the suspension.
@Nekminute3 жыл бұрын
This is such an easy job on a Superduke 1290, loosen one bolt and tighten with tool out your tool kit you also have lines for reference on play, no need to remove a wheel and what not.
@stellaracrobat9 ай бұрын
No need on SX either - same procedure - just the hook spanner needed
@strider01063 жыл бұрын
After watching your video I've decided to buy the cheap Kawasaki chain tightening tool so I wouldn't have to remove the exhaust and wheel just to tighten the chain. What a hassle it is doing it this way.
@sracer39463 жыл бұрын
I did buy the tool, but I needed to ride it before the tool arrived so in the absence of the correct tool you can still ride your bike.
@randygreer5491Ай бұрын
Buy a KTM Spanner wrench, works for me.
@sufeeb Жыл бұрын
I always torque the pinchbolts to spec...just to be sure.
@yourivleghert83652 күн бұрын
On E-bay these specific tools are sold for like 20$ max. Better to buy those then the outragious expensive chain adjustment tool from Kawasaki or doing this shit that in the end might damage something.
@Maree_Customs2 жыл бұрын
You don't have to remove the wheel or exhaust for this...
@sracer39462 жыл бұрын
Yes I got the tool now and it's much easier but at that time I need to get the chain tightened asap.
@kiddcisco3 жыл бұрын
why not used a fixed camera , works alot better
@sracer39463 жыл бұрын
Next time
@richardwoodhouse83973 ай бұрын
Der
@tkdruss693 жыл бұрын
Sorry but why would you hit it with a hammer🤷♂️🤦♂️, if Yr going to have a bike like this, like I do, get the correct tool!
@sracer39463 жыл бұрын
Not hard enough to damage it. It didn't take much to move it.