It's ridiculous how difficult they make it for people to do simple fixes such as changing a fucking bulb.
@antikommunistischaktion2 ай бұрын
You don't need to take the housing out. You can change it by moving the fuse box or if you have small hands you don't even need to do that.
@MrDavesbox1Ай бұрын
@@antikommunistischaktion this is bullshit...wife has this car....never again......im into this mess now
@doversucks6 ай бұрын
I just did this in the cold, on my driveway. Such an unnecessary hassle but couldn’t have done it without this vid
@MCPHILL6 ай бұрын
I'm glad you got it done👍
@pmpsklz5 ай бұрын
Thank you for posting this video! You explained the process PERFECTLY and I was able to change my headlights with no problems!
@MCPHILL5 ай бұрын
Glad to hear👍
@christinaellison3513 ай бұрын
I really earned my "KZbin certified mechanic" today. Thank you 😅
@MCPHILL3 ай бұрын
just for some headlights lol good job
@MsLaunt2 ай бұрын
thankful for this video because it helped me save over $1k. the dealership tried to charge me so much for this!!! 🎉🎉🎉🎉
@Jamespercy711 Жыл бұрын
Finally a proper video that shows how to remove everything in order to get to the headlight bulb. This car is extreamly annoying to get to anything because most cars u just pop hood unscrew some bolts and your all set.
@MCPHILL Жыл бұрын
Glad I could help
@frobber150 Жыл бұрын
The Driver side bulb placement is a design flaw. Going into the wheel well, or even removing the bumper are ridiculous for changing a bulb.
@robincork49933 жыл бұрын
In my older Elantras, it wasn't near so ridiculous to change simple bulbs. I have small fingers, but the way they design these cars anymore it makes you want to take it in just to save yourself the trouble, almost. Or maybe that's just me. Thanks for this video! It is great!
@MCPHILL3 жыл бұрын
Ya I think they do that so they make more money off of you lol
@stevenweiss21482 жыл бұрын
yes what a pain. think i will take it in
@vmt88 Жыл бұрын
I'm sure that's EXACTLY their intent. This is BS😡😡😡😡😡
@Zapados Жыл бұрын
Annoying for sure but worth doing and saving the 80 bucks
@MCPHILL Жыл бұрын
No kidding
@briandavis21793 жыл бұрын
Perfect tutorial for my 2019 Elantra. Thank you!
@eb1212092 жыл бұрын
I was actually able to get the bulbs in and out without all the other work. Driver side is a very very tight fit. My hand now looks like I got in a fight with a cat.
@MCPHILL2 жыл бұрын
Lol I can only imagine
@latonyamiller41162 жыл бұрын
Can you please tell me whether or not there’s a specific direction to actually get the bulb out? I’ve unclipped it but the bulb won’t come out!! please help
@MCPHILL2 жыл бұрын
@@latonyamiller4116 it's counter clockwise about a 1/4 turn then wiggle out
Thank you for this video, I plan on doing this with my elantra, I have the exact same model and colour. I'm a beginner and didn't know how to do these features on the headlights as I always leave it on auto. Thank you so much for this.
@MCPHILL2 жыл бұрын
No problem glad I could help
@blaiseshipp5463 жыл бұрын
bro love the vid and props for only using one hand looks great
@ralphlongo19754 жыл бұрын
Oh man, I'm so sorry you didn't see my video on this. You can do it through the fender well without taking the whole thing out, and it is really stupid that this is an issue at all. Total fail on Hyundai's part.
@jeansandmyshirt2 жыл бұрын
Where's your video
@ralphlongo19752 жыл бұрын
@@jeansandmyshirt it's here kzbin.info/www/bejne/q4CZfadueLKUmdE
@anayaxo90074 ай бұрын
hyundai is the worst make in the entire world.
@icecoldnut51524 күн бұрын
@@anayaxo9007 go give a jeep a whirl and see if you feel the same way
@anayaxo90073 күн бұрын
@@icecoldnut5152 Hyundai still sucks lmao.
@ericroman2724 Жыл бұрын
Hey friend just wanted to say thanks for your video I just changed out the light bulbs on my girlfriend's car I did see the one that they took the wheels out to get to it from the wheel well and yah that looked a lot more aggravating than what I needed to be but I prefer your way thanks again
@MCPHILL Жыл бұрын
Thank you, I appreciate it
@Delphis3 жыл бұрын
Really good instructions. I only deviated from this in that I had a jack to lift the car on either side while I worked in the wheel wells and under the bumper just to give myself a bit more space to work in. Also the bumper as well as the headlights came off in one thing so I don't know if I missed something of that but I just disconnected the lower grey connectors and just moved the whole lot over to the grass in my front yard to work on replacing the bulbs
@mcmlxviii93222 жыл бұрын
I don't own an Elantra but this video is helpful nonetheless. I have Hyundai Accent 2019 and it's almost impossible to remove/install bulbs on the driver side so I had to do it this way. Thanks!!!!
@MCPHILL2 жыл бұрын
Glad I could help
@MrBitch3213 жыл бұрын
Thanks for the vid. I did the difficult way like you and got it done. Think the most annoying part was getting the bumper back on.
@MCPHILL3 жыл бұрын
I did it probably 5 different times and could get it done in about 25 min
@hasanalothman272 жыл бұрын
the vid took so long but i was super helpful thank you a lot Mcphill now I know the green cable is + and I need the tool to remove the clips* i can't stress how much I'm thankful thaaaaaaaaaaaaaaaaaaaaaaaaanks aloooot
@thegrizzlyoldtiger2 жыл бұрын
Thanks for this video, you did a great job! I started to go thru wheel well as some people have suggested but it was still too tight to turn the bulb inside its case to remove it. So I did it this way! So again thank you!!!
@Beps128 Жыл бұрын
The same thing happened to me. I'm going to try jacking it up and taking the wheel off to get more of the wheel well off before I try this.
@Cochi313 Жыл бұрын
I found it easier to take the wheels off and pull back the plastic and stick my hand in, takes less time but its slightly heavier work.
@LORDRA1DEN4 жыл бұрын
Great video, not a lot of videos on this car. My wife has this car and if it were mine I'd start tearing everything off to see how it goes together again, but she'd get pissed. I'm not going to do it this way, but good to know. You can also do the bulbs going through the wheel well and some people with tiny hands can actually do it from the top. I can get the passenger side one out from the top going slowly, but not the driver's side. Now I just need to figure out the reverse lights to put brighter ones in.
@MCPHILL4 жыл бұрын
Ya same here I'm also trying to find a good replacement for the drl next to the headlight
@LORDRA1DEN4 жыл бұрын
@@MCPHILL We used this for the DRL www.amazon.com/gp/product/B07NQ8YYQJ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
@thecentralman4 жыл бұрын
I didn't have to take off the bumper, just forced my poor hand into a tiny crack and boom, done!
@jamesjames17164 жыл бұрын
Great job and video! Thanks a lot.
@MCPHILL4 жыл бұрын
Thanks, glad you enjoyed
@jennifercalatayud9896 ай бұрын
Very good teacher. Thanks for this video!
@MCPHILL6 ай бұрын
I greatly appreciate that. Thank you
@pejodial2 жыл бұрын
The Best of the Best in video explain how change the bulb in Hyundai elantra 2020 . I dont will imagine desmont the bumper for that.I have this model.
@lisabagnasco36602 жыл бұрын
Taking half the car apart to change a stinking bulb 💡 🤣🤣🤣
@benmartinez11038 ай бұрын
This video was awesome it’s just unfortunate you gotta go through all this trouble just change a few bulbs. I have a 2020 ELANTRA and want to change the headlights but so much drama to do it.
@MCPHILL8 ай бұрын
There is another way to do it if you have very small hands through the wheel well
@gerardosoto4043 жыл бұрын
Wow, tengo uno del 2019, así que me chave, ya tengo las luces así que a ver el vídeo nuevamente y aventurar que todo quede igual. 😲
@itsrobyy4 жыл бұрын
I just got a 2019 Elantra sel and your videos have been a lifesaver lol. I just ordered some leds for the headlights similar to the ones you just installed. Does the external driver get too hot inside the dust cover? Should I leave the dust cover off?
@MCPHILL4 жыл бұрын
Nope no issues at all
@JonezBBQ4 күн бұрын
Unbelievable that you have to go through all this just to change a headlight...
@MCPHILL4 күн бұрын
@@JonezBBQ ya, no kidding
@nightstaber20104 жыл бұрын
I went in through tire wheel well, took less then 5 minutes
@MCPHILL4 жыл бұрын
Ya there are a few ways of doing it
@nelm23 жыл бұрын
Can you give more info.. did u went thru the fender?
@shakeemsuarez97373 жыл бұрын
Did you have to unclip the bulb before replacing or do you just turn and pull?
@thegrizzlyoldtiger2 жыл бұрын
Yeah I started out going thru the wheel well myself but on the 2019 we now have my hand still wouldn’t fit in there well enough to turn the bulb so had to do it this way! We had a 2016 and I told my wife what a pain this was but said watch they’ll find a way to make it even harder and sure enough they did now the unibody is in the way and there is even less room, SMH! I bet the mechs at dealerships want to beat the hell out of the engineer who designed this, I know I do and I only have to do it once in a great while!
@MCPHILL2 жыл бұрын
Ya they sure don't make it convenient
@micway712 жыл бұрын
Jesus what a royal pain in the ass!! I commend and appreciate your patience! This helps me some as I do my 2022 N line. Helps as far as the connections and what the setup will be like or similar too. I believe I’m fortunate enough to get my hands down to finish the job. Take that nice Skagen timepiece off before your scratch it.
@gavingarcia75043 ай бұрын
Such an educational video 🙌
@Grumpyolegrunt Жыл бұрын
Awesome that really made it easy thank you!😊
@MCPHILL Жыл бұрын
Glad I could help
@Tofer18010 ай бұрын
Great video thanks
@jeffedmondson4929 Жыл бұрын
What a great video!
@MCPHILL Жыл бұрын
Thank you, I appreciate it
@billcombs41213 жыл бұрын
Just take fuse box loose, move it back a couple inches. Much easier. Just di it this way tonight.
@MCPHILL3 жыл бұрын
Sweet glad you found a better way, it never hurts to try a different approach
@valeriyzuyev9949Ай бұрын
Thank you very much
@snakeius Жыл бұрын
Thank You so much for the information, btw what light bulb P/N and brand did you get?? what did you ended up using?
@MCPHILL Жыл бұрын
Unfortunately, they are no longer selling them. Just look up the highest-rated ones on amazon
@omarmorales95234 жыл бұрын
I added those sylvania 1157 led's before watching this video and now I have those warning lights. I'm now in the process of buying the ones u did for the DTR lights. How are they doing so far? As well as your led 9005's?
@MCPHILL4 жыл бұрын
I like them so far I do want to switch to the cool white though
@peterlindvall7671 Жыл бұрын
What is the wire nut with the white wire for? Also, use a cable-tie for the little LED box, so it can't come in contact with the fan.
@MCPHILL Жыл бұрын
The wire nut was when I was testing some lights
@MsLaunt3 ай бұрын
literally taking my hyundai 2020 up to the dealership today because i'm having problems with my " daytime running light " on the right side. got new lights & it's still not operating. the lady at a car store told me my light connector isn't connecting properly
@SpaMio-vv4nq4 жыл бұрын
I just picked up a 2020 Thursday evening. Looking to do a LED upgrade as well. Did you get any error code for this swap? Crossing my fingers their wasn't any.
@MCPHILL4 жыл бұрын
Yes make sure when you get led bulbs you get canbus leds, that way you won't get an error code.
@SpaMio-vv4nq4 жыл бұрын
@@MCPHILL awesome thank you again for your confirmation.
@davidking14264 жыл бұрын
Did you get led installed?
@antoniopinto89 Жыл бұрын
Hi i have a question, do you know the clearance or the dimensions roughly on how big the heat sink can be? As i am worried if i buy my LED headlight and the heatsink might be too big? Thank you in advance! Thinking of getting the GTR LIGHTING Ultra 2 or the LASFIT LS Plus series but am concern of the clearance and i am worried it might not fit
@MCPHILL Жыл бұрын
I'm honestly not sure. There seems to be a decent amount of room. Worse case scenario, you can return them.
@kcoquete4 жыл бұрын
The reason your beam is like that is because projectors are not compatible with cheaper LED bulbs, since a projector requires a lot of forward lighting, that’s why HID are the preferred for halogen projectors
@MCPHILL4 жыл бұрын
Actually I've tried 3 different kinds of led bulbs and the best ones are the cheaper ones, beam pattern is all about where the chip is on the bulb housing
@travisspaulding9540 Жыл бұрын
@@MCPHILL Couldn’t I in theory just take the lights from a sport edition and put them in my 2019 Elantra?
@MCPHILL Жыл бұрын
@@travisspaulding9540 I'm not sure I have always wondered that same thing lol
@travisspaulding9540 Жыл бұрын
@@MCPHILL if nothing but the trim is different, I don’t feel like it would hurt anything. I was just wondering before I bought those lights
@VanillaWahlberg Жыл бұрын
@@travisspaulding9540 Just to answer this, no. The HID's actually are very similar in terms of install, but actually have a metal bar that requires removing two screws to uninstall/install. I'm blown away I'm going to have to remove a bumper and headlight assembly to remove a bulb...
@sheegal4 жыл бұрын
Seriously, should appreciate you for this heavy work, but should have watched @ralph longo s video, it would have made your workmuch easier
@naomi.kautzky2 жыл бұрын
The hurt in this guys voice at the end killed me :/
@MCPHILL2 жыл бұрын
Lol
@naomi.kautzky2 жыл бұрын
@@MCPHILL did you end up finding a good light to use?
@MCPHILL2 жыл бұрын
@@naomi.kautzky I just ended up going with a good rated one on Amazon, then they went out of business and I sold the elantra lol🤷♂️
@theandy301934 жыл бұрын
Dang dude I struggled hrs so that I didn't have to take off the entire friggin headlight housing and bumper
@MCPHILL4 жыл бұрын
I can change a bulb in about 20 min doing it this way
@ammaralgabar11713 жыл бұрын
عمل رائع استمر
@marcr8304 жыл бұрын
I bought a 2020 SEL and at night a can’t see more than 20 feet in front of the car with the low beams on. Any way to adjust the angle of the lights?
@MCPHILL4 жыл бұрын
Yes I have a video on adjusting the beams
@johnjackson19244 жыл бұрын
Did adjusting help the problem? I just bought a 2020 sel as well and can't see anything at night.
@marcr8304 жыл бұрын
John Jackson yes I raised up the lights but now other drivers think I have my high beams on, but at least I can see. I think this is a serious flaw with this car that Hyundai needs to address.
@MCPHILL4 жыл бұрын
@@marcr830 I agree, I can see better with led headlights but not as good as other cars. I think it's a flaw with their projector design
@johnjackson19244 жыл бұрын
@@marcr830 I can see alright with my low beams, it's my high beams I can't see with. Going to try adjusting them and see how it goes. Fingers crossed.
@firstinlastout2 жыл бұрын
Hey, my high beams haven't worked since I bought this car. Any suggestions? Thanks
@MCPHILL2 жыл бұрын
Check the relay and fues, high beams on this model use an actuator at each headlight housing to move the projection lens up and down
@JohnWilliams-bq7om3 жыл бұрын
I have a 2019 sel and the highs wont work at all. I also want to upgrade to leds any suggestions?
@MCPHILL3 жыл бұрын
Check all of the fueses, it's probably under the dash or could be a relay
@MCPHILL3 жыл бұрын
And as far as led bulbs go I would just go on Amazon and sort by highest rated.
@AZTech254 жыл бұрын
Any idea why my passenger light always is in high beam mode??? I hear a click from the drivers side and it goes from low to high just fine but my passenger side stays on high always! My car is a 2019 elantra sel and i bought hikari Led lights from amazon. Im getting peopel flashing me casue my light is always on high beam
@MCPHILL4 жыл бұрын
The wires on the bottom of the bulb are backwards, if you are still having issues let me know
@sukrutjoshi5682 Жыл бұрын
Don’t understand but why they made it so difficult 😣… rather just from the top we can actually change it
@trevonnejackson80643 ай бұрын
What brand of headlight bulbs did you install?
@itz_pluto38912 жыл бұрын
Do I have to use the canbus leds for all the bulbs or just the drls?
@MCPHILL2 жыл бұрын
You have to use them for your drl, turn signals and brake lights. Pretty much any light that flashes or changes brightness
@vmt88 Жыл бұрын
Thank you for your time and patience. This is complete BS by Hyundai😡😡😡😡😡
@darrencalderon4 жыл бұрын
Do you know what’s the bulb type for the DRLs? And do you know if LED will work for the DRL without triggering an error
@MCPHILL4 жыл бұрын
They are 1157 bulbs that use double filament. I actually ordered some LEDs for them so I will let you know. I'm pretty sure it will not show an error message but we will see lol
@darrencalderon4 жыл бұрын
MCPHILL sounds good. So is it dual filament because it’s at full brightness when headlights are off and when headlights are turned on the DRLs dim?
@darrencalderon4 жыл бұрын
I got myself a set of LEDs too I’m going to risk it I guess lol I got canbus ones tho so hopefully that helps
@MCPHILL4 жыл бұрын
@@darrencalderon yep that's correct, I also have no idea why but they use a dual filament bulb for the turn signals in the front from the factory and only have a hot a neutral wire running to the base?!?!?
@darrencalderon4 жыл бұрын
MCPHILL oh really that’s really odd lol you would think the turn single would only use a single filament maybe for ease of manufacturing they kept the dual filament bulbs for assembly haha
@micway712 жыл бұрын
At 11:46, did you place the bulb in around the 8 o’clock ? On yours did the led have to be placed at 3 & 9? Just didn’t seem there was enough turn to get at 3 & 9. On your year and mine the headlight assembly looks the same. 20- and my 22. You can’t see the bulb orientation from the outside I think.
@MCPHILL2 жыл бұрын
To be honest whenever it latched in I kept it that way because at that time I was unaware of rotating the bulb for proper beam adjustment
@micway712 жыл бұрын
@@MCPHILL Fair enough. You might not even have the Elantra anymore which would make you less interested. Thanks for responding!
@MCPHILL2 жыл бұрын
@@micway71 ya I don't have it anymore, I'm always happy to help
@micway712 жыл бұрын
@@MCPHILL that you did! What are you sporting these days? Hell I trade cars every 2-3 years.
@MCPHILL2 жыл бұрын
@@micway71 I have a 17 santa fe sport, that is burning oil at 50k miles 😑
@edenfloyd62813 ай бұрын
is there an easier way to do this? i’m not taking my whole headlight out i’m just not doing it
@MCPHILL3 ай бұрын
Some people with small hands can go through the wheel well
@usamasaid28604 жыл бұрын
What type of LED recommend for the front please let me know whit no error code please!!!
How do you adjust the headlights in the 19 elantra?
@MCPHILL2 жыл бұрын
m.kzbin.info/www/bejne/eJuof5yoi96grtE
@joshuabrooks16612 жыл бұрын
Thank you
@MCPHILL2 жыл бұрын
@@joshuabrooks1661 no problem
@erickgonzalez7931 Жыл бұрын
Where did you get that the lights from?
@MCPHILL Жыл бұрын
They don't sell them anymore, I would just look on amazon and filter 4 stars and above
@user-to1xj5cc5m Жыл бұрын
Does your car not have the led dtr strips around the headlight?
@MCPHILL Жыл бұрын
No, this trim doesn't have that option
@user-to1xj5cc5m Жыл бұрын
@@MCPHILL probably why I’m having problems locating bulbs. Mine is the 2019 Elantra preferred but seems like there are 2 different headlight types for that trim. Very confusing I wish mine was simple like your trim.
@MCPHILL Жыл бұрын
@@user-to1xj5cc5m are you in the US?
@user-to1xj5cc5m Жыл бұрын
@@MCPHILL Canada
@MCPHILL Жыл бұрын
@Brando Phil that's why the US version is a SEL, and they were different
@DanDan-fu6sd2 жыл бұрын
I wish I had watched this video before i bought my Elantra. This is ridiculous. Hyundai messed up.
@montrellwright53642 ай бұрын
i need help with the signal loght
@maksimgoman50034 жыл бұрын
Hi. Could you please sent me a link where you buy this bulb? Thanks!!!
@MCPHILL4 жыл бұрын
The bulb I am using is no longer available
@maksimgoman50034 жыл бұрын
@@MCPHILL Thanks for the replay, The size of bulb is 9005?
@MCPHILL4 жыл бұрын
@@maksimgoman5003 yes it is
@maksimgoman50034 жыл бұрын
@@MCPHILL Thanks!!!
@lolitabatchelor46012 жыл бұрын
It's ridiculous that you can't just change the light bulb without taking the car apart. I have a fleet car and so I'm not allowed to do it myself so I have to make an appointment to get my headlight changed and I can't get an appointment till September 7th.
@MCPHILL2 жыл бұрын
Dang that really sucks
@madbros-r-us45493 жыл бұрын
There's around 4-5 clips you can take off and if you push hard enough, you can "pop" the wheel well down and fit ur hand in there without having to fuss over taking the bumper out. Good video though. Annoyed that I have to adjust my set more on the passenger's side 😒
@MCPHILL3 жыл бұрын
I just wish they made it easier
@Jpee1233 жыл бұрын
He must of had nothing to do that day,,he took the scenic route,,lol wheel well is the way to go.👍
@MCPHILL3 жыл бұрын
Ever since I was little I have to tear everything apart to see how it works lol
@Jpee1233 жыл бұрын
Lucky guy,,blessed with the power of curiosity! Good for you 👍
@ericklozano664010 ай бұрын
Where did you purchase the headlights ?
@MCPHILL10 ай бұрын
They no longer sell that brand. I swapped to Lasfit and they are even brighter www.amazon.com/s?k=lasfit+led&ref=nb_sb_noss
@ericklozano664010 ай бұрын
@@MCPHILL appreciate it. Thank you.
@MCPHILL10 ай бұрын
@@ericklozano6640 no problem
@jimduffenais39962 жыл бұрын
Is the 2020 headlight bulb a dual beam or single?
@MCPHILL2 жыл бұрын
Dual, it uses an actuator to adjust the bulb angle
@jimduffenais39962 жыл бұрын
@@MCPHILL actuator? Is there a special 9005 bulb or only one style?
@MCPHILL2 жыл бұрын
@@jimduffenais3996 any style
@jimduffenais39962 жыл бұрын
@@MCPHILL thanks...i will pick some up soon. Cheers
@jimduffenais39962 жыл бұрын
Can you reccomend a set from amazon? $30-40 range?
@tomrob36542 жыл бұрын
This is insane. Pull the bumper shroud just to change a headlight bulb? What engineering moron thought that that was the way to go?
@peterlindvall7671 Жыл бұрын
Volvo C30 headlights come out in under 60 seconds. You pull a pin, and the headlight slides out.
@ishanr5153 Жыл бұрын
Instead take wheel out than take our fender liner and that's it.
@956VasquezIII4 жыл бұрын
What size is the bulb?
@MCPHILL4 жыл бұрын
9005
@956VasquezIII4 жыл бұрын
Are the 9005 for high and low beams or just low beams?
@MCPHILL4 жыл бұрын
9005 are hi/low
@cidkramer4 жыл бұрын
They're high beams but the projector allows them to be dual purpose. When you activate the high beams you'll hear an actuator move in the headlight assembly. I have 9006 and 9005 in my older car.. Each have their role as separate bulbs
@davidking14264 жыл бұрын
@@cidkramer I was looking for this answer everywhere!! I couldn't figure out how 9005 can be dual beam! Thanks Dave!!
@user-on6mx2pf6b6 ай бұрын
I did it by squeezing my hand in nobody could and on my 2nd spure because my dad said anyone can fought
@-abbas09 ай бұрын
فك الصدام الامامي
@user-ib9sb7vj2j3 жыл бұрын
How to take off the transparent assembly of the lamp because the high is idle
Seriously, does anyone know of a lawsuit concerning this?
@MCPHILL7 ай бұрын
There won't be any for a headlight bulb. All the new cars with LEDs aren't even replaceable. You have to buy the assembly
@jackmehoff03713 жыл бұрын
I accomplished all this without taking the dsmn bumper off. Just saying
@stevegibbons8093 жыл бұрын
It sucks the lights are so lame in the first place, I have an Elantra work vehicle, liked the warranty and mileage so I bought a 2020 Santa Fe and the lights are bright .
@fazzi4924 Жыл бұрын
jesus christ. I have a 2019 and the stock bulb just finally died for the first time so I have to replace it and decided to look it up before just trying to do it. I'll never understand why they can't just make bulb replacement accessible without all this bullshit. it should be a 2 second job, not a hour long process of taking your entire front end apart.
@MCPHILL Жыл бұрын
I think their plan was to try and make everyone take it to a dealer
@freedomfyter2 жыл бұрын
Are you serious? Hyundai made it this difficult to change a lousy headlight bulb!!
@MCPHILL2 жыл бұрын
Pretty much, some people with tiny hands can go through the wheel well
@AISciFiStories Жыл бұрын
This tutorial is WAY too complicated. All I did was unscrew the one screw and those two plastic cap thingies on the left tire he shows here. And I was able to reach my hand in, take off the cap, and take the light out (while attacked to the cable) swap the light, place it back, twist it in, and put the cap on and that’s it. Me right light I could open and take out with my hand there. Took me 15 minutes.
@padywac19707 ай бұрын
I am absolutely pissed off about this! Changing an auto bulb should be as easy as changing any other bulb.
@MCPHILL7 ай бұрын
They have to make money somehow
@Showbiztrends001 Жыл бұрын
Hyundai didn’t do well just to fix a bulbs and this nonsense stress
@padywac19707 ай бұрын
This design is criminal.
@padywac1970 Жыл бұрын
This is ridiculous. All for a bulb change? This should be illegal.
@WhiteR19932 жыл бұрын
All this for some simple bulb changeout.. smh
@MasterSumai Жыл бұрын
28 mins. isn't "real quick"
@MCPHILL Жыл бұрын
It is what it is 🤷♂️
@jay94143 жыл бұрын
Yaak, you have to take all that out to change just the pulp. Hyundai failure.
@MCPHILL3 жыл бұрын
Some people can do it through the wheel well
@jay94143 жыл бұрын
Oh okay. But hey thanks for sharing. I like it though.
@HerbalistAce3 жыл бұрын
Mine isnt a philips screw. Mine is yet another bolt. And I have no wrenches 😡🤷♂️ Hyundai is garbage. Thats all I gotta say. If I had known I had to take the whole bumper off just to change a bulb. Pathetic. Very pathetic. BUT I MANAGED TO get the headlight cap off. So no need to take off the bumper now!
@HerbalistAce3 жыл бұрын
Nvm my retarded butt took off the wrong drives side cap.
@MCPHILL3 жыл бұрын
It's a very bad design, but I think they do it that way you take it to the dealership so they can make more money
@HerbalistAce3 жыл бұрын
@@MCPHILL yep. Eventually you're gonna have to take the whole engine block out lol.
@MCPHILL3 жыл бұрын
@@HerbalistAce no kidding lol
@HerbalistAce3 жыл бұрын
@@MCPHILL I wont ever be getting a hyundai again. And all this bs does is go to my list of what I need to look for in my next car in 4 years.
@MrGsteele2 жыл бұрын
What an absolute fucking absurdity to have to take a car's front end apart just to change a headlight bulb. Hyundai engineers are gross incompetents for designing the car this way. It's like having to remove a car's oil pan to change the oil - or the heads to replace spark plugs. I'm so sick of pathetic engineering jobs like this that take what should be a 5 minute job and make it an hour's work, climbing under a car and stripping it just to get at a bulb. Hyundai sucks.